X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fmx6cuboxi.h;h=d649172d5fc8b5414ae406d3067acd8e88cce5ab;hb=d10fc50f78ebae7c7f52469eced7c0d6d8a89f8c;hp=4feb12194bce7f2ea90a55e5c664e02593f9f16c;hpb=3d99e862691bb7053ba9e1537a971971976fde13;p=u-boot

diff --git a/include/configs/mx6cuboxi.h b/include/configs/mx6cuboxi.h
index 4feb12194b..d649172d5f 100644
--- a/include/configs/mx6cuboxi.h
+++ b/include/configs/mx6cuboxi.h
@@ -11,39 +11,34 @@
 #include <config_distro_defaults.h>
 #include "mx6_common.h"
 
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_MMC_SUPPORT
 #include "imx6_spl.h"
 
 #define CONFIG_IMX_THERMAL
 
 #define CONFIG_SYS_MALLOC_LEN		(10 * SZ_1M)
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_BOARD_LATE_INIT
 #define CONFIG_MXC_UART
 
 /* MMC Configs */
 #define CONFIG_SYS_FSL_ESDHC_ADDR	USDHC2_BASE_ADDR
 
+/* SATA Configuration */
+#ifdef CONFIG_CMD_SATA
+#define CONFIG_SYS_SATA_MAX_DEVICE      1
+#define CONFIG_DWC_AHSATA_PORT_ID       0
+#define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
+#define CONFIG_LBA48
+#endif
+
 /* Ethernet Configuration */
 #define CONFIG_FEC_MXC
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_MII
 #define CONFIG_MII
 #define IMX_FEC_BASE			ENET_BASE_ADDR
 #define CONFIG_FEC_XCV_TYPE		RGMII
 #define CONFIG_FEC_MXC_PHYADDR		0
-#define CONFIG_PHYLIB
 #define CONFIG_PHY_ATHEROS
 
 /* Framebuffer */
-#define CONFIG_VIDEO
 #define CONFIG_VIDEO_IPUV3
-#define CONFIG_IPUV3_CLK		260000000
-#define CONFIG_CFB_CONSOLE
-#define CONFIG_VGA_AS_SINGLE_DEVICE
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
 #define CONFIG_VIDEO_BMP_RLE8
 #define CONFIG_SPLASH_SCREEN
 #define CONFIG_SPLASH_SCREEN_ALIGN
@@ -51,21 +46,13 @@
 #define CONFIG_VIDEO_LOGO
 #define CONFIG_VIDEO_BMP_LOGO
 #define CONFIG_IMX_HDMI
-#define CONFIG_CMD_HDMIDETECT
 #define CONFIG_IMX_VIDEO_SKIP
-#define CONFIG_CONSOLE_MUX
 
 /* USB */
-#define CONFIG_CMD_USB
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_MX6
-#define CONFIG_USB_STORAGE
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS		0
 #define CONFIG_USB_MAX_CONTROLLER_COUNT	2
-#define CONFIG_USB_KEYBOARD
-#define CONFIG_SYS_USB_EVENT_POLL
 #define CONFIG_PREBOOT \
 	"if hdmidet; then " \
 		"usb start; "		       \
@@ -81,7 +68,7 @@
 /* Command definition */
 
 #define CONFIG_MXC_UART_BASE	UART1_BASE
-#define CONFIG_CONSOLE_DEV	"ttymxc0"
+#define CONSOLE_DEV	"ttymxc0"
 #define CONFIG_SYS_FSL_USDHC_NUM	1
 #define CONFIG_SYS_MMC_ENV_DEV		0	/* SDHC2 */
 
@@ -99,9 +86,10 @@
 	"initrd_high=0xffffffff\0" \
 	"fdt_high=0xffffffff\0" \
 	"ip_dyn=yes\0" \
-	"console=" CONFIG_CONSOLE_DEV "\0" \
+	"console=" CONSOLE_DEV ",115200\0" \
 	"bootm_size=0x10000000\0" \
 	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
+	"finduuid=part uuid mmc 0:1 uuid\0" \
 	"update_sd_firmware=" \
 		"if test ${ip_dyn} = yes; then " \
 			"setenv get_cmd dhcp; " \
@@ -116,6 +104,10 @@
 			"fi; "	\
 		"fi\0" \
 	"findfdt="\
+		"if test $board_name = HUMMINGBOARD2 && test $board_rev = MX6Q ; then " \
+			"setenv fdtfile imx6q-hummingboard2.dtb; fi; " \
+		"if test $board_name = HUMMINGBOARD2 && test $board_rev = MX6DL ; then " \
+			"setenv fdtfile imx6dl-hummingboard2.dtb; fi; " \
 		"if test $board_name = HUMMINGBOARD && test $board_rev = MX6Q ; then " \
 			"setenv fdtfile imx6q-hummingboard.dtb; fi; " \
 		"if test $board_name = HUMMINGBOARD && test $board_rev = MX6DL ; then " \
@@ -128,12 +120,9 @@
 			"echo WARNING: Could not determine dtb to use; fi; \0" \
 	BOOTENV
 
-#define CONFIG_BOOTCOMMAND \
-	"run findfdt; " \
-	"run distro_bootcmd"
-
 #define BOOT_TARGET_DEVICES(func) \
 	func(MMC, mmc, 0) \
+	func(SATA, sata, 0) \
 	func(USB, usb, 0) \
 	func(PXE, pxe, na) \
 	func(DHCP, dhcp, na)
@@ -157,7 +146,6 @@
 
 /* Environment organization */
 #define CONFIG_ENV_SIZE			(8 * 1024)
-#define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_ENV_OFFSET		(8 * 64 * 1024)
 
 #endif                         /* __MX6CUBOXI_CONFIG_H */