X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Flinkstation.h;h=eec79619c10a2ba2ee68711974995e8652fa9900;hb=b7e3129e550957f046c29a917c63f4b503fbfcb9;hp=16b464cf6dac5ae7f5fcbea02edea78f0984e051;hpb=1c19863fa2ab1fe340cdd7924c84a34f308de6e1;p=u-boot diff --git a/include/configs/linkstation.h b/include/configs/linkstation.h index 16b464cf6d..eec79619c1 100644 --- a/include/configs/linkstation.h +++ b/include/configs/linkstation.h @@ -20,6 +20,22 @@ #ifndef __CONFIG_H #define __CONFIG_H +/* + * Valid values for CONFIG_SYS_TEXT_BASE are: + * + * Standard configuration - all models + * 0xFFF00000 boot from flash + * + * Test configuration (boot from RAM using uloader.o) + * LinkStation HD-HLAN and KuroBox Standard + * 0x03F00000 boot from RAM + * LinkStation HD-HGLAN and KuroBox HG + * 0x07F00000 boot from RAM + */ +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xFFF00000 +#endif + #if 0 #define DEBUG #endif @@ -119,9 +135,6 @@ #define CONFIG_SYS_CONSOLE_IS_IN_ENV -#define XMK_STR(x) #x -#define MK_STR(x) XMK_STR(x) - #if defined(CONFIG_HLAN) || defined(CONFIG_LAN) #define UBFILE "share/u-boot/u-boot-hd.flash.bin" #elif defined(CONFIG_HGLAN) @@ -137,10 +150,10 @@ "stdin=nc\0" \ "stdout=nc\0" \ "stderr=nc\0" \ - "ipaddr="MK_STR(CONFIG_IPADDR_LS)"\0" \ + "ipaddr="__stringify(CONFIG_IPADDR_LS)"\0" \ "netmask=255.255.255.0\0" \ - "serverip="MK_STR(CONFIG_SERVERIP_LS)"\0" \ - "ncip="MK_STR(CONFIG_NCIP_LS)"\0" \ + "serverip="__stringify(CONFIG_SERVERIP_LS)"\0" \ + "ncip="__stringify(CONFIG_NCIP_LS)"\0" \ "netretry=no\0" \ "nc=setenv stdin nc;setenv stdout nc;setenv stderr nc\0" \ "ser=setenv stdin serial;setenv stdout serial;setenv stderr serial\0" \ @@ -195,7 +208,6 @@ /*----------------------------------------------------------------------- * Ethernet stuff */ -#define CONFIG_NET_MULTI #if defined(CONFIG_LAN) || defined(CONFIG_HLAN) #define CONFIG_TULIP @@ -217,7 +229,7 @@ #define CONFIG_SYS_FLASH_BASE 0xFFC00000 #define CONFIG_SYS_FLASH_SIZE 0x00400000 -#define CONFIG_SYS_MONITOR_BASE TEXT_BASE +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_RESET_ADDRESS 0xFFF00100 #define CONFIG_SYS_EUMB_ADDR 0x80000000 @@ -240,7 +252,7 @@ #endif /*----------------------------------------------------------------------- - * Change TEXT_BASE in bord/linkstation/config.mk to get a RAM build + * Change CONFIG_SYS_TEXT_BASE in bord/linkstation/config.mk to get a RAM build * * RAM based builds are for testing purposes. A Linux module, uloader.o, * exists to load U-Boot and pass control to it @@ -259,16 +271,14 @@ #else #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 #endif -#define CONFIG_SYS_INIT_RAM_END 0x1000 -#define CONFIG_SYS_GBL_DATA_SIZE 128 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) /*---------------------------------------------------------------------- * Serial configuration */ #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 57600 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL @@ -290,7 +300,7 @@ * taken from the orignal Linkstation boot code * * Most of the low level configuration setttings are normally used - * in cpu/mpc824x/cpu_init.c which is NOT used by this implementation. + * in arch/powerpc/cpu/mpc824x/cpu_init.c which is NOT used by this implementation. * Low level initialisation is done in board/linkstation/early_init.S * The values below are included for reference purpose only */ @@ -495,12 +505,4 @@ */ #define CONFIG_DOS_PARTITION -/*----------------------------------------------------------------------- - * Internal Definitions - * - * Boot Flags - */ -#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02 /* Software reboot */ - #endif /* __CONFIG_H */