X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fm28evk.h;h=e7fd6395e09b932320e5f60990f1f88557d78c3d;hb=fc5d54b7fa3fa602e06e2f0863c0b134d6afca70;hp=322b45fd990709c256e5b7cda4a26bbb2b786470;hpb=fc532a921aae1151dd39322d8f50b55a735de8d5;p=u-boot

diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h
index 322b45fd99..e7fd6395e0 100644
--- a/include/configs/m28evk.h
+++ b/include/configs/m28evk.h
@@ -12,45 +12,21 @@
 #define MACH_TYPE_M28EVK	3613
 #define CONFIG_MACH_TYPE	MACH_TYPE_M28EVK
 
-#define CONFIG_FIT
-
 #define CONFIG_TIMESTAMP		/* Print image info with timestamp */
 
 /* U-Boot Commands */
 #define CONFIG_SYS_NO_FLASH
-#include <config_cmd_default.h>
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DOS_PARTITION
 #define CONFIG_FAT_WRITE
 
-#define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_BMP
-#define CONFIG_CMD_CACHE
 #define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
 #define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_EXT4
-#define CONFIG_CMD_EXT4_WRITE
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_FS_GENERIC
-#define CONFIG_CMD_GPIO
-#define CONFIG_CMD_GREPENV
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_MMC
 #define CONFIG_CMD_NAND
 #define CONFIG_CMD_NAND_TRIMFFS
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_SETEXPR
-#define CONFIG_CMD_SF
-#define CONFIG_CMD_SPI
-#define CONFIG_CMD_USB
 #define	CONFIG_VIDEO
 
-#define CONFIG_REGEX			/* Enable regular expression support */
-
 /* Memory configuration */
 #define CONFIG_NR_DRAM_BANKS		1		/* 1 bank of DRAM */
 #define PHYS_SDRAM_1			0x40000000	/* Base address */
@@ -97,7 +73,6 @@
 
 /* EEPROM */
 #ifdef CONFIG_CMD_EEPROM
-#define CONFIG_SYS_I2C_MULTI_EEPROMS
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2
 #endif
 
@@ -130,8 +105,6 @@
 
 /* SPI FLASH */
 #ifdef CONFIG_CMD_SF
-#define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_STMICRO
 #define CONFIG_SF_DEFAULT_BUS		2
 #define CONFIG_SF_DEFAULT_CS		0
 #define CONFIG_SF_DEFAULT_SPEED		40000000
@@ -157,7 +130,6 @@
 #endif
 
 /* Booting Linux */
-#define CONFIG_BOOTDELAY	3
 #define CONFIG_BOOTFILE		"fitImage"
 #define CONFIG_BOOTARGS		"console=ttyAMA0,115200n8 "
 #define CONFIG_BOOTCOMMAND	"run mmc_mmc"
@@ -171,6 +143,7 @@
 #define CONFIG_EXTRA_ENV_SETTINGS					\
 	"consdev=ttyAMA0\0"						\
 	"baudrate=115200\0"						\
+	"bootscript=boot.scr\0"						\
 	"bootdev=/dev/mmcblk0p2\0"					\
 	"rootdev=/dev/mmcblk0p3\0"					\
 	"netdev=eth0\0"							\
@@ -282,9 +255,9 @@
 		"mmc rescan;"						\
 		"if test -e mmc 0:2 ${bootscript} ; then "		\
 		"if load mmc 0:2 ${kernel_addr_r} ${bootscript};"	\
-		"then;"							\
-			"\techo Running bootscript...;"			\
-			"\tsource ${kernel_addr_r};"			\
+		"then ; "						\
+			"echo Running bootscript... ; "			\
+			"source ${kernel_addr_r} ; "			\
 		"fi ; "							\
 		"fi\0"