X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fipek01.h;h=50fd995657364b052e24bd5fb50f419040b6321f;hb=1a4596601fd395f3afb8f82f3f840c5e00bdd57a;hp=d0cb1e1d6033d5acfb0ebbc6a8b47a038f7a684b;hpb=93910edb595a88d394da3eb2cf5148096155dfe9;p=u-boot

diff --git a/include/configs/ipek01.h b/include/configs/ipek01.h
index d0cb1e1d60..50fd995657 100644
--- a/include/configs/ipek01.h
+++ b/include/configs/ipek01.h
@@ -5,23 +5,7 @@
  * (C) Copyright 2009
  * Wolfgang Grandegger, DENX Software Engineering, wg@denx.de.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:	GPL-2.0+ 
  */
 
 #ifndef __CONFIG_H
@@ -37,13 +21,12 @@
 #define CONFIG_MPC5200_DDR	1	/* ... use DDR RAM */
 #define CONFIG_IPEK01           	/* Motherboard is ipek01 */
 
+#define	CONFIG_SYS_TEXT_BASE	0xfc000000
+
 #define CONFIG_SYS_MPC5XXX_CLKIN	33000000 /* ... running at 33MHz */
 
 #define CONFIG_MISC_INIT_R
 
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH  */
-#define BOOTFLAG_WARM		0x02	/* Software reboot */
-
 #define CONFIG_SYS_CACHELINE_SIZE	32 /* For MPC5xxx CPUs */
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_SYS_CACHELINE_SHIFT	5  /* log base 2 of the above value */
@@ -99,7 +82,6 @@
 #define CONFIG_PCI_IO_PHYS	CONFIG_PCI_IO_BUS
 #define CONFIG_PCI_IO_SIZE	0x01000000
 
-#define CONFIG_NET_MULTI	1
 #define CONFIG_MII		1
 #define CONFIG_EEPRO100		1
 #define CONFIG_SYS_RX_ETH_BUFFER	8  /* use 8 rx buffer on eepro100  */
@@ -265,16 +247,13 @@
 /* Use SRAM until RAM will be available */
 #define CONFIG_SYS_INIT_RAM_ADDR	MPC5XXX_SRAM
 /* End of used area in DPRAM */
-#define CONFIG_SYS_INIT_RAM_END		MPC5XXX_SRAM_SIZE
-
-/* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_SIZE	128
+#define CONFIG_SYS_INIT_RAM_SIZE		MPC5XXX_SRAM_SIZE
 
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - \
-					 CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - \
+					 GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CONFIG_SYS_MONITOR_BASE		TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_TEXT_BASE
 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 #   define CONFIG_SYS_RAMBOOT		1
 #endif
@@ -324,13 +303,8 @@
 /*
  * Various low-level settings
  */
-#if defined(CONFIG_MPC5200)
 #define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
 #define CONFIG_SYS_HID0_FINAL		HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT		0
-#define CONFIG_SYS_HID0_FINAL		0
-#endif
 
 #define CONFIG_SYS_BOOTCS_START		CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE