X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fkatmai.h;h=3ed8dc7f3ea2a8ce251006ef500b10db9497ef27;hb=7b89795f17c990263a17ecf25e447df16e379748;hp=ea6cf0d23fc1b30273b16bf9bd7e127a631b2003;hpb=1a6a00dcc5bdfc6e9b4b00f39c1f583a7f96fc7f;p=u-boot

diff --git a/include/configs/katmai.h b/include/configs/katmai.h
index ea6cf0d23f..3ed8dc7f3e 100644
--- a/include/configs/katmai.h
+++ b/include/configs/katmai.h
@@ -37,15 +37,17 @@
 #define CONFIG_4xx			1	/* ... PPC4xx family	*/
 #define CONFIG_440			1	/* ... PPC440 family	*/
 #define CONFIG_440SPE			1	/* Specifc SPe support	*/
+#define CONFIG_440SPE_REVA		1	/* Support old Rev A.	*/
 #define CONFIG_SYS_CLK_FREQ	33333333	/* external freq to pll	*/
 #define CONFIG_SYS_4xx_RESET_TYPE	0x2	/* use chip reset on this board	*/
 
+#define	CONFIG_SYS_TEXT_BASE	0xFFFA0000
+
 /*
  * Enable this board for more than 2GB of SDRAM
  */
 #define CONFIG_PHYS_64BIT
 #define	CONFIG_VERY_BIG_RAM
-#define CONFIG_MAX_MEM_MAPPED	((phys_size_t)2 << 30)
 
 /*
  * Include common defines/options for all AMCC eval boards
@@ -53,13 +55,6 @@
 #define CONFIG_HOSTNAME		katmai
 #include "amcc-common.h"
 
-/*
- * For booting 256K-paged Linux we should have 16MB of memory
- * for Linux initial memory map
- */
-#undef CONFIG_SYS_BOOTMAPSZ
-#define CONFIG_SYS_BOOTMAPSZ	(16 << 20)
-
 #define CONFIG_BOARD_EARLY_INIT_F 1	/* Call board_pre_init		*/
 #undef  CONFIG_SHOW_BOOT_PROGRESS
 
@@ -68,7 +63,6 @@
  * actual resources get mapped (not physical addresses)
  *----------------------------------------------------------------------*/
 #define CONFIG_SYS_FLASH_BASE		0xff000000	/* start of FLASH	*/
-#define CONFIG_SYS_PERIPHERAL_BASE	0xa0000000	/* internal peripherals	*/
 #define CONFIG_SYS_ISRAM_BASE		0x90000000	/* internal SRAM	*/
 
 #define CONFIG_SYS_PCI_MEMBASE		0x80000000	/* mapped PCI memory	*/
@@ -102,17 +96,15 @@
 #define CONFIG_SYS_TEMP_STACK_OCM	1
 #define CONFIG_SYS_OCM_DATA_ADDR	CONFIG_SYS_ISRAM_BASE
 #define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_ISRAM_BASE	/* Initial RAM address	*/
-#define CONFIG_SYS_INIT_RAM_END	0x2000		/* End of used area in RAM */
-#define CONFIG_SYS_GBL_DATA_SIZE	128		/* num bytes initial data */
+#define CONFIG_SYS_INIT_RAM_SIZE	0x2000		/* Size of used area in RAM */
 
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
-#define CONFIG_SYS_POST_WORD_ADDR	(CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_POST_WORD_ADDR
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	(CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
 
 /*-----------------------------------------------------------------------
  * Serial Port
  *----------------------------------------------------------------------*/
-#undef CONFIG_UART1_CONSOLE
+#define CONFIG_CONS_INDEX	1	/* Use UART0			*/
 #undef CONFIG_SYS_EXT_SERIAL_CLOCK
 
 /*-----------------------------------------------------------------------
@@ -130,7 +122,6 @@
 #define CONFIG_SYS_I2C_SPEED		100000	/* I2C speed and slave address	*/
 
 #define CONFIG_I2C_MULTI_BUS
-#define CONFIG_I2C_CMD_TREE
 #define CONFIG_SYS_SPD_BUS_NUM		0	/* The I2C bus for SPD		*/
 
 #define IIC0_BOOTPROM_ADDR	0x50
@@ -142,6 +133,11 @@
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
 
+/* I2C bootstrap EEPROM */
+#define CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR	0x50
+#define CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET	0
+#define CONFIG_4xx_CONFIG_BLOCKSIZE		8
+
 /* I2C RTC */
 #define CONFIG_RTC_M41T11	1
 #define CONFIG_SYS_RTC_BUS_NUM		1	/* The I2C bus for RTC		*/
@@ -184,11 +180,10 @@
 #define	CONFIG_EXTRA_ENV_SETTINGS					\
 	CONFIG_AMCC_DEF_ENV						\
 	CONFIG_AMCC_DEF_ENV_POWERPC					\
-	CONFIG_AMCC_DEF_ENV_PPC_OLD					\
 	CONFIG_AMCC_DEF_ENV_NOR_UPD					\
-	"kernel_addr=fff10000\0"					\
-	"ramdisk_addr=fff20000\0"					\
-	"kozio=bootm ffc60000\0"					\
+	"kernel_addr=ff000000\0"					\
+	"fdt_addr=ff1e0000\0"						\
+	"ramdisk_addr=ff200000\0"					\
 	"pciconfighost=1\0"						\
 	"pcie_mode=RP:RP:RP\0"						\
 	""
@@ -196,8 +191,11 @@
 /*
  * Commands additional to the ones defined in amcc-common.h
  */
-#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_CHIP_CONFIG
 #define CONFIG_CMD_DATE
+#define CONFIG_CMD_ECCTEST
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
 #define CONFIG_CMD_PCI
 #define CONFIG_CMD_SDRAM
 #define CONFIG_CMD_SNTP