X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Finnokom.h;h=ed03ad32a0734829ff8b5343269ab9e66be5f5a8;hb=8449f287f5c53d59db13c3c512e6bd1750b692d1;hp=1b05b8058a51e9f3031961c0a669f6c4daad1944;hpb=f61f1e150c84f5b9347fca79a4bc5f2286c545d2;p=u-boot

diff --git a/include/configs/innokom.h b/include/configs/innokom.h
index 1b05b8058a..ed03ad32a0 100644
--- a/include/configs/innokom.h
+++ b/include/configs/innokom.h
@@ -39,6 +39,10 @@
 
 #undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff      */
 					/* for timer/console/ethernet       */
+
+/* we will never enable dcache, because we have to setup MMU first */
+#define CONFIG_SYS_NO_DCACHE
+
 /*
  * Hardware drivers
  */
@@ -46,6 +50,7 @@
 /*
  * select serial console configuration
  */
+#define CONFIG_PXA_SERIAL
 #define CONFIG_FFUART		1	/* we use FFUART on CSB226 */
 
 /* allow to overwrite serial and ethaddr */
@@ -73,7 +78,7 @@
 #define CONFIG_CMD_CACHE
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_ECHO
-#define CONFIG_CMD_ENV
+#define CONFIG_CMD_SAVEENV
 #define CONFIG_CMD_FLASH
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_IMI
@@ -115,11 +120,9 @@
 #define CONFIG_SYS_MEMTEST_START	0xa0400000      /* memtest works on     */
 #define CONFIG_SYS_MEMTEST_END         0xa0800000      /* 4 ... 8 MB in DRAM   */
 
-#undef  CONFIG_SYS_CLKS_IN_HZ          /* everything, incl board info, in Hz */
-
 #define CONFIG_SYS_LOAD_ADDR           0xa3000000      /* load kernel to this address   */
 
-#define CONFIG_SYS_HZ                  3686400         /* incrementer freq: 3.6864 MHz */
+#define CONFIG_SYS_HZ			1000
 						/* RS: the oscillator is actually 3680130?? */
 
 #define CONFIG_SYS_CPUSPEED            0x141           /* set core clock to 200/200/100 MHz */
@@ -203,7 +206,7 @@
 */
 
 /* No command line, one static partition, whole device */
-#undef CONFIG_JFFS2_CMDLINE
+#undef CONFIG_CMD_MTDPARTS
 #define CONFIG_JFFS2_DEV		"nor0"
 #define CONFIG_JFFS2_PART_SIZE		0xFFFFFFFF
 #define CONFIG_JFFS2_PART_OFFSET	0x00000000
@@ -211,7 +214,7 @@
 /* mtdparts command line support */
 /* Note: fake mtd_id used, no linux mtd map file */
 /*
-#define CONFIG_JFFS2_CMDLINE
+#define CONFIG_CMD_MTDPARTS
 #define MTDIDS_DEFAULT		"nor0=innokom-0"
 */