X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fmunices.h;h=1679430951755ecc79ce858691d8362cd8cc64b4;hb=d29adf8eef4e9557326fd0bc09a08c7dfa688eab;hp=7700a1d57dfaf62405ca0e94f540614725b5021b;hpb=1a4596601fd395f3afb8f82f3f840c5e00bdd57a;p=u-boot

diff --git a/include/configs/munices.h b/include/configs/munices.h
index 7700a1d57d..1679430951 100644
--- a/include/configs/munices.h
+++ b/include/configs/munices.h
@@ -2,7 +2,7 @@
  * (C) Copyright 2007
  * Heiko Schocher, DENX Software Engineering, hs@denx.de.
  *
- * SPDX-License-Identifier:	GPL-2.0+ 
+ * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -11,8 +11,7 @@
  * High Level Configuration Options
  * (easy to change)
  */
-#define CONFIG_MPC5xxx		1	/* This is an MPC5xxx CPU */
-#define CONFIG_MPC5200		1	/* (more precisely an MPC5200 CPU) */
+#define CONFIG_MPC5200		1	/* This is an MPC5200 CPU */
 #define CONFIG_MPC5200_DDR	1	/* (with DDR-SDRAM) */
 #define CONFIG_MUNICES		1	/* ... on MUNICes board */
 
@@ -27,13 +26,7 @@
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_ELF
 #define CONFIG_CMD_IMMAP
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_PING
 #define CONFIG_CMD_REGINFO
 
 #if defined(CONFIG_CMD_KGDB)
@@ -44,11 +37,9 @@
  * Serial console configuration
  */
 #define CONFIG_PSC_CONSOLE	1	/* console is on PSC1 */
-#define CONFIG_BAUDRATE		115200	/* ... at 115200 bps */
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 #define	CONFIG_TIMESTAMP	1	/* Print image info with timestamp */
-#define CONFIG_BOOTDELAY	5   /* autoboot after 5 seconds */
 #undef	CONFIG_BOOTARGS
 
 #define CONFIG_PREBOOT	"echo;"	\
@@ -166,7 +157,6 @@
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP			/* undef to save memory	    */
-#define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt   */
 #define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size  */
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
 #define CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
@@ -176,9 +166,7 @@
 #define CONFIG_SYS_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
 
 #define CONFIG_SYS_LOAD_ADDR		0x200000	/* default load address */
-#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
 
-#define CONFIG_DISPLAY_BOARDINFO 1
 #define CONFIG_CMDLINE_EDITING  1
 
 /*
@@ -191,10 +179,6 @@
 #define CONFIG_SYS_CS_DEADCYCLE	0x33333333
 #define CONFIG_SYS_RESET_ADDRESS	0xff000000
 
-/* pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT	1
-#define CONFIG_OF_BOARD_SETUP	1
-
 #define OF_CPU			"PowerPC,5200@0"
 #define OF_TBCLK		(bd->bi_busfreq / 4)
 #define OF_SOC                  "soc5200@f0000000"