X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fls1043aqds.h;h=ee8cb2336cfef34d985766d397bbdf567f9ca421;hb=2ae9fbe00f71b8e48a04a13a71a9f6b42b70f158;hp=4ab8e13ba1a90154661668dda90bd349c8c5a9fa;hpb=b0f20caf6570fbc4d19c41dcedf9679784042860;p=u-boot

diff --git a/include/configs/ls1043aqds.h b/include/configs/ls1043aqds.h
index 4ab8e13ba1..ee8cb2336c 100644
--- a/include/configs/ls1043aqds.h
+++ b/include/configs/ls1043aqds.h
@@ -10,11 +10,7 @@
 #include "ls1043a_common.h"
 
 #define CONFIG_DISPLAY_CPUINFO
-#ifdef CONFIG_QSPI_BOOT
-#define CONFIG_DISPLAY_BOARDINFO_LATE
-#else
 #define CONFIG_DISPLAY_BOARDINFO
-#endif
 
 #if defined(CONFIG_NAND_BOOT) || defined(CONFIG_SD_BOOT)
 #define CONFIG_SYS_TEXT_BASE		0x82000000
@@ -29,8 +25,8 @@ unsigned long get_board_sys_clk(void);
 unsigned long get_board_ddr_clk(void);
 #endif
 
-#define CONFIG_SYS_CLK_FREQ		100000000
-#define CONFIG_DDR_CLK_FREQ		100000000
+#define CONFIG_SYS_CLK_FREQ		get_board_sys_clk()
+#define CONFIG_DDR_CLK_FREQ		get_board_ddr_clk()
 
 #define CONFIG_SKIP_LOWLEVEL_INIT
 
@@ -108,12 +104,19 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_LIBATA
 #define CONFIG_SCSI_AHCI
 #define CONFIG_SCSI_AHCI_PLAT
-#define CONFIG_CMD_SCSI
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_EXT2
+#define CONFIG_SCSI
 #define CONFIG_DOS_PARTITION
 #define CONFIG_BOARD_LATE_INIT
 
+/* EEPROM */
+#define CONFIG_ID_EEPROM
+#define CONFIG_SYS_I2C_EEPROM_NXID
+#define CONFIG_SYS_EEPROM_BUS_NUM		0
+#define CONFIG_SYS_I2C_EEPROM_ADDR		0x57
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	5
+
 #define CONFIG_SYS_SATA				AHCI_BASE_ADDR
 
 #define CONFIG_SYS_SCSI_MAX_SCSI_ID		1
@@ -152,7 +155,7 @@ unsigned long get_board_ddr_clk(void);
 					FTIM2_NOR_TWP(0x1c))
 #define CONFIG_SYS_NOR_FTIM3		0
 
-#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* number of banks */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* number of banks */
 #define CONFIG_SYS_MAX_FLASH_SECT	1024	/* sectors per device */
 #define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
 #define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
@@ -218,8 +221,8 @@ unsigned long get_board_ddr_clk(void);
 
 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 #define CONFIG_QIXIS_I2C_ACCESS
+#define CONFIG_SYS_I2C_EARLY_INIT
 #define CONFIG_SYS_NO_FLASH
-#undef CONFIG_CMD_IMLS
 #endif
 
 /*
@@ -379,22 +382,25 @@ unsigned long get_board_ddr_clk(void);
 #endif
 #endif
 
+/* USB */
+#define CONFIG_HAS_FSL_XHCI_USB
+#ifdef CONFIG_HAS_FSL_XHCI_USB
+#define CONFIG_USB_XHCI_FSL
+#define CONFIG_USB_MAX_CONTROLLER_COUNT		3
+#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS	2
+#define CONFIG_USB_STORAGE
+#endif
+
 /*
  * Miscellaneous configurable options
  */
 #define CONFIG_MISC_INIT_R
 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
-#define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser */
-#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
-#define CONFIG_SYS_PROMPT		"=> "
 #define CONFIG_AUTO_COMPLETE
 #define CONFIG_SYS_PBSIZE		\
 		(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
 
-#define CONFIG_CMD_GREPENV
-#define CONFIG_CMD_MEMINFO
-#define CONFIG_CMD_MEMTEST
 #define CONFIG_SYS_MEMTEST_START	0x80000000
 #define CONFIG_SYS_MEMTEST_END		0x9fffffff
 
@@ -441,10 +447,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_ENV_SIZE			0x20000
 #endif
 
-#define CONFIG_OF_LIBFDT
-#define CONFIG_OF_BOARD_SETUP
-#define CONFIG_CMD_BOOTZ
-#define CONFIG_CMD_MII
 #define CONFIG_CMDLINE_TAG
 
 #include <asm/fsl_secure_boot.h>