X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fmotionpro.h;h=2a83c608b1c19f864af2df35f471ca97adfdbed2;hb=3bac8303e4840f6902a51f9665696ff3939596f4;hp=d7383a62c69072664bc8cde3d01221e44e1ebe53;hpb=3be2bdf5dc69b3142c1162a59bc67191c9077567;p=u-boot

diff --git a/include/configs/motionpro.h b/include/configs/motionpro.h
index d7383a62c6..2a83c608b1 100644
--- a/include/configs/motionpro.h
+++ b/include/configs/motionpro.h
@@ -4,7 +4,7 @@
  *
  * Based on Motion-PRO board config file by Robert McCullough, rob@promessinc.com
  *
- * SPDX-License-Identifier:	GPL-2.0+ 
+ * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -15,9 +15,9 @@
  */
 
 /* CPU and board */
-#define CONFIG_MPC5xxx		1	/* This is an MPC5xxx CPU */
-#define CONFIG_MPC5200		1	/* More exactly a MPC5200 */
+#define CONFIG_MPC5200		1	/* This is a MPC5200 CPU */
 #define CONFIG_MOTIONPRO	1	/* ... on Promess Motion-PRO board */
+#define CONFIG_DISPLAY_BOARDINFO
 
 #define CONFIG_HIGH_BATS	1	/* High BATs supported */
 
@@ -34,23 +34,13 @@
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_BEDBUG
 #define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
 #define CONFIG_CMD_DTT
 #define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_I2C
 #define CONFIG_CMD_IDE
 #define CONFIG_CMD_IMMAP
 #define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_PING
 #define CONFIG_CMD_REGINFO
 
 /*
@@ -73,21 +63,10 @@
 /*
  * Autobooting
  */
-#define CONFIG_BOOTDELAY	2	/* autoboot after 2 seconds */
-#define CONFIG_AUTOBOOT_KEYED
-#define CONFIG_AUTOBOOT_STOP_STR	"\x1b\x1b"
-#define DEBUG_BOOTKEYS		0
-#undef CONFIG_AUTOBOOT_DELAY_STR
 #undef CONFIG_BOOTARGS
-#define CONFIG_AUTOBOOT_PROMPT	"Autobooting in %d seconds, "		\
-				"press \"<Esc><Esc>\" to stop\n", bootdelay
 
 #define CONFIG_CMDLINE_EDITING		1	/* add command line history	*/
-#define	CONFIG_SYS_HUSH_PARSER		1	/* use "hush" command parser	*/
-#define	CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 
-#define CONFIG_ETHADDR		00:50:C2:40:10:00
-#define CONFIG_OVERWRITE_ETHADDR_ONCE	1
 #define CONFIG_VERSION_VARIABLE	1	/* include version env variable */
 
 /*
@@ -297,7 +276,6 @@
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	1	/* 2 bytes per write cycle */
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	5	/* 2ms/cycle + 3ms extra */
-#define CONFIG_SYS_I2C_MULTI_EEPROMS		1	/* 2 EEPROMs (addr:50,52) */
 
 /*
  * RTC configuration
@@ -368,7 +346,6 @@ extern void __led_set(led_id_t id, int state);
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP			/* undef to save memory    */
-#define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt   */
 #define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size */
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
 #define CONFIG_SYS_MAXARGS		16		/* max number of command args */
@@ -380,8 +357,6 @@ extern void __led_set(led_id_t id, int state);
 
 #define CONFIG_SYS_LOAD_ADDR		0x200000	/* default kernel load addr */
 
-#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
-
 /*
  * Various low-level settings
  */
@@ -393,10 +368,6 @@ extern void __led_set(led_id_t id, int state);
 /* Not needed for MPC 5xxx U-Boot, but used by tools/updater */
 #define CONFIG_SYS_RESET_ADDRESS	0xfff00100
 
-/* pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT	1
-#define CONFIG_OF_BOARD_SETUP	1
-
 #define OF_CPU			"PowerPC,5200@0"
 #define OF_SOC			"soc5200@f0000000"
 #define OF_TBCLK		(bd->bi_busfreq / 4)