X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fmx7dsabresd.h;h=593bf38d7e93d66e4a5d8ff3a41d820f23c3f761;hb=4c3aebd56a035740f04fce44ce6c398afbb5ad86;hp=38bcad2288bbd13adf7e6903ee8443f13e547750;hpb=ef26d6039a14c03c516c09a7835b491e671a4b0b;p=u-boot

diff --git a/include/configs/mx7dsabresd.h b/include/configs/mx7dsabresd.h
index 38bcad2288..593bf38d7e 100644
--- a/include/configs/mx7dsabresd.h
+++ b/include/configs/mx7dsabresd.h
@@ -19,13 +19,6 @@
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN		(32 * SZ_1M)
 
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_BOARD_LATE_INIT
-
-/* Uncomment to enable secure boot support */
-/* #define CONFIG_SECURE_BOOT */
-#define CONFIG_CSF_SIZE			0x4000
-
 /* Network */
 #define CONFIG_FEC_MXC
 #define CONFIG_MII
@@ -33,7 +26,6 @@
 #define CONFIG_ETHPRIME                 "FEC"
 #define CONFIG_FEC_MXC_PHYADDR          0
 
-#define CONFIG_PHYLIB
 #define CONFIG_PHY_BROADCOM
 /* ENET1 */
 #define IMX_FEC_BASE			ENET_IPS_BASE_ADDR
@@ -41,20 +33,12 @@
 /* MMC Config*/
 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
 
-/* PMIC */
-#define CONFIG_POWER
-#define CONFIG_POWER_I2C
-#define CONFIG_POWER_PFUZE3000
-#define CONFIG_POWER_PFUZE3000_I2C_ADDR	0x08
-
 #undef CONFIG_BOOTM_NETBSD
 #undef CONFIG_BOOTM_PLAN9
 #undef CONFIG_BOOTM_RTEMS
 
 /* I2C configs */
-#define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
 #define CONFIG_SYS_I2C_SPEED		100000
 
 #define CONFIG_SUPPORT_EMMC_BOOT	/* eMMC specific */
@@ -185,8 +169,6 @@
 #define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
 #define CONFIG_SYS_HZ			1000
 
-#define CONFIG_STACKSIZE		SZ_128K
-
 /* Physical Memory Map */
 #define CONFIG_NR_DRAM_BANKS		1
 #define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR
@@ -200,19 +182,14 @@
 #define CONFIG_SYS_INIT_SP_ADDR \
 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
-/* FLASH and environment organization */
-#define CONFIG_SYS_NO_FLASH
+/* environment organization */
 #define CONFIG_ENV_SIZE			SZ_8K
-#define CONFIG_ENV_IS_IN_MMC
 
 /*
  * If want to use nand, define CONFIG_NAND_MXS and rework board
  * to support nand, since emmc has pin conflicts with nand
  */
 #ifdef CONFIG_NAND_MXS
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_NAND_TRIMFFS
-
 /* NAND stuff */
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_SYS_NAND_BASE		0x40000000
@@ -225,7 +202,7 @@
 #define CONFIG_APBH_DMA_BURST8
 #endif
 
-#define CONFIG_ENV_OFFSET		(8 * SZ_64K)
+#define CONFIG_ENV_OFFSET		(12 * SZ_64K)
 #ifdef CONFIG_NAND_MXS
 #define CONFIG_SYS_FSL_USDHC_NUM	1
 #else
@@ -237,12 +214,7 @@
 #define CONFIG_MMCROOT			"/dev/mmcblk0p2"  /* USDHC1 */
 
 /* USB Configs */
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-#define CONFIG_USB_HOST_ETHER
-#define CONFIG_USB_ETHER_ASIX
 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
-#define CONFIG_MXC_USB_FLAGS   0
-#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 
 #define CONFIG_IMX_THERMAL
 
@@ -251,14 +223,10 @@
 #define CONFIG_USB_FUNCTION_MASS_STORAGE
 
 #ifdef CONFIG_VIDEO
-#define CONFIG_CFB_CONSOLE
 #define CONFIG_VIDEO_MXS
 #define CONFIG_VIDEO_LOGO
-#define CONFIG_VIDEO_SW_CURSOR
-#define CONFIG_VGA_AS_SINGLE_DEVICE
 #define CONFIG_SPLASH_SCREEN
 #define CONFIG_SPLASH_SCREEN_ALIGN
-#define CONFIG_CMD_BMP
 #define CONFIG_BMP_16BPP
 #define CONFIG_VIDEO_BMP_RLE8
 #define CONFIG_VIDEO_BMP_LOGO