X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fimx31_litekit.h;h=a340e97f008c61cc739a544daa1e72d22d7fff35;hb=0a7bec7f991950da90c6ee6bc59f322abebccbb7;hp=5e976bc165699f8b5ace1803705706f96a629ef3;hpb=97d7ab8a8eb6dbf7c9e8096f31031dfed81db8f8;p=u-boot

diff --git a/include/configs/imx31_litekit.h b/include/configs/imx31_litekit.h
index 5e976bc165..a340e97f00 100644
--- a/include/configs/imx31_litekit.h
+++ b/include/configs/imx31_litekit.h
@@ -63,8 +63,8 @@
  * Hardware drivers
  */
 
-#define CONFIG_MXC_UART	1
-#define CONFIG_SYS_MX31_UART1		1
+#define CONFIG_MXC_UART
+#define CONFIG_MXC_UART_BASE	UART1_BASE
 #define CONFIG_MXC_GPIO
 
 #define CONFIG_HARD_SPI		1
@@ -72,19 +72,21 @@
 #define CONFIG_DEFAULT_SPI_BUS	1
 #define CONFIG_DEFAULT_SPI_MODE	(SPI_MODE_0 | SPI_CS_HIGH)
 
-#define CONFIG_FSL_PMIC
+/* PMIC Controller */
+#define CONFIG_PMIC
+#define CONFIG_PMIC_SPI
+#define CONFIG_PMIC_FSL
 #define CONFIG_FSL_PMIC_BUS	1
 #define CONFIG_FSL_PMIC_CS	0
 #define CONFIG_FSL_PMIC_CLK	1000000
 #define CONFIG_FSL_PMIC_MODE	(SPI_MODE_0 | SPI_CS_HIGH)
-
-#define CONFIG_RTC_MC13783	1
+#define CONFIG_FSL_PMIC_BITLEN	32
+#define CONFIG_RTC_MC13XXX
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_CONS_INDEX	1
 #define CONFIG_BAUDRATE		115200
-#define CONFIG_SYS_BAUDRATE_TABLE	{9600, 19200, 38400, 57600, 115200}
 
 /***********************************************************
  * Command definition
@@ -112,7 +114,6 @@
 	"prg_uboot=tftpboot 0x80000000 u-boot-imx31_litekit.bin; protect off all; erase 0xa00d0000 0xa01effff; cp.b 0x80000000 0xa00d0000 $(filesize)\0"
 
 
-#define CONFIG_NET_MULTI
 #define CONFIG_SMC911X		1
 #define CONFIG_SMC911X_BASE	(CS4_BASE + 0x00020000)
 #define CONFIG_SMC911X_32_BIT	1