X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Flart.h;h=2d3b369aae68078c8c7fa53a03e53ee88a4b5a7d;hb=178e26d75212f5aba63116585ef8f67ca6854e85;hp=c98f3777ca2f704c8fe8103361474f760c29be21;hpb=a8c7c708a9e0051c6358718c53572a4681eaa22b;p=u-boot diff --git a/include/configs/lart.h b/include/configs/lart.h index c98f3777ca..2d3b369aae 100644 --- a/include/configs/lart.h +++ b/include/configs/lart.h @@ -27,12 +27,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -/* - * If we are developing, we might want to start armboot from ram - * so we MUST NOT initialize critical regs like mem-timing ... - */ -#define CONFIG_INIT_CRITICAL /* undef for developing */ - /* * High Level Configuration Options * (easy to change) @@ -41,23 +35,27 @@ #define CONFIG_LART 1 /* on an LART Board */ #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ +/* we will never enable dcache, because we have to setup MMU first */ +#define CONFIG_SYS_NO_DCACHE /* * Size of malloc() pool */ -#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) -#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ /* * Hardware drivers */ -#define CONFIG_DRIVER_CS8900 1 /* we have a CS8900 on-board */ -#define CS8900_BASE 0x20008300 -#define CS8900_BUS16 1 +#define CONFIG_NET_MULTI +#define CONFIG_CS8900 /* we have a CS8900 on-board */ +#define CONFIG_CS8900_BASE 0x20008300 +#define CONFIG_CS8900_BUS16 /* * select serial console configuration */ +#define CONFIG_SA1100_SERIAL #define CONFIG_SERIAL3 1 /* we use SERIAL 3 on LART */ /* allow to overwrite serial and ethaddr */ @@ -65,13 +63,24 @@ #define CONFIG_BAUDRATE 9600 -#define CONFIG_COMMANDS (CONFIG_CMD_DFL) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include + #define CONFIG_BOOTDELAY 3 -#define CONFIG_BOOTARGS "root=ramfs devfs=mount console=ttySA0,9600" +#define CONFIG_BOOTARGS "root=ramfs devfs=mount console=ttySA0,9600" #define CONFIG_ETHADDR 08:00:3e:26:0a:5b #define CONFIG_NETMASK 255.255.0.0 #define CONFIG_IPADDR 172.22.2.131 @@ -79,7 +88,7 @@ #define CONFIG_BOOTFILE "elinos-lart" #define CONFIG_BOOTCOMMAND "tftp; bootm" -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif @@ -87,25 +96,23 @@ /* * Miscellaneous configurable options */ -#define CFG_LONGHELP /* undef to save memory */ -#define CFG_PROMPT "LART # " /* Monitor Command Prompt */ -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ - -#define CFG_MEMTEST_START 0xc0400000 /* memtest works on */ -#define CFG_MEMTEST_END 0xc0800000 /* 4 ... 8 MB in DRAM */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "LART # " /* Monitor Command Prompt */ +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ +#define CONFIG_SYS_MEMTEST_START 0xc0400000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0xc0800000 /* 4 ... 8 MB in DRAM */ -#define CFG_LOAD_ADDR 0xc8000000 /* default load address */ +#define CONFIG_SYS_LOAD_ADDR 0xc8000000 /* default load address */ -#define CFG_HZ 3686400 /* incrementer freq: 3.6864 MHz */ -#define CFG_CPUSPEED 0x0b /* set core clock to 220 MHz */ +#define CONFIG_SYS_HZ 3686400 /* incrementer freq: 3.6864 MHz */ +#define CONFIG_SYS_CPUSPEED 0x0b /* set core clock to 220 MHz */ /* valid baudrates */ -#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /*----------------------------------------------------------------------- * Stack sizes @@ -135,20 +142,20 @@ #define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ #define PHYS_FLASH_SIZE 0x00400000 /* 4 MB */ -#define CFG_FLASH_BASE PHYS_FLASH_1 +#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 /*----------------------------------------------------------------------- * FLASH and environment organization */ -#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CFG_MAX_FLASH_SECT (31+8) /* max number of sectors on one chip */ +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CONFIG_SYS_MAX_FLASH_SECT (31+8) /* max number of sectors on one chip */ /* timeout values are in ticks */ -#define CFG_FLASH_ERASE_TOUT (2*CFG_HZ) /* Timeout for Flash Erase */ -#define CFG_FLASH_WRITE_TOUT (2*CFG_HZ) /* Timeout for Flash Write */ +#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ +#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */ -#define CFG_ENV_IS_IN_FLASH 1 -#define CFG_ENV_ADDR (PHYS_FLASH_1 + 0x1C000) /* Addr of Environment Sector */ -#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ +#define CONFIG_ENV_IS_IN_FLASH 1 +#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x1C000) /* Addr of Environment Sector */ +#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ #endif /* __CONFIG_H */