X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fda830evm.h;h=198892ba571de796208417e045dc6137271b4670;hb=47b8e527448c94d09fc8dbdb6601ea7a605ff955;hp=38e2ce1f1c60f987520ceeb9be36d56ac49352e0;hpb=bb3bcfa2426cc6a0aecec7270e3ee67ca843a125;p=u-boot

diff --git a/include/configs/da830evm.h b/include/configs/da830evm.h
index 38e2ce1f1c..198892ba57 100644
--- a/include/configs/da830evm.h
+++ b/include/configs/da830evm.h
@@ -27,6 +27,8 @@
 /*
  * Board
  */
+#define CONFIG_DRIVER_TI_EMAC
+#define CONFIG_USE_SPIFLASH
 
 /*
  * SoC Configuration
@@ -40,19 +42,17 @@
 #define CONFIG_SYS_HZ_CLOCK		clk_get(DAVINCI_AUXCLK_CLKID)
 #define CONFIG_SYS_HZ			1000
 #define CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_SKIP_RELOCATE_UBOOT	/* to a proper address, init done */
+#define CONFIG_SYS_TEXT_BASE		0xc1080000
 
 /*
  * Memory Info
  */
 #define CONFIG_SYS_MALLOC_LEN	(0x10000 + 1*1024*1024) /* malloc() len */
-#define CONFIG_SYS_GBL_DATA_SIZE	128 /* reserved for initial data */
-#define PHYS_SDRAM_1		DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */
-#define PHYS_SDRAM_1_SIZE	(64 << 20) /* SDRAM size 64MB */
-#define CONFIG_SYS_MEMTEST_START	PHYS_SDRAM_1 /* memtest start addr */
-#define CONFIG_SYS_MEMTEST_END 	(PHYS_SDRAM_1 + 16*1024*1024) /* 16MB test */
+#define PHYS_SDRAM_1			0xc0000000 /* SDRAM Start */
+#define CONFIG_SYS_MEMTEST_START	(PHYS_SDRAM_1 + 0x2000000)
+#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + \
+						(32 << 20))
 #define CONFIG_NR_DRAM_BANKS	1 /* we have 1 bank of DRAM */
-#define CONFIG_STACKSIZE	(256*1024) /* regular stack */
 
 /*
  * Serial Driver info
@@ -64,7 +64,6 @@
 #define CONFIG_SYS_NS16550_CLK	clk_get(DAVINCI_UART2_CLKID)
 #define CONFIG_CONS_INDEX	1		/* use UART0 for console */
 #define CONFIG_BAUDRATE		115200		/* Default baud rate */
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * I2C Configuration
@@ -92,7 +91,6 @@
 #define CONFIG_BOOTP_DNS2
 #define CONFIG_BOOTP_SEND_HOSTNAME
 #define CONFIG_NET_RETRY_COUNT	10
-#define CONFIG_NET_MULTI
 #endif
 
 /*
@@ -103,17 +101,17 @@
 #define CONFIG_NAND_DAVINCI
 #define CONFIG_SYS_NO_FLASH
 #define CONFIG_ENV_IS_IN_NAND		/* U-Boot env in NAND Flash  */
-#define CONFIG_ENV_OFFSET		0x0 /* Block 0--not used by bootcode */
-#define CONFIG_ENV_SIZE			(128 << 10)
+#define CONFIG_ENV_OFFSET		(512 << 10)
+#define CONFIG_ENV_SIZE			(10 << 10) /* 10KB */
+#define CONFIG_SYS_NAND_USE_FLASH_BBT
 #define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST
+#define CONFIG_SYS_NAND_PAGE_2K
 #define CONFIG_SYS_NAND_CS		3
 #define CONFIG_SYS_NAND_BASE		DAVINCI_ASYNC_EMIF_DATA_CE3_BASE
-#define CONFIG_SYS_CLE_MASK		0x10
-#define CONFIG_SYS_ALE_MASK		0x8
-#define CONFIG_SYS_NAND_HW_ECC
+#define CONFIG_SYS_NAND_PAGE_2K
+#define CONFIG_SYS_NAND_MASK_CLE		0x10
+#define CONFIG_SYS_NAND_MASK_ALE		0x8
 #define CONFIG_SYS_MAX_NAND_DEVICE	1 /* Max number of NAND devices */
-#define NAND_MAX_CHIPS			1
-#define DEF_BOOTM			""
 #endif
 
 #ifdef CONFIG_USE_NOR
@@ -145,28 +143,31 @@
 #define CONFIG_DAVINCI_SPI
 #define CONFIG_SYS_SPI_BASE		DAVINCI_SPI0_BASE
 #define CONFIG_SYS_SPI_CLK		clk_get(DAVINCI_SPI0_CLKID)
-#define CONFIG_SF_DEFAULT_SPEED		50000000
-#define CONFIG_SYS_ENV_SPI_MAX_HZ	CONFIG_SF_DEFAULT_SPEED
+#define CONFIG_SF_DEFAULT_SPEED		30000000
+#define CONFIG_ENV_SPI_MAX_HZ		CONFIG_SF_DEFAULT_SPEED
 #endif
 
+/*
+ * USB configuration
+ */
+#define CONFIG_USB_DA8XX	/* Platform hookup to MUSB controller */
+#define CONFIG_MUSB_HCD
 
