X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fomap2420h4.h;h=1abf2590ef4b40d8fbe415eb93988712522dd55f;hb=e5f5c4a977c411c0cd3899a4f9487eea77a0e150;hp=9c1884244e8f553b58ec185474fee222dd18c5fb;hpb=cb32ed1fc298875845f166d326a3f2704a0d5364;p=u-boot

diff --git a/include/configs/omap2420h4.h b/include/configs/omap2420h4.h
index 9c1884244e..1abf2590ef 100644
--- a/include/configs/omap2420h4.h
+++ b/include/configs/omap2420h4.h
@@ -38,6 +38,8 @@
 /*#define CONFIG_APTIX           1    #* define if on APTIX test chip */
 /*#define CONFIG_VIRTIO          1    #* Using Virtio simulator */
 
+#define CONFIG_STANDALONE_LOAD_ADDR	0x80300000
+
 /* Clock config to target*/
 #define PRCM_CONFIG_II	1
 /* #define PRCM_CONFIG_III		1 */
@@ -59,7 +61,6 @@
 /* the OMAP2420 H4 has 12MHz, 13MHz, or 19.2Mhz crystal input */
 #define CONFIG_SYS_CLK_FREQ      V_SCLK
 
-#undef CONFIG_USE_IRQ                 /* no support for IRQs */
 #define CONFIG_MISC_INIT_R
 
 #define CONFIG_CMDLINE_TAG       1    /* enable passing of ATAGs */
@@ -72,7 +73,6 @@
  */
 #define CONFIG_ENV_SIZE             SZ_128K     /* Total Size of Environment Sector */
 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + SZ_128K)
-#define CONFIG_SYS_GBL_DATA_SIZE        128  /* size in bytes reserved for initial data */
 
 /*
  * Hardware drivers
@@ -81,7 +81,7 @@
 /*
  * SMC91c96 Etherent
  */
-#define CONFIG_DRIVER_LAN91C96
+#define CONFIG_LAN91C96
 #define CONFIG_LAN91C96_BASE     (H4_CS1_BASE+0x300)
 #define CONFIG_LAN91C96_EXT_PHY
 
@@ -117,8 +117,6 @@
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_CONS_INDEX        1
 #define CONFIG_BAUDRATE          115200
-#define CONFIG_SYS_BAUDRATE_TABLE       {9600, 19200, 38400, 57600, 115200}
-
 
 /*
  * Command line configuration.
@@ -163,14 +161,12 @@
 /*
  * Miscellaneous configurable options
  */
+#define CONFIG_SYS_LONGHELP             /* undef to save memory */
 #ifdef CONFIG_APTIX
-#define V_PROMPT                 "OMAP2420 Aptix # "
+# define CONFIG_SYS_PROMPT		"OMAP2420 Aptix # "
 #else
-#define V_PROMPT                 "OMAP242x H4 # "
+# define CONFIG_SYS_PROMPT		"OMAP242x H4 # "
 #endif
-
-#define CONFIG_SYS_LONGHELP             /* undef to save memory */
-#define CONFIG_SYS_PROMPT               V_PROMPT
 #define CONFIG_SYS_CBSIZE               256  /* Console I/O Buffer Size */
 /* Print Buffer Size */
 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
@@ -195,17 +191,6 @@
 #define CONFIG_SYS_PTV			V_PTV	/* 2^(PTV+1) */
 #define CONFIG_SYS_HZ			((CONFIG_SYS_CLK_FREQ)/(2 << CONFIG_SYS_PTV))
 
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE         SZ_128K /* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ     SZ_4K   /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ     SZ_4K   /* FIQ stack */
-#endif
-
 /*-----------------------------------------------------------------------
  * Physical Memory Map
  */
@@ -220,6 +205,7 @@
 #define PHYS_FLASH_2             (H4_CS0_BASE+SZ_32M) /* same cs, 2 chips in series */
 #define PHYS_FLASH_SIZE_2        SZ_32M
 
+#define PHYS_SRAM		0x4020F800
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
  */
@@ -271,4 +257,7 @@
 #define MTDPARTS_DEFAULT	"mtdparts=omap2420-1:-(jffs2)"
 */
 
+#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_SP_ADDR 	PHYS_SRAM
+
 #endif							/* __CONFIG_H */