X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fdavinci_schmoogie.h;h=8eb7af921c092b6237a555de6879e16cf970c4ff;hb=833b6435de3e8cf5b06ba81cb1b2b50e044269ff;hp=6612cb3cbb1d95a0a872b4579aaf625b513cde20;hpb=7a4f511b59f08f51dde4ceacbd45f49b8bf2a5cc;p=u-boot

diff --git a/include/configs/davinci_schmoogie.h b/include/configs/davinci_schmoogie.h
index 6612cb3cbb..8eb7af921c 100644
--- a/include/configs/davinci_schmoogie.h
+++ b/include/configs/davinci_schmoogie.h
@@ -19,7 +19,6 @@
 
 #ifndef __CONFIG_H
 #define __CONFIG_H
-#include <asm/sizes.h>
 
 /*=======*/
 /* Board */
@@ -27,7 +26,9 @@
 #define SCHMOOGIE
 #define CONFIG_SYS_NAND_LARGEPAGE
 #define CONFIG_SYS_USE_NAND
-#define CONFIG_DISPLAY_CPUINFO
+#define MACH_TYPE_SCHMOOGIE 1255
+#define CONFIG_MACH_TYPE MACH_TYPE_SCHMOOGIE
+
 /*===================*/
 /* SoC Configuration */
 /*===================*/
@@ -40,11 +41,9 @@
 /* Memory Info */
 /*=============*/
 #define CONFIG_SYS_MALLOC_LEN		(0x10000 + 256*1024)	/* malloc() len */
-#define CONFIG_SYS_GBL_DATA_SIZE	128		/* reserved for initial data */
 #define CONFIG_SYS_MEMTEST_START	0x80000000	/* memtest start address */
 #define CONFIG_SYS_MEMTEST_END		0x81000000	/* 16MB RAM test */
 #define CONFIG_NR_DRAM_BANKS	1		/* we have 1 bank of DRAM */
-#define CONFIG_STACKSIZE	(256*1024)	/* regular stack */
 #define PHYS_SDRAM_1		0x80000000	/* DDR Start */
 #define PHYS_SDRAM_1_SIZE	0x08000000	/* DDR size 128MB */
 #define DDR_4BANKS				/* 4-bank DDR2 (128MB) */
@@ -58,7 +57,6 @@
 #define CONFIG_SYS_NS16550_CLK	CONFIG_SYS_HZ_CLOCK	/* Input clock to NS16550 */
 #define CONFIG_CONS_INDEX	1		/* use UART0 for console */
 #define CONFIG_BAUDRATE		115200		/* Default baud rate */
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 /*===================*/
 /* I2C Configuration */
 /*===================*/
@@ -83,11 +81,11 @@
 #undef CONFIG_ENV_IS_IN_FLASH
 #define CONFIG_SYS_NO_FLASH
 #define CONFIG_NAND_DAVINCI
+#define CONFIG_SYS_NAND_CS		2
 #define CONFIG_ENV_IS_IN_NAND		/* U-Boot env in NAND Flash  */
 #define CONFIG_ENV_SECT_SIZE	2048	/* Env sector Size */
-#define CONFIG_ENV_SIZE		SZ_128K
+#define CONFIG_ENV_SIZE		(128 << 10)	/* 128 KiB */
 #define CONFIG_SKIP_LOWLEVEL_INIT	/* U-Boot is loaded by a bootloader */
-#define CONFIG_SKIP_RELOCATE_UBOOT	/* to a proper address, init done */
 #define CONFIG_SYS_NAND_BASE		0x02000000
 #define CONFIG_SYS_NAND_HW_ECC
 #define CONFIG_SYS_MAX_NAND_DEVICE	1	/* Max number of NAND devices */
@@ -97,13 +95,11 @@
 /*=====================*/
 #define CONFIG_RTC_DS1307		/* RTC chip on SCHMOOGIE */
 #define CONFIG_SYS_I2C_RTC_ADDR	0x6f	/* RTC chip I2C address */
-#define CONFIG_HAS_UID
 #define CONFIG_UID_DS28CM00		/* Unique ID on SCHMOOGIE */
 #define CONFIG_SYS_UID_ADDR		0x50	/* UID chip I2C address */
 /*==============================*/
 /* U-Boot general configuration */
 /*==============================*/
-#undef	CONFIG_USE_IRQ			/* No IRQ/FIQ in U-Boot */
 #define CONFIG_MISC_INIT_R
 #undef CONFIG_BOOTDELAY
 #define CONFIG_BOOTFILE		"uImage"	/* Boot file name */
@@ -116,7 +112,6 @@
 #define CONFIG_VERSION_VARIABLE
 #define CONFIG_AUTO_COMPLETE		/* Won't work with hush so far, may be later */
 #define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_CRC32_VERIFY
@@ -148,11 +143,17 @@
 #undef CONFIG_CMD_SETGETDCR
 #undef CONFIG_CMD_FLASH
 #undef CONFIG_CMD_IMLS
-/*=======================*/
-/* KGDB support (if any) */
-/*=======================*/
-#ifdef CONFIG_CMD_KGDB
-#define CONFIG_KGDB_BAUDRATE	115200	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	1	/* which serial port to use */
+
+#ifdef CONFIG_CMD_BDI
+#define CONFIG_CLOCKS
 #endif
+
+#define CONFIG_MAX_RAM_BANK_SIZE	(256 << 20)	/* 256 MB */
+
+#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_RAM_SIZE	0x1000
+#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_SDRAM_BASE + \
+					 CONFIG_SYS_INIT_RAM_SIZE - \
+					 GENERATED_GBL_DATA_SIZE)
+
 #endif /* __CONFIG_H */