X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fmecp5123.h;h=f5765b0d4e18997137b6e96afb3c37ef80c84f18;hb=79874ae9341d000d7428ae05d3bce54d90adb81c;hp=fe32bb2cb8b9eaf6306391386290add0b42a23a6;hpb=14d0a02a168b36e87665b8d7f42fa3e88263d26d;p=u-boot

diff --git a/include/configs/mecp5123.h b/include/configs/mecp5123.h
index fe32bb2cb8..f5765b0d4e 100644
--- a/include/configs/mecp5123.h
+++ b/include/configs/mecp5123.h
@@ -48,6 +48,8 @@
 #define CONFIG_E300		1	/* E300 Family */
 #define CONFIG_MPC512X		1	/* MPC512X family */
 
+#define	CONFIG_SYS_TEXT_BASE	0xFFF00000
+
 #define CONFIG_SYS_MPC512X_CLKIN	33333333	/* in Hz */
 
 #define CONFIG_BOARD_EARLY_INIT_F		/* call board_early_init_f() */
@@ -176,9 +178,7 @@
 #define CONFIG_CMD_NAND
 #define CONFIG_NAND_MPC5121_NFC
 #define CONFIG_SYS_NAND_BASE            0x40000000
-
 #define CONFIG_SYS_MAX_NAND_DEVICE      1
-#define NAND_MAX_CHIPS                  CONFIG_SYS_MAX_NAND_DEVICE
 
 /*
  * Configuration parameters for MPC5121 NAND driver
@@ -204,10 +204,9 @@
 
 /* Use SRAM for initial stack */
 #define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_SRAM_BASE /* Init RAM addr */
-#define CONFIG_SYS_INIT_RAM_END		CONFIG_SYS_SRAM_SIZE
+#define CONFIG_SYS_INIT_RAM_SIZE		CONFIG_SYS_SRAM_SIZE
 
-#define CONFIG_SYS_GBL_DATA_SIZE	0x100		/* num bytes initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 #define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_TEXT_BASE	/* Start of monitor */
@@ -267,7 +266,6 @@
  * Ethernet configuration
  */
 #define CONFIG_MPC512x_FEC	1
-#define CONFIG_NET_MULTI
 #define CONFIG_PHY_ADDR		0x1
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_FEC_AN_TIMEOUT	1
@@ -361,14 +359,6 @@
 
 #define CONFIG_HIGH_BATS	1	/* High BATs supported */
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM		0x02	/* Software reboot */
-
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
@@ -380,8 +370,8 @@
 #define CONFIG_TIMESTAMP
 
 #define CONFIG_HOSTNAME		mecp512x
-#define CONFIG_BOOTFILE		/tftpboot/mecp512x/uImage
-#define CONFIG_ROOTPATH		/tftpboot/mecp512x/target_root
+#define CONFIG_BOOTFILE		"/tftpboot/mecp512x/uImage"
+#define CONFIG_ROOTPATH		"/tftpboot/mecp512x/target_root"
 
 #define CONFIG_LOADADDR		400000	/* def. location for tftp and bootm */