X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fomap1610h2.h;h=c6ca689a5fe04aee8960e834b43d843c719a3a90;hb=d9f2f5008c32c8373d68a4c8e14f50a469965a23;hp=e512f912a922afddcbba9704d2d5783598bd6981;hpb=855a496fe9ba431772f1ff1aef21a5c001288bb0;p=u-boot

diff --git a/include/configs/omap1610h2.h b/include/configs/omap1610h2.h
index e512f912a9..c6ca689a5f 100644
--- a/include/configs/omap1610h2.h
+++ b/include/configs/omap1610h2.h
@@ -26,12 +26,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-/*
- * If we are developing, we might want to start armboot from ram
- * so we MUST NOT initialize critical regs like mem-timing ...
- */
-#define CONFIG_INIT_CRITICAL            /* undef for developing */
-
 /*
  * High Level Configuration Options
  * (easy to change)
@@ -40,6 +34,7 @@
 #define CONFIG_OMAP		1	/* in a TI OMAP core */
 #define CONFIG_OMAP1610		1	/* which is in a 1610 */
 #define CONFIG_H2_OMAP1610	1	/* on an H2 Board */
+#define CONFIG_MACH_OMAP_H2		/* Select board mach-type */
 
 /* input clock of PLL */
 /* the OMAP1610 H2 has 12MHz input clock */
@@ -51,6 +46,7 @@
 
 #define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs */
 #define CONFIG_SETUP_MEMORY_TAGS	1
+#define CONFIG_INITRD_TAG		1
 
 /*
  * Size of malloc() pool
@@ -93,8 +89,7 @@
 #include <configs/omap1510.h>
 
 #define CONFIG_BOOTDELAY	3
-#define CONFIG_BOOTARGS	"mem=32M console=ttyS0,115200n8 noinitrd \
-				root=/dev/nfs ip=dhcp"
+#define CONFIG_BOOTARGS	"console=ttyS0,115200n8 noinitrd root=/dev/nfs ip=dhcp"
 #define CONFIG_BOOTCOMMAND      "bootp;tftp;bootm"
 #define CFG_AUTOLOAD            "n"             /* No autoload */
 
@@ -142,18 +137,29 @@
 /*-----------------------------------------------------------------------
  * Physical Memory Map
  */
-#define CONFIG_NR_DRAM_BANKS	1	/* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1	0x10000000	/* SDRAM Bank #1 */
+#define CONFIG_NR_DRAM_BANKS	1		/* we have 1 bank of DRAM */
+#define PHYS_SDRAM_1		0x10000000	/* SDRAM Bank #1 */
 #define PHYS_SDRAM_1_SIZE	0x02000000	/* 32 MB */
 
-#ifdef CONFIG_CS0_BOOT
-#define PHYS_FLASH_1	0x0C000000
-#endif
-#ifdef CONFIG_CS3_BOOT
-#define PHYS_FLASH_1	0x00000000
+#define PHYS_FLASH_1_BM1	0x00000000	/* Flash Bank #1 if booting from flash */
+#define PHYS_FLASH_1_BM0	0x0C000000	/* Flash Bank #1 if booting from RAM */
+
+#ifdef CONFIG_CS_AUTOBOOT			/* Determine CS assignment in runtime */
+
+#ifndef __ASSEMBLY__
+extern unsigned long omap_flash_base;		/* set in flash__init */
 #endif
+#define CFG_FLASH_BASE		omap_flash_base
 
-#define CFG_FLASH_BASE	PHYS_FLASH_1
+#elif defined(CONFIG_CS0_BOOT)
+
+#define CFG_FLASH_BASE		PHYS_FLASH_1_BM0
+
+#else
+
+#define CFG_FLASH_BASE		PHYS_FLASH_1_BM1
+
+#endif
 
 /*-----------------------------------------------------------------------
  * FLASH and environment organization