X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fdevkit3250.h;h=6e95064fe16aaeba356470e6395974f1777f1278;hb=e38f5fc8d80d946b401ba0e9ba0fcb52d6e7e74b;hp=d89e661b6b5a131f513e502eec67cda602d0a2b6;hpb=e4aa8edb6e5cae256a5c5a3c5cd30e05e8f5a2b4;p=u-boot

diff --git a/include/configs/devkit3250.h b/include/configs/devkit3250.h
index d89e661b6b..6e95064fe1 100644
--- a/include/configs/devkit3250.h
+++ b/include/configs/devkit3250.h
@@ -13,10 +13,6 @@
 #include <linux/sizes.h>
 #include <asm/arch/cpu.h>
 
-/*
- * Define DevKit3250 machine type by hand until it lands in mach-types
- */
-#define MACH_TYPE_DEVKIT3250		3697
 #define CONFIG_MACH_TYPE		MACH_TYPE_DEVKIT3250
 
 #define CONFIG_SYS_ICACHE_OFF
@@ -24,7 +20,6 @@
 #if !defined(CONFIG_SPL_BUILD)
 #define CONFIG_SKIP_LOWLEVEL_INIT
 #endif
-#define CONFIG_BOARD_EARLY_INIT_F
 
 /*
  * Memory configurations
@@ -33,7 +28,7 @@
 #define CONFIG_SYS_MALLOC_LEN		SZ_1M
 #define CONFIG_SYS_SDRAM_BASE		EMC_DYCS0_BASE
 #define CONFIG_SYS_SDRAM_SIZE		SZ_64M
-#define CONFIG_SYS_TEXT_BASE		0x83FA0000
+#define CONFIG_SYS_TEXT_BASE		0x83F00000
 #define CONFIG_SYS_MEMTEST_START	(CONFIG_SYS_SDRAM_BASE + SZ_32K)
 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_TEXT_BASE - SZ_1M)
 
@@ -46,7 +41,13 @@
  * Serial Driver
  */
 #define CONFIG_SYS_LPC32XX_UART		5   /* UART5 */
-#define CONFIG_BAUDRATE			115200
+
+/*
+ * DMA
+ */
+#if !defined(CONFIG_SPL_BUILD)
+#define CONFIG_DMA_LPC32XX
+#endif
 
 /*
  * I2C
@@ -54,7 +55,6 @@
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_LPC32XX
 #define CONFIG_SYS_I2C_SPEED		100000
-#define CONFIG_CMD_I2C
 
 /*
  * GPIO
@@ -66,7 +66,6 @@
  */
 #define CONFIG_LPC32XX_SSP
 #define CONFIG_LPC32XX_SSP_TIMEOUT	100000
-#define CONFIG_CMD_SPI
 
 /*
  * Ethernet
@@ -77,9 +76,6 @@
 #define CONFIG_PHYLIB
 #define CONFIG_PHY_ADDR			0x1F
 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
 
 /*
  * NOR Flash
@@ -114,8 +110,15 @@
 #define CONFIG_SYS_NAND_PAGE_SIZE		NAND_LARGE_BLOCK_PAGE_SIZE
 #define CONFIG_SYS_NAND_USE_FLASH_BBT
 
+#define CONFIG_CMD_JFFS2
 #define CONFIG_CMD_NAND
 
+/*
+ * USB
+ */
+#define CONFIG_USB_OHCI_LPC32XX
+#define CONFIG_USB_ISP1301_I2C_ADDR		0x2d
+
 /*
  * U-Boot General Configurations
  */
@@ -128,14 +131,10 @@
 
 #define CONFIG_AUTO_COMPLETE
 #define CONFIG_CMDLINE_EDITING
-#define CONFIG_VERSION_VARIABLE
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DOS_PARTITION
 
 /*
  * Pass open firmware flat tree
  */
-#define CONFIG_OF_LIBFDT
 
 /*
  * Environment
@@ -163,15 +162,12 @@
 /*
  * U-Boot Commands
  */
-#define CONFIG_CMD_CACHE
 
 /*
  * Boot Linux
  */
 #define CONFIG_CMDLINE_TAG
 #define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_ZERO_BOOTDELAY_CHECK
-#define CONFIG_BOOTDELAY		1
 
 #define CONFIG_BOOTFILE			"uImage"
 #define CONFIG_BOOTARGS			"console=ttyS0,115200n8"
@@ -189,16 +185,12 @@
 
 /* Use the framework and generic lib */
 #define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
 
 /* SPL will use serial */
-#define CONFIG_SPL_SERIAL_SUPPORT
 
 /* SPL loads an image from NAND */
 #define CONFIG_SPL_NAND_SIMPLE
 #define CONFIG_SPL_NAND_RAW_ONLY
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_NAND_DRIVERS
 
 #define CONFIG_SPL_NAND_ECC