X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fedminiv2.h;h=70a698ab328e6392f73cac47a00a4ed3981de3a0;hb=6e2fca94ff4f754024e46e7d986221a75be611f3;hp=f0fb48828ae7e8e74627e0b065b3afb1bd3b7fde;hpb=7cdcaef0b286fa20926d750304442ad770a1fca8;p=u-boot

diff --git a/include/configs/edminiv2.h b/include/configs/edminiv2.h
index f0fb48828a..70a698ab32 100644
--- a/include/configs/edminiv2.h
+++ b/include/configs/edminiv2.h
@@ -6,23 +6,7 @@
  * Marvell Semiconductor <www.marvell.com>
  * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301 USA
+ * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef _CONFIG_EDMINIV2_H
@@ -39,9 +23,7 @@
  */
 
 #define CONFIG_MARVELL		1
-#define CONFIG_ARM926EJS	1	/* Basic Architecture */
 #define CONFIG_FEROCEON		1	/* CPU Core subversion */
-#define CONFIG_ORION5X		1	/* SOC Family Name */
 #define CONFIG_88F5182		1	/* SOC Name */
 #define CONFIG_MACH_EDMINIV2	1	/* Machine type */
 
@@ -50,8 +32,6 @@
  * CLKs configurations
  */
 
-#define CONFIG_SYS_HZ		1000
-
 /*
  * Board-specific values for Orion5x MPP low level init:
  * - MPPs 12 to 15 are SATA LEDs (mode 5)
@@ -69,13 +49,18 @@
  * - GPIO16 is Power LED control (0 = on, 1 = off)
  * - GPIO17 is Power LED source select (0 = CPLD, 1 = GPIO16)
  * - GPIO18 is Power Button status (0 = Released, 1 = Pressed)
- * - Last GPIO is 26, further bits are supposed to be 0.
+ * - GPIO19 is SATA disk power toggle (toggles on 0-to-1)
+ * - GPIO22 is SATA disk power status ()
+ * - GPIO23 is supply status for SATA disk ()
+ * - GPIO24 is supply control for board (write 1 to power off)
+ * Last GPIO is 25, further bits are supposed to be 0.
  * Enable mask has ones for INPUT, 0 for OUTPUT.
- * Default is LED ON.
+ * Default is LED ON, board ON :)
  */
 
-#define ORION5X_GPIO_OUT_ENABLE	0x03fcffff
-#define ORION5X_GPIO_OUT_VALUE	0x03fcffff
+#define ORION5X_GPIO_OUT_ENABLE		0xfef4f0ca
+#define ORION5X_GPIO_OUT_VALUE		0x00000000
+#define ORION5X_GPIO_IN_POLARITY	0x000000d0
 
 /*
  * NS16550 Configuration
@@ -200,7 +185,8 @@
  * I2C related stuff
  */
 #ifdef CONFIG_CMD_I2C
-#define CONFIG_I2C_MVTWSI
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MVTWSI
 #define CONFIG_I2C_MVTWSI_BASE		ORION5X_TWSI_BASE
 #define CONFIG_SYS_I2C_SLAVE		0x0
 #define CONFIG_SYS_I2C_SPEED		100000
@@ -217,7 +203,7 @@
 /*
  * Size of malloc() pool
  */
-#define CONFIG_SYS_MALLOC_LEN	(1024 * 128) /* 128kB for malloc() */
+#define CONFIG_SYS_MALLOC_LEN	(1024 * 256) /* 256kB for malloc() */
 
 /*
  * Other required minimal configurations