 /*
  * U-Boot general configuration
  */
-#undef CONFIG_USE_IRQ			/* No IRQ/FIQ in U-Boot */
 #undef CONFIG_MISC_INIT_R
 #undef CONFIG_BOOTDELAY
 #define CONFIG_BOOTFILE		"uImage" /* Boot file name */
-#define CONFIG_SYS_PROMPT	"DA830-evm > " /* Command Prompt */
+#define CONFIG_SYS_PROMPT	"U-Boot > " /* Command Prompt */
 #define CONFIG_SYS_CBSIZE	1024 /* Console I/O Buffer Size	*/
 #define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 #define CONFIG_SYS_MAXARGS	16 /* max number of command args */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */
-#define CONFIG_SYS_LOAD_ADDR	(CONFIG_SYS_MEMTEST_START + 0x700000)
+#define CONFIG_SYS_LOAD_ADDR	(PHYS_SDRAM_1 + 0x700000)
 #define CONFIG_VERSION_VARIABLE
 #define CONFIG_AUTO_COMPLETE	/* Won't work with hush so far, may be later */
 #define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_CRC32_VERIFY
@@ -175,7 +176,7 @@
 /*
  * Linux Information
  */
-#define LINUX_BOOT_PARAM_ADDR	(CONFIG_SYS_MEMTEST_START + 0x100)
+#define LINUX_BOOT_PARAM_ADDR	(PHYS_SDRAM_1 + 0x100)
 #define CONFIG_CMDLINE_TAG
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_BOOTARGS		"mem=32M console=ttyS2,115200n8 root=/dev/mtdblock/2 rw noinitrd ip=dhcp"
@@ -196,7 +197,10 @@
 #define CONFIG_CMD_MEMORY
 #undef CONFIG_CMD_FPGA
 #undef CONFIG_CMD_SETGETDCR
-#define CONFIG_CMD_EEPROM
+
+#ifdef CONFIG_CMD_BDI
+#define CONFIG_CLOCKS
+#endif
 
 #ifndef CONFIG_DRIVER_TI_EMAC
 #undef CONFIG_CMD_NET
@@ -211,14 +215,14 @@
 #define CONFIG_CMD_NAND
 #define CONFIG_CMD_MTDPARTS
 #define CONFIG_MTD_PARTITIONS
-#define CONFIG_CMD_UBI
-#define CONFIG_RBTREE
+#define CONFIG_MTD_DEVICE
 #endif
 
 #ifdef CONFIG_USE_SPIFLASH
 #undef CONFIG_CMD_IMLS
 #undef CONFIG_CMD_FLASH
 #define CONFIG_CMD_SPI
+#define CONFIG_CMD_SF
 #define CONFIG_CMD_SAVEENV
 #endif
 
@@ -234,10 +238,51 @@
 #endif
 
 #ifdef CONFIG_USB_DA8XX
-#define CONFIG_CMD_USB		/* include support for usb	*/
-#define CONFIG_CMD_STORAGE	/* include support for usb	*/
-#define CONFIG_CMD_FAT		/* include support for FAT/storage*/
-#define CONFIG_DOS_PARTITION	/* include support for FAT/storage*/
+
+#ifdef CONFIG_MUSB_HCD		/* include support for usb host */
+#define CONFIG_CMD_USB		/* include support for usb cmd */
+
+#define CONFIG_USB_STORAGE	/* MSC class support */
+#define CONFIG_CMD_STORAGE	/* inclue support for usb-storage cmd */
+#define CONFIG_CMD_FAT		/* inclue support for FAT/storage */
+#define CONFIG_DOS_PARTITION	/* inclue support for FAT/storage */
+
+#ifdef CONFIG_USB_KEYBOARD	/* HID class support */
+#define CONFIG_SYS_USB_EVENT_POLL
+#define CONFIG_PREBOOT "usb start"
+#endif /* CONFIG_USB_KEYBOARD */
+
+#endif /* CONFIG_MUSB_HCD */
+
+#ifdef CONFIG_MUSB_UDC
+/* USB device configuration */
+#define CONFIG_USB_DEVICE		1
+#define CONFIG_USB_TTY			1
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV	1
+/* Change these to suit your needs */
+#define CONFIG_USBD_VENDORID		0x0451
+#define CONFIG_USBD_PRODUCTID		0x5678
+#define CONFIG_USBD_MANUFACTURER	"Texas Instruments"
+#define CONFIG_USBD_PRODUCT_NAME	"DA830EVM"
+#endif /* CONFIG_MUSB_UDC */
+
+#endif /* CONFIG_USB_DA8XX */
+
+#ifdef CONFIG_MTD_PARTITIONS
+#define MTDIDS_DEFAULT		"nand0=davinci_nand.1"
+#define PART_BOOT		"512k(bootloader)ro,"
+#define PART_PARAMS		"512k(params)ro,"
+#define PART_KERNEL		"4m(kernel),"
+#define PART_REST		"-(filesystem)"
+#define MTDPARTS_DEFAULT        \
+	"mtdparts=davinci_nand.1:" PART_BOOT PART_PARAMS PART_KERNEL PART_REST
 #endif
 
+#define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/
+
+/* additions for new relocation code, must be added to all boards */
+#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_SP_ADDR		\
+	(CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)
+
 #endif /* __CONFIG_H */