X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fgplugd.h;h=98133092470069a5a776287f3afb8f1ee8ecd082;hb=411b9eaf554225c12ca253473002d0381cfec4ff;hp=3ad2de5adbe2aff24cf0d2ea88e0cad52e2c0eda;hpb=aa0ecfeb9d60d82e095daa0d6271f77b2c25d3fb;p=u-boot

diff --git a/include/configs/gplugd.h b/include/configs/gplugd.h
index 3ad2de5adb..9813309247 100644
--- a/include/configs/gplugd.h
+++ b/include/configs/gplugd.h
@@ -31,6 +31,16 @@
 #ifndef __CONFIG_GPLUGD_H
 #define __CONFIG_GPLUGD_H
 
+/*
+ * FIXME: fix for error caused due to recent update to mach-types.h
+ */
+#include <asm/mach-types.h>
+#ifdef MACH_TYPE_SHEEVAD
+#error "MACH_TYPE_SHEEVAD has been defined properly, please remove this."
+#else
+#define MACH_TYPE_SHEEVAD	2625
+#endif
+
 /*
  * Version number information
  */
@@ -42,7 +52,7 @@
 #define CONFIG_SHEEVA_88SV331xV5	1	/* CPU Core subversion */
 #define CONFIG_ARMADA100		1	/* SOC Family Name */
 #define CONFIG_ARMADA168		1	/* SOC Used on this Board */
-#define CONFIG_MACH_SHEEVAD			/* Machine type */
+#define CONFIG_MACH_TYPE		MACH_TYPE_SHEEVAD /* Machine type */
 #define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */
 
 #define	CONFIG_SYS_TEXT_BASE	0x00f00000
@@ -69,7 +79,6 @@
 /* Network configuration */
 #ifdef CONFIG_CMD_NET
 #define CONFIG_CMD_PING
-#define CONFIG_NET_MULTI
 #define CONFIG_ARMADA100_FEC
 
 /* DHCP Support */
@@ -77,6 +86,29 @@
 #define CONFIG_BOOTP_DHCP_REQUEST_DELAY		50000
 #endif /* CONFIG_CMD_NET */
 
+/* GPIO Support */
+#define CONFIG_MARVELL_GPIO
+
+/* PHY configuration */
+#define CONFIG_MII
+#define CONFIG_CMD_MII
+#define CONFIG_RESET_PHY_R
+/* 88E3015 register definition */
+#define PHY_LED_PAR_SEL_REG		22
+#define PHY_LED_MAN_REG			25
+#define PHY_LED_VAL			0x5b	/* LINK LED1, ACT LED2 */
+/* GPIO Configuration for PHY */
+#define CONFIG_SYS_GPIO_PHY_RST		104	/* GPIO104 */
+
+/* SPI Support */
+#define CONFIG_ARMADA100_SPI
+#define CONFIG_ENV_SPI_CS		110
+#define CONFIG_SYS_SSP_PORT		2
+
+/* Flash Support */
+#define CONFIG_CMD_SF
+#define CONFIG_SPI_FLASH_ATMEL
+
 /*
  * mv-common.h should be defined after CMD configs since it used them
  * to enable certain macros
@@ -93,7 +125,13 @@
 /*
  * Environment variables configurations
  */
-#define CONFIG_ENV_IS_NOWHERE	1	/* if env in SDRAM */
-#define CONFIG_ENV_SIZE	0x20000		/* 64k */
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_SECT_SIZE		0x4000
+#define CONFIG_ENV_SIZE			0x4000
+#define CONFIG_ENV_OFFSET		0x07C000
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_EDITENV
+#define CONFIG_CMD_SAVEENV
 
 #endif	/* __CONFIG_GPLUGD_H */