X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fipek01.h;h=126e02e40fac9067f53a8f4af3689e68f686db5f;hb=8ed31f369a73d926afa3fdd6a63b71a9c0b487dc;hp=d3821389fd5025f64cc12a42436216f7d5aabc31;hpb=25ddd1fb0a2281b182529afbc8fda5de2dc16d96;p=u-boot

diff --git a/include/configs/ipek01.h b/include/configs/ipek01.h
index d3821389fd..126e02e40f 100644
--- a/include/configs/ipek01.h
+++ b/include/configs/ipek01.h
@@ -5,23 +5,7 @@
  * (C) Copyright 2009
  * Wolfgang Grandegger, DENX Software Engineering, wg@denx.de.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -32,10 +16,10 @@
  */
 
 #define CONFIG_MPC5200
-#define CONFIG_MPC5xxx		1	/* This is an MPC5xxx CPU */
-#define CONFIG_MPX5200		1	/* ... on MPX5200 board */
-#define CONFIG_MPC5200_DDR	1	/* ... use DDR RAM */
+#define CONFIG_MPX5200		1	/* MPX5200 board */
+#define CONFIG_MPC5200_DDR	1	/* use DDR RAM */
 #define CONFIG_IPEK01           	/* Motherboard is ipek01 */
+#define CONFIG_DISPLAY_BOARDINFO
 
 #define	CONFIG_SYS_TEXT_BASE	0xfc000000
 
@@ -98,7 +82,6 @@
 #define CONFIG_PCI_IO_PHYS	CONFIG_PCI_IO_BUS
 #define CONFIG_PCI_IO_SIZE	0x01000000
 
-#define CONFIG_NET_MULTI	1
 #define CONFIG_MII		1
 #define CONFIG_EEPRO100		1
 #define CONFIG_SYS_RX_ETH_BUFFER	8  /* use 8 rx buffer on eepro100  */
@@ -109,7 +92,6 @@
 /* USB */
 #define CONFIG_USB_OHCI_NEW
 #define CONFIG_SYS_OHCI_BE_CONTROLLER
-#define CONFIG_USB_STORAGE
 
 #define CONFIG_SYS_USB_OHCI_CPU_INIT
 #define CONFIG_SYS_USB_OHCI_REGS_BASE		MPC5XXX_USB
@@ -119,27 +101,19 @@
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
 #ifdef CONFIG_VIDEO
 #define CONFIG_CMD_BMP		/* BMP support */
 #endif
 #define CONFIG_CMD_DATE		/* support for RTC, date/time...*/
-#define CONFIG_CMD_DHCP		/* DHCP Support */
-#define CONFIG_CMD_FAT		/* FAT support */
-#define CONFIG_CMD_I2C		/* I2C serial bus support */
 #define CONFIG_CMD_IDE		/* IDE harddisk support */
 #define CONFIG_CMD_IRQ		/* irqinfo */
-#define CONFIG_CMD_MII		/* MII support */
 #define CONFIG_CMD_PCI		/* pciinfo */
-#define CONFIG_CMD_USB		/* USB Support */
 
 #define CONFIG_SYS_LOWBOOT	1
 
 /*
  * Autobooting
  */
-#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds */
 
 #define CONFIG_PREBOOT	"echo;"	\
 	"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
@@ -189,9 +163,6 @@
 /*
  * Open firmware flat tree support
  */
-#define CONFIG_OF_LIBFDT	1
-#define CONFIG_OF_BOARD_SETUP	1
-
 #define OF_CPU			"PowerPC,5200@0"
 #define OF_SOC			"soc5200@f0000000"
 #define OF_TBCLK		(bd->bi_busfreq / 4)
@@ -266,8 +237,6 @@
 /* End of used area in DPRAM */
 #define CONFIG_SYS_INIT_RAM_SIZE		MPC5XXX_SRAM_SIZE
 
-/* size in bytes reserved for initial data */
-
 #define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - \
 					 GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
@@ -297,7 +266,6 @@
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP			/* undef to save memory	*/
-#define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt */
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size */
 #else
@@ -316,9 +284,6 @@
 
 #define CONFIG_SYS_LOAD_ADDR		0x100000 /* default load address */
 
-#define CONFIG_SYS_HZ			1000 /* decrementer freq: 1 ms ticks */
-#define CONFIG_LOOPW
-
 /*
  * Various low-level settings
  */