X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fmx6sabre_common.h;h=1ee880d9df9ba39b6633f7e9aaee9148769f2722;hb=9f03247edc7761b608db31104821b4518a70e691;hp=9dcc64ea5796e700e016baf9c66557c3ea23f2ab;hpb=b8d242121dd3c8c418751c37e6f7157cf6428dbf;p=u-boot

diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h
index 9dcc64ea57..1ee880d9df 100644
--- a/include/configs/mx6sabre_common.h
+++ b/include/configs/mx6sabre_common.h
@@ -24,9 +24,6 @@
 /* MMC Configs */
 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
 
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_MII
 #define CONFIG_FEC_MXC
 #define CONFIG_MII
 #define IMX_FEC_BASE			ENET_BASE_ADDR
@@ -37,9 +34,7 @@
 #define CONFIG_PHYLIB
 #define CONFIG_PHY_ATHEROS
 
-#define CONFIG_CMD_SF
 #ifdef CONFIG_CMD_SF
-#define CONFIG_SPI_FLASH_STMICRO
 #define CONFIG_MXC_SPI
 #define CONFIG_SF_DEFAULT_BUS		0
 #define CONFIG_SF_DEFAULT_CS		0
@@ -158,6 +153,8 @@
 					"setenv fdt_file imx6q-sabreauto.dtb; fi; " \
 				"if test $board_name = SABREAUTO && test $board_rev = MX6DL; then " \
 					"setenv fdt_file imx6dl-sabreauto.dtb; fi; " \
+				"if test $board_name = SABRESD && test $board_rev = MX6QP; then " \
+					"setenv fdt_file imx6qp-sabresd.dtb; fi; " \
 				"if test $board_name = SABRESD && test $board_rev = MX6Q; then " \
 					"setenv fdt_file imx6q-sabresd.dtb; fi; " \
 				"if test $board_name = SABRESD && test $board_rev = MX6DL; then " \
@@ -166,7 +163,6 @@
 					"echo WARNING: Could not determine dtb to use; fi; " \
 			"fi;\0" \
 
-
 #define CONFIG_BOOTCOMMAND \
 	"run findfdt;" \
 	"mmc dev ${mmcdev};" \
@@ -208,7 +204,7 @@
 #define CONFIG_ENV_IS_IN_MMC
 
 #if defined(CONFIG_ENV_IS_IN_MMC)
-#define CONFIG_ENV_OFFSET		(8 * 64 * 1024)
+#define CONFIG_ENV_OFFSET		(768 * 1024)
 #endif
 
 /* Framebuffer */
@@ -224,24 +220,18 @@
 #define CONFIG_BMP_16BPP
 #define CONFIG_VIDEO_LOGO
 #define CONFIG_VIDEO_BMP_LOGO
-#define CONFIG_IPUV3_CLK 260000000
+#ifdef CONFIG_MX6DL
+#define CONFIG_IPUV3_CLK 198000000
+#else
+#define CONFIG_IPUV3_CLK 264000000
+#endif
 #define CONFIG_IMX_HDMI
 #define CONFIG_IMX_VIDEO_SKIP
 
 #ifndef CONFIG_SPL
-#define CONFIG_CI_UDC
 #define CONFIG_USBD_HS
-#define CONFIG_USB_GADGET_DUALSPEED
 
-#define CONFIG_USB_GADGET
-#define CONFIG_CMD_USB_MASS_STORAGE
 #define CONFIG_USB_FUNCTION_MASS_STORAGE
-#define CONFIG_USB_GADGET_DOWNLOAD
-#define CONFIG_USB_GADGET_VBUS_DRAW	2
-
-#define CONFIG_G_DNL_VENDOR_NUM		0x0525
-#define CONFIG_G_DNL_PRODUCT_NUM	0xa4a5
-#define CONFIG_G_DNL_MANUFACTURER	"FSL"
 
 #define CONFIG_USB_FUNCTION_FASTBOOT
 #define CONFIG_CMD_FASTBOOT
@@ -250,7 +240,6 @@
 #define CONFIG_FASTBOOT_BUF_SIZE   0x07000000
 
 /* USB Device Firmware Update support */
-#define CONFIG_CMD_DFU
 #define CONFIG_USB_FUNCTION_DFU
 #define CONFIG_DFU_MMC
 #define CONFIG_DFU_SF