X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fnitrogen6x.h;h=8ef4b733ca43e93fa67fea79d00c271cbff2984b;hb=30dc880ad11f8a4fe95f25b1890f5e51aa4dee96;hp=21a25e073404987f5f1284a36f5144a13fb91f86;hpb=5b7103e0af5435d68489b2b579e9e46226782e64;p=u-boot

diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h
index 21a25e0734..8ef4b733ca 100644
--- a/include/configs/nitrogen6x.h
+++ b/include/configs/nitrogen6x.h
@@ -32,6 +32,7 @@
 #define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_MISC_INIT_R
 #define CONFIG_MXC_GPIO
+#define CONFIG_CMD_GPIO
 #define CONFIG_CI_UDC
 #define CONFIG_USBD_HS
 #define CONFIG_USB_GADGET_DUALSPEED
@@ -53,7 +54,7 @@
 #define CONFIG_SPI_FLASH_SST
 #define CONFIG_MXC_SPI
 #define CONFIG_SF_DEFAULT_BUS  0
-#define CONFIG_SF_DEFAULT_CS   (0|(IMX_GPIO_NR(3, 19)<<8))
+#define CONFIG_SF_DEFAULT_CS   0
 #define CONFIG_SF_DEFAULT_SPEED 25000000
 #define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
 #endif
@@ -63,6 +64,7 @@
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
 #define CONFIG_SYS_I2C_SPEED		100000
+#define CONFIG_I2C_EDID
 
 /* MMC Configs */
 #define CONFIG_FSL_ESDHC
@@ -75,6 +77,8 @@
 #define CONFIG_GENERIC_MMC
 #define CONFIG_BOUNCE_BUFFER
 #define CONFIG_CMD_EXT2
+#define CONFIG_CMD_EXT4
+#define CONFIG_CMD_EXT4_WRITE
 #define CONFIG_CMD_FAT
 #define CONFIG_DOS_PARTITION
 
@@ -122,6 +126,8 @@
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET	/* For OTG port */
 #define CONFIG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS	0
+#define CONFIG_USB_KEYBOARD
+#define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
 
 /* Miscellaneous commands */
 #define CONFIG_CMD_BMODE
@@ -137,7 +143,6 @@
 #define CONFIG_VIDEO_BMP_RLE8
 #define CONFIG_SPLASH_SCREEN
 #define CONFIG_BMP_16BPP
-#define CONFIG_VIDEO_LOGO
 #define CONFIG_IPUV3_CLK 260000000
 #define CONFIG_CMD_HDMIDETECT
 #define CONFIG_CONSOLE_MUX
@@ -180,6 +185,7 @@
 #endif
 
 #define CONFIG_DRIVE_TYPES CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC CONFIG_DRIVE_USB
+#define CONFIG_UMSDEVS CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC
 
 #if defined(CONFIG_SABRELITE)
 #define CONFIG_EXTRA_ENV_SETTINGS \
@@ -260,6 +266,7 @@
 #else
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"bootdevs=" CONFIG_DRIVE_TYPES "\0" \
+	"umsdevs=" CONFIG_UMSDEVS "\0" \
 	"console=ttymxc1\0" \
 	"clearenv=if sf probe || sf probe || sf probe 1 ; then " \
 		"sf erase 0xc0000 0x2000 && " \
@@ -270,28 +277,44 @@
 				"usb start ;" \
 			"fi; " \
 			"for disk in 0 1 ; do ${dtype} dev ${disk} ;" \
-				"for fs in fat ext2 ; do " \
-					"${fs}load " \
-						"${dtype} ${disk}:1 " \
-						"10008000 " \
-						"/6x_bootscript" \
-						"&& source 10008000 ; " \
-				"done ; " \
+				"load " \
+					"${dtype} ${disk}:1 " \
+					"10008000 " \
+					"/6x_bootscript" \
+					"&& source 10008000 ; " \
 			"done ; " \
 		"done; " \
 		"setenv stdout serial,vga ; " \
 		"echo ; echo 6x_bootscript not found ; " \
 		"echo ; echo serial console at 115200, 8N1 ; echo ; " \
 		"echo details at http://boundarydevices.com/6q_bootscript ; " \
-		"setenv stdout serial\0" \
+		"setenv stdout serial;" \
+		"setenv stdin serial,usbkbd;" \
+		"for dtype in ${umsdevs} ; do " \
+			"if itest.s sata == ${dtype}; then " \
+				"initcmd='sata init' ;" \
+			"else " \
+				"initcmd='mmc rescan' ;" \
+			"fi; " \
+			"for disk in 0 1 ; do " \
+				"if $initcmd && $dtype dev $disk ; then " \
+					"setenv stdout serial,vga; " \
+					"echo expose ${dtype} ${disk} " \
+						"over USB; " \
+					"ums 0 $dtype $disk ;" \
+				"fi; " \
+		"	done; " \
+		"done ;" \
+		"setenv stdout serial,vga; " \
+		"echo no block devices found;" \
+		"\0" \
+	"initrd_high=0xffffffff\0" \
 	"upgradeu=for dtype in ${bootdevs}" \
 		"; do " \
 		"for disk in 0 1 ; do ${dtype} dev ${disk} ;" \
-		     "for fs in fat ext2 ; do " \
-				"${fs}load ${dtype} ${disk}:1 10008000 " \
-					"/6x_upgrade " \
-					"&& source 10008000 ; " \
-			"done ; " \
+			"load ${dtype} ${disk}:1 10008000 " \
+				"/6x_upgrade " \
+				"&& source 10008000 ; " \
 		"done ; " \
 	"done\0" \
 
@@ -302,10 +325,7 @@
 #define CONFIG_SYS_PROMPT	       "U-Boot > "
 #define CONFIG_AUTO_COMPLETE
 #define CONFIG_SYS_CBSIZE	       1024
-
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS	       16
+#define CONFIG_SYS_MAXARGS	       48
 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
 
 #define CONFIG_SYS_MEMTEST_START       0x10000000
@@ -362,6 +382,7 @@
 #define CONFIG_CMD_BMP
 
 #define CONFIG_CMD_TIME
+#define CONFIG_CMD_MEMTEST
 #define CONFIG_SYS_ALT_MEMTEST
 
 #define CONFIG_CMD_BOOTZ
@@ -391,4 +412,9 @@
 #define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5
 #define CONFIG_G_DNL_MANUFACTURER "Boundary"
 
+#define CONFIG_CMD_FASTBOOT
+#define CONFIG_ANDROID_BOOT_IMAGE
+#define CONFIG_USB_FASTBOOT_BUF_ADDR   CONFIG_SYS_LOAD_ADDR
+#define CONFIG_USB_FASTBOOT_BUF_SIZE   0x07000000
+
 #endif	       /* __CONFIG_H */