X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fkatmai.h;h=3143b631ce96c7b9c10eaeeea8d5389e369d739c;hb=7f0ef5a945a0a9cef773c2b05b157d2fef3ea7ad;hp=3ed8dc7f3ea2a8ce251006ef500b10db9497ef27;hpb=d963e84c92a63b4e6c4f2f80482a5ecbe9b24fe0;p=u-boot

diff --git a/include/configs/katmai.h b/include/configs/katmai.h
index 3ed8dc7f3e..3143b631ce 100644
--- a/include/configs/katmai.h
+++ b/include/configs/katmai.h
@@ -4,23 +4,7 @@
  *
  * (C) Copyright 2004 Paul Reynolds <PaulReynolds@lhsolutions.com>
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:	GPL-2.0+
  */
 
 /************************************************************************
@@ -34,7 +18,6 @@
  * High Level Configuration Options
  *----------------------------------------------------------------------*/
 #define CONFIG_KATMAI			1	/* Board is Katmai	*/
-#define CONFIG_4xx			1	/* ... PPC4xx family	*/
 #define CONFIG_440			1	/* ... PPC440 family	*/
 #define CONFIG_440SPE			1	/* Specifc SPe support	*/
 #define CONFIG_440SPE_REVA		1	/* Support old Rev A.	*/
@@ -46,7 +29,6 @@
 /*
  * Enable this board for more than 2GB of SDRAM
  */
-#define CONFIG_PHYS_64BIT
 #define	CONFIG_VERY_BIG_RAM
 
 /*
@@ -55,7 +37,6 @@
 #define CONFIG_HOSTNAME		katmai
 #include "amcc-common.h"
 
-#define CONFIG_BOARD_EARLY_INIT_F 1	/* Call board_pre_init		*/
 #undef  CONFIG_SHOW_BOOT_PROGRESS
 
 /*-----------------------------------------------------------------------
@@ -119,15 +100,13 @@
 /*-----------------------------------------------------------------------
  * I2C
  *----------------------------------------------------------------------*/
-#define CONFIG_SYS_I2C_SPEED		100000	/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		100000
 
-#define CONFIG_I2C_MULTI_BUS
 #define CONFIG_SYS_SPD_BUS_NUM		0	/* The I2C bus for SPD		*/
 
 #define IIC0_BOOTPROM_ADDR	0x50
 #define IIC0_ALT_BOOTPROM_ADDR	0x54
 
-#define CONFIG_SYS_I2C_MULTI_EEPROMS
 #define CONFIG_SYS_I2C_EEPROM_ADDR	(0x50)
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
@@ -191,14 +170,9 @@
 /*
  * Commands additional to the ones defined in amcc-common.h
  */
-#define CONFIG_CMD_CHIP_CONFIG
-#define CONFIG_CMD_DATE
 #define CONFIG_CMD_ECCTEST
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
 #define CONFIG_CMD_PCI
 #define CONFIG_CMD_SDRAM
-#define CONFIG_CMD_SNTP
 
 #define	CONFIG_IBM_EMAC4_V4	1	/* 440SPe has this EMAC version	*/
 #define CONFIG_PHY_ADDR		1	/* PHY address, See schematics	*/
@@ -237,8 +211,7 @@
  *-----------------------------------------------------------------------
  */
 /* General PCI */
-#define CONFIG_PCI			/* include pci support		*/
-#define CONFIG_PCI_PNP		1	/* do pci plug-and-play		*/
+#define CONFIG_PCI_INDIRECT_BRIDGE	/* indirect PCI bridge support */
 #define CONFIG_PCI_SCAN_SHOW	1	/* show pci devices on startup	*/
 #define CONFIG_PCI_CONFIG_HOST_BRIDGE
 
@@ -262,7 +235,6 @@
 #define CONFIG_SYSTEMACE	1	/* Enable SystemACE support	*/
 #define CONFIG_SYS_SYSTEMACE_WIDTH	16	/* Data bus width is 16		*/
 #define CONFIG_SYS_SYSTEMACE_BASE	CONFIG_SYS_ACE_BASE
-#define CONFIG_DOS_PARTITION	1
 
 /*-----------------------------------------------------------------------
  * External Bus Controller (EBC) Setup