X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fomap3_logic.h;h=7b8f402e14d982660b92dbd46e469bea0ccc59b1;hb=e745782c25aa00fb74801303413fbcc92dc45b35;hp=a7649cabd731e044d84cee73948bfc7a8ab51f34;hpb=79493609c5300be6cc555ab8bd38971360b381f6;p=u-boot diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h index a7649cabd7..7b8f402e14 100644 --- a/include/configs/omap3_logic.h +++ b/include/configs/omap3_logic.h @@ -1,11 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ /* * (C) Copyright 2011 Logic Product Development * Peter Barada * * Configuration settings for the Logic OMAP35x/DM37x SOM LV/Torpedo * reference boards. - * - * SPDX-License-Identifier: GPL-2.0+ */ #ifndef __CONFIG_H @@ -15,21 +14,14 @@ #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ -/* - * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM - * 64 bytes before this address should be set aside for u-boot.img's - * header. That is 0x800FFFC0--0x80100000 should not be used for any - * other needs. We use this rather than the inherited defines from - * ti_armv7_common.h for backwards compatibility. - */ -#define CONFIG_SYS_TEXT_BASE 0x80100000 -#define CONFIG_SPL_BSS_START_ADDR 0x80000000 -#define CONFIG_SPL_BSS_MAX_SIZE (512 << 10) /* 512 KB */ -#define CONFIG_SYS_SPL_MALLOC_START 0x80208000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 - #include +#ifdef CONFIG_SPL_BUILD +/* select serial console configuration for SPL */ +#define CONFIG_SYS_NS16550_COM1 OMAP34XX_UART1 +#endif + + /* * We are only ever GP parts and will utilize all of the "downloaded image" * area in SRAM which starts at 0x40200000 and ends at 0x4020FFFF (64KB) in @@ -38,66 +30,23 @@ #undef CONFIG_SPL_TEXT_BASE #define CONFIG_SPL_TEXT_BASE 0x40200000 -#define CONFIG_BOARD_LATE_INIT #define CONFIG_MISC_INIT_R /* misc_init_r dumps the die id */ #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG #define CONFIG_REVISION_TAG -#define CONFIG_CMDLINