X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Flwmon5.h;h=6893bf24ff2691c5b6202694edbb9826dfe09d3e;hb=7f0ef5a945a0a9cef773c2b05b157d2fef3ea7ad;hp=69172bb9952da9800cd7124251460508e6b5d2f4;hpb=80d307d1159b7edfc28b465e5a359c1dfb20566e;p=u-boot

diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h
index 69172bb995..6893bf24ff 100644
--- a/include/configs/lwmon5.h
+++ b/include/configs/lwmon5.h
@@ -11,11 +11,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-/*
- * Liebherr extra version info
- */
-#define CONFIG_IDENT_STRING	" - v2.0"
-
 /*
  * High Level Configuration Options
  */
@@ -23,7 +18,6 @@
 #define CONFIG_440EPX		1		/* Specific PPC440EPx	*/
 #define CONFIG_440		1		/* ... PPC440 family	*/
 
-
 #define CONFIG_SYS_TEXT_BASE	0xFFF80000
 #define CONFIG_HOSTNAME		lwmon5
 
@@ -31,7 +25,6 @@
 
 #define CONFIG_4xx_DCACHE		/* enable cache in SDRAM	*/
 
-#define CONFIG_BOARD_EARLY_INIT_F	/* Call board_early_init_f	*/
 #define CONFIG_BOARD_EARLY_INIT_R	/* Call board_early_init_r	*/
 #define CONFIG_BOARD_POSTCLK_INIT	/* Call board_postclk_init	*/
 #define CONFIG_MISC_INIT_R		/* Call misc_init_r		*/
@@ -106,7 +99,6 @@
 #define CONFIG_SYS_NS16550_REG_SIZE	1
 #define CONFIG_SYS_NS16550_CLK		get_serial_clock()
 #undef CONFIG_SYS_EXT_SERIAL_CLOCK		/* no external clock provided	*/
-#define CONFIG_BAUDRATE		115200
 
 #define CONFIG_SYS_BAUDRATE_TABLE						\
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
@@ -261,7 +253,6 @@
 /* Reserve GPT0_COMP1-COMP5 for logbuffer header */
 #define CONFIG_ALT_LH_ADDR	(CONFIG_SYS_PERIPHERAL_BASE + GPT0_COMP1)
 #define CONFIG_ALT_LB_ADDR	(CONFIG_SYS_OCM_BASE)
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */
 
 /*
  * I2C
@@ -300,16 +291,9 @@
 					 CONFIG_SYS_I2C_DSPIC_KEYB_ADDR,\
 					 CONFIG_SYS_I2C_DSPIC_IO_ADDR }
 
-/*
- * Pass open firmware flat tree
- */
-#define CONFIG_OF_LIBFDT
-#define CONFIG_OF_BOARD_SETUP
 /* Update size in "reg" property of NOR FLASH device tree nodes */
 #define CONFIG_FDT_FIXUP_NOR_FLASH_SIZE
 
-#define CONFIG_FIT			/* enable FIT image support	*/
-
 #define	CONFIG_POST_KEY_MAGIC	"3C+3E"	/* press F3 + F5 keys to force POST */
 
 #define	CONFIG_PREBOOT		"setenv bootdelay 15"
@@ -348,7 +332,6 @@
 	""
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
-#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
 #define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
@@ -368,34 +351,24 @@
 #define CONFIG_PHY1_ADDR	1
 
 /* Video console */
-#define CONFIG_VIDEO
 #define CONFIG_VIDEO_MB862xx
 #define CONFIG_VIDEO_MB862xx_ACCEL
-#define CONFIG_CFB_CONSOLE
 #define CONFIG_VIDEO_LOGO
-#define CONFIG_CONSOLE_EXTRA_INFO
 #define VIDEO_FB_16BPP_PIXEL_SWAP
 #define VIDEO_FB_16BPP_WORD_SWAP
 
-#define CONFIG_VGA_AS_SINGLE_DEVICE
-#define CONFIG_VIDEO_SW_CURSOR
 #define CONFIG_SPLASH_SCREEN
 
 /*
  * USB/EHCI
  */
-#define CONFIG_USB_EHCI			/* Enable EHCI USB support	*/
 #define CONFIG_USB_EHCI_PPC4XX		/* on PPC4xx platform		*/
 #define CONFIG_SYS_PPC4XX_USB_ADDR	0xe0000300
 #define CONFIG_EHCI_MMIO_BIG_ENDIAN
 #define CONFIG_EHCI_DESC_BIG_ENDIAN
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* re-init HCD after CMD_RESET */
-#define CONFIG_USB_STORAGE
 
 /* Partitions */
-#define CONFIG_MAC_PARTITION
-#define CONFIG_DOS_PARTITION
-#define CONFIG_ISO_PARTITION
 
 /*
  * BOOTP options
@@ -408,25 +381,12 @@
 /*
  * Command line configuration.
  */
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DIAG
 #define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_I2C
 #define CONFIG_CMD_IRQ
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
 #define CONFIG_CMD_REGINFO
 #define CONFIG_CMD_SDRAM
 
-#ifdef CONFIG_VIDEO
-#define CONFIG_CMD_BMP
-#endif
-
 #ifdef CONFIG_440EPX
-#define CONFIG_CMD_USB
 #endif
 
 /*
@@ -436,8 +396,6 @@
 
 #define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
 
-#define CONFIG_SYS_HUSH_PARSER		1	/* Use the HUSH parser		*/
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_SYS_CBSIZE	        1024	/* Console I/O Buffer Size	*/
 #else
@@ -454,11 +412,7 @@
 #define CONFIG_SYS_EXTBDINFO		1	/* To use extended board_into (bd_t) */
 
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
-#define CONFIG_LOOPW            1       /* enable loopw command         */
 #define CONFIG_MX_CYCLIC        1       /* enable mdc/mwc commands      */
-#define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
-
-#define CONFIG_SYS_CONSOLE_INFO_QUIET	/* don't print console @ startup*/
 
 #ifndef DEBUG
 #define CONFIG_HW_WATCHDOG	1	/* Use external HW-Watchdog	*/