X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fds414.h;h=27308c92ffb99a55cde2ed7629d2db68453abcd3;hb=38cad04e2d07d5833114831d6f92c759a9253fe7;hp=2c83a716a38436df02f95fb8b8b45fb64aff45f1;hpb=d09ec7f81650425140776995fc9752189ddf7956;p=u-boot

diff --git a/include/configs/ds414.h b/include/configs/ds414.h
index 2c83a716a3..27308c92ff 100644
--- a/include/configs/ds414.h
+++ b/include/configs/ds414.h
@@ -1,7 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2014 Stefan Roese <sr@denx.de>
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef _CONFIG_SYNOLOGY_DS414_H
@@ -10,20 +9,17 @@
 /*
  * High Level Configuration Options (easy to change)
  */
-#define CONFIG_DISPLAY_BOARDINFO_LATE
 
 /*
  * TEXT_BASE needs to be below 16MiB, since this area is scrubbed
  * for DDR ECC byte filling in the SPL before loading the main
  * U-Boot into it.
  */
-#define	CONFIG_SYS_TEXT_BASE	0x00800000
 #define CONFIG_SYS_TCLK		250000000	/* 250MHz */
 
 /*
  * Commands configuration
  */
-#define CONFIG_CMD_ENV
 
 /* I2C */
 #define CONFIG_SYS_I2C
@@ -37,28 +33,20 @@
 #define CONFIG_SF_DEFAULT_MODE		SPI_MODE_3
 
 /* Environment in SPI NOR flash */
-#define CONFIG_ENV_IS_IN_SPI_FLASH
 #define CONFIG_ENV_OFFSET		0x7E0000   /* RedBoot config partition in DTS */
 #define CONFIG_ENV_SIZE			(64 << 10) /* 64KiB */
 #define CONFIG_ENV_SECT_SIZE		(64 << 10) /* 64KiB sectors */
 
-#define CONFIG_PHY_MARVELL		/* there is a marvell phy */
-#define CONFIG_PHY_ADDR			{ 0x1, 0x0 }
 #define CONFIG_SYS_NETA_INTERFACE_TYPE	PHY_INTERFACE_MODE_RGMII
 
-#define CONFIG_SYS_ALT_MEMTEST
-
 /* PCIe support */
 #ifndef CONFIG_SPL_BUILD
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_PCI_ENUM
 #define CONFIG_PCI_MVEBU
 #define CONFIG_PCI_SCAN_SHOW
 #endif
 
 /* USB/EHCI/XHCI configuration */
 
-#define CONFIG_DM_USB
 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 
 /* FIXME: broken XHCI support
@@ -67,19 +55,14 @@
  * - xhci-pci seems to not support DM_USB, so with that enabled it is not
  *   found.
  * - USB init fails, controller does not respond in time */
-#if 0
-#undef CONFIG_DM_USB
-#define CONFIG_USB_XHCI_PCI
-#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
-#endif
 
 #if !defined(CONFIG_USB_XHCI_HCD)
 #define CONFIG_EHCI_IS_TDI
 #endif
 
 /* why is this only defined in mv-common.h if CONFIG_DM is undefined? */
-#define CONFIG_SUPPORT_VFAT
-#define CONFIG_SYS_MVFS
+#define CONFIG_MTD_DEVICE		/* needed for mtdparts commands */
+#define CONFIG_MTD_PARTITIONS
 
 /*
  * mv-common.h should be defined after CMD configs since it used them
@@ -102,7 +85,6 @@
 
 /* SPL */
 /* Defines for SPL */
-#define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_TEXT_BASE		0x40004030
 #define CONFIG_SPL_MAX_SIZE		((128 << 10) - 0x4030)
 
@@ -117,19 +99,13 @@
 #define CONFIG_SPL_BOOTROM_SAVE		(CONFIG_SPL_STACK + 4)
 
 /* SPL related SPI defines */
-#define CONFIG_SPL_SPI_LOAD
 #define CONFIG_SYS_SPI_U_BOOT_OFFS	0x24000
 
 /* DS414 bus width is 32bits */
 #define CONFIG_DDR_32BIT
 
-/* Use random ethernet address if not configured */
-#define CONFIG_LIB_RAND
-#define CONFIG_NET_RANDOM_ETHADDR
-
 /* Default Environment */
 #define CONFIG_BOOTCOMMAND	"sf read ${loadaddr} 0xd0000 0x700000; bootm"
-#define CONFIG_BOOTARGS		"console=ttyS0,115200"
 #define CONFIG_LOADADDR		0x80000
 #undef CONFIG_PREBOOT		/* override preboot for USB and SPI flash init */
 #define CONFIG_PREBOOT		"usb start; sf probe"