X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fnovena.h;h=8cb02820a96068dd978ab04f0d039e06b29ece79;hb=f666a658242e94d3413b4acfc2af4b4800ab3886;hp=0970fd75483e7ab9628bd76ff163bc0532587436;hpb=7c0e5d865ff0b86dfce492b656238919c659d756;p=u-boot

diff --git a/include/configs/novena.h b/include/configs/novena.h
index 0970fd7548..8cb02820a9 100644
--- a/include/configs/novena.h
+++ b/include/configs/novena.h
@@ -1,5 +1,5 @@
 /*
- * Configuration settings for the Novena U-boot.
+ * Configuration settings for the Novena U-Boot.
  *
  * Copyright (C) 2014 Marek Vasut <marex@denx.de>
  *
@@ -13,28 +13,20 @@
 #define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_BOARD_LATE_INIT
 #define CONFIG_MISC_INIT_R
-#define CONFIG_FIT
 #define CONFIG_KEYBOARD
 
+#include <config_distro_defaults.h>
 #include "mx6_common.h"
 
 /* U-Boot Commands */
-#define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_BMODE
-#define CONFIG_CMD_DHCP
 #define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_I2C
 #define CONFIG_FAT_WRITE
-#define CONFIG_CMD_MII
 #define CONFIG_CMD_PCI
-#define CONFIG_CMD_PING
 #define CONFIG_CMD_SATA
-#define CONFIG_CMD_TIME
-#define CONFIG_CMD_USB
 #define CONFIG_VIDEO
 
 /* U-Boot general configurations */
-#define CONFIG_VERSION_VARIABLE			/* U-BOOT version */
 
 /* U-Boot environment */
 #define CONFIG_ENV_SIZE			(16 * 1024)
@@ -58,13 +50,12 @@
 /* Booting Linux */
 #define CONFIG_BOOTFILE			"fitImage"
 #define CONFIG_BOOTARGS			"console=ttymxc1,115200 "
-#define CONFIG_BOOTCOMMAND		"run net_nfs"
+#define CONFIG_BOOTCOMMAND		"run distro_bootcmd ; run net_nfs"
 #define CONFIG_HOSTNAME			novena
 
 /* Physical Memory Map */
 #define CONFIG_NR_DRAM_BANKS		1
 #define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR
-#define PHYS_SDRAM_SIZE			0xF0000000
 
 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
 #define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
@@ -81,8 +72,6 @@
 #define CONFIG_SYS_MALLOC_LEN		(64 * 1024 * 1024)
 
 /* SPL */
-#define CONFIG_SPL_FAT_SUPPORT
-#define CONFIG_SPL_MMC_SUPPORT
 #include "imx6_spl.h"			/* common IMX6 SPL configuration */
 
 /* Ethernet Configuration */
@@ -102,15 +91,18 @@
 /* I2C */
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
+#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
 #define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
 #define CONFIG_I2C_MULTI_BUS
 #define CONFIG_I2C_MXC
 #define CONFIG_SYS_I2C_SPEED		100000
+#define CONFIG_SYS_SPD_BUS_NUM		0
 
 /* I2C EEPROM */
 #ifdef CONFIG_CMD_EEPROM
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2
-#define CONFIG_SYS_SPD_BUS_NUM		2
+#define CONFIG_SYS_I2C_EEPROM_BUS	2
 #endif
 
 /* MMC Configs */
@@ -151,8 +143,8 @@
 #ifdef CONFIG_CMD_USB
 #define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_MX6
-#define CONFIG_USB_STORAGE
 #define CONFIG_USB_KEYBOARD
+#define CONFIG_SYS_STDIO_DEREGISTER
 #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
 #define CONFIG_USB_HOST_ETHER
 #define CONFIG_USB_ETHER_ASIX
@@ -161,9 +153,7 @@
 #define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS		0
 /* Gadget part */
-#define CONFIG_CI_UDC
 #define CONFIG_USBD_HS
-#define CONFIG_USB_GADGET_DUALSPEED
 #define CONFIG_USB_ETHER
 #define CONFIG_USB_ETH_CDC
 #define CONFIG_NETCONSOLE
@@ -187,6 +177,7 @@
 #endif
 
 /* Extra U-Boot environment. */
+#ifndef CONFIG_SPL_BUILD
 #define CONFIG_EXTRA_ENV_SETTINGS					\
 	"fdt_high=0xffffffff\0"						\
 	"initrd_high=0xffffffff\0"					\
@@ -195,7 +186,12 @@
 	"bootdev=/dev/mmcblk0p1\0"					\
 	"rootdev=/dev/mmcblk0p2\0"					\
 	"netdev=eth0\0"							\
-	"kernel_addr_r=0x18000000\0"					\
+	"kernel_addr_r="__stringify(CONFIG_LOADADDR)"\0"		\
+	"pxefile_addr_r="__stringify(CONFIG_LOADADDR)"\0"		\
+	"scriptaddr="__stringify(CONFIG_LOADADDR)"\0"			\
+	"ramdisk_addr_r=0x28000000\0"		   			\
+	"fdt_addr_r=0x18000000\0"					\
+	"fdtfile=imx6q-novena.dtb\0"					\
 	"addcons="							\
 		"setenv bootargs ${bootargs} "				\
 		"console=${consdev},${baudrate}\0"			\
@@ -239,5 +235,19 @@
 		"fatwrite mmc 0:1 ${loadaddr} u-boot.img ${filesize} ; "\
 		"fi ; "							\
 		"fi\0"							\
+	BOOTENV
+
+#define BOOT_TARGET_DEVICES(func) \
+	func(MMC, mmc, 0) \
+	func(USB, usb, 0) \
+	func(SATA, sata, 0) \
+	func(PXE, pxe, na) \
+	func(DHCP, dhcp, na)
+
+#include <config_distro_bootcmd.h>
+
+#else
+#define CONFIG_EXTRA_ENV_SETTINGS
+#endif /* CONFIG_SPL_BUILD */
 
 #endif				/* __CONFIG_H */