X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fls1021aqds.h;h=e8b1ecaeb19c6da7b85f51423a8b5ebe824058f6;hb=0a34a5fd2794a87c43e8d009ccb711e6839843b2;hp=8a5a707d3b140927efbc30e41ccac8daf360fbf1;hpb=891b487098ee2169a16b1bbb354aaef28aa90630;p=u-boot

diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h
index 8a5a707d3b..e8b1ecaeb1 100644
--- a/include/configs/ls1021aqds.h
+++ b/include/configs/ls1021aqds.h
@@ -9,7 +9,9 @@
 
 #define CONFIG_LS102XA
 
-#define CONFIG_SYS_GENERIC_BOARD
+#define CONFIG_ARMV7_PSCI
+
+#define CONFIG_SYS_FSL_CLK
 
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO
@@ -67,7 +69,7 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT
 #define CONFIG_SPL_MMC_SUPPORT
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR		0xe8
-#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS		0x400
+#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS		0x600
 
 #define CONFIG_SPL_TEXT_BASE		0x10000000
 #define CONFIG_SPL_MAX_SIZE		0x1a000
@@ -80,7 +82,7 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000
 #define CONFIG_SPL_BSS_START_ADDR	0x80100000
 #define CONFIG_SPL_BSS_MAX_SIZE		0x80000
-#define CONFIG_SYS_MONITOR_LEN		0x80000
+#define CONFIG_SYS_MONITOR_LEN		0xc0000
 #endif
 
 #ifdef CONFIG_QSPI_BOOT
@@ -369,11 +371,9 @@ unsigned long get_board_ddr_clk(void);
  * Serial Port
  */
 #ifdef CONFIG_LPUART
-#define CONFIG_FSL_LPUART
 #define CONFIG_LPUART_32B_REG
 #else
 #define CONFIG_CONS_INDEX		1
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	1
 #define CONFIG_SYS_NS16550_CLK		get_serial_clock()
@@ -387,6 +387,8 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_CMD_I2C
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
+#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
 #define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
 
 /*
@@ -410,14 +412,11 @@ unsigned long get_board_ddr_clk(void);
 /* SPI */
 #ifdef CONFIG_QSPI_BOOT
 /* QSPI */
-#define CONFIG_FSL_QSPI
 #define QSPI0_AMBA_BASE			0x40000000
 #define FSL_QSPI_FLASH_SIZE		(1 << 24)
 #define FSL_QSPI_FLASH_NUM		2
-#define CONFIG_SPI_FLASH_SPANSION
 
 /* DSPI */
-#define CONFIG_FSL_DSPI
 
 /* DM SPI */
 #if defined(CONFIG_FSL_DSPI) || defined(CONFIG_FSL_QSPI)
@@ -430,19 +429,31 @@ unsigned long get_board_ddr_clk(void);
 /*
  * USB
  */
-#define CONFIG_HAS_FSL_DR_USB
+/* EHCI Support - disbaled by default */
+/*#define CONFIG_HAS_FSL_DR_USB*/
 
 #ifdef CONFIG_HAS_FSL_DR_USB
 #define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_FSL
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
+#endif
+
+/*XHCI Support - enabled by default*/
+#define CONFIG_HAS_FSL_XHCI_USB
 
-#ifdef CONFIG_USB_EHCI
+#ifdef CONFIG_HAS_FSL_XHCI_USB
+#define CONFIG_USB_XHCI_FSL
+#define CONFIG_USB_XHCI_DWC3
+#define CONFIG_USB_XHCI
+#define CONFIG_USB_MAX_CONTROLLER_COUNT		1
+#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS	2
+#endif
+
+#if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_XHCI_USB)
 #define CONFIG_CMD_USB
 #define CONFIG_USB_STORAGE
-#define CONFIG_USB_EHCI_FSL
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_CMD_EXT2
 #endif
-#endif
 
 /*
  * Video
@@ -533,7 +544,6 @@ unsigned long get_board_ddr_clk(void);
 
 #ifdef CONFIG_PCI
 #define CONFIG_PCI_PNP
-#define CONFIG_E1000
 #define CONFIG_PCI_SCAN_SHOW
 #define CONFIG_CMD_PCI
 #endif
@@ -548,29 +558,30 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_ARMV7_NONSEC
 #define CONFIG_ARMV7_VIRT
 #define CONFIG_PEN_ADDR_BIG_ENDIAN
-#define CONFIG_LS102XA_NS_ACCESS
+#define CONFIG_LAYERSCAPE_NS_ACCESS
 #define CONFIG_SMP_PEN_ADDR		0x01ee0200
 #define CONFIG_TIMER_CLK_FREQ		12500000
-#define CONFIG_ARMV7_SECURE_BASE	OCRAM_BASE_S_ADDR
 
 #define CONFIG_HWCONFIG
-#define HWCONFIG_BUFFER_SIZE		128
+#define HWCONFIG_BUFFER_SIZE		256
+
+#define CONFIG_FSL_DEVICE_DISABLE
 
 #define CONFIG_BOOTDELAY		3
 
-#define CONFIG_SYS_QE_FW_ADDR     0x67f40000
+#define CONFIG_SYS_QE_FW_ADDR     0x600c0000
 
 #ifdef CONFIG_LPUART
 #define CONFIG_EXTRA_ENV_SETTINGS       \
 	"bootargs=root=/dev/ram0 rw console=ttyLP0,115200\0" \
-	"fdt_high=0xcfffffff\0"         \
-	"initrd_high=0xcfffffff\0"      \
+	"fdt_high=0xffffffff\0"         \
+	"initrd_high=0xffffffff\0"      \
 	"hwconfig=fsl_ddr:ctlr_intlv=null,bank_intlv=null\0"
 #else
 #define CONFIG_EXTRA_ENV_SETTINGS	\
 	"bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \
-	"fdt_high=0xcfffffff\0"		\
-	"initrd_high=0xcfffffff\0"      \
+	"fdt_high=0xffffffff\0"		\
+	"initrd_high=0xffffffff\0"      \
 	"hwconfig=fsl_ddr:ctlr_intlv=null,bank_intlv=null\0"
 #endif
 
@@ -642,6 +653,7 @@ unsigned long get_board_ddr_clk(void);
 
 #define CONFIG_OF_LIBFDT
 #define CONFIG_OF_BOARD_SETUP
+#define CONFIG_OF_STDOUT_VIA_ALIAS
 #define CONFIG_CMD_BOOTZ
 
 #define CONFIG_MISC_INIT_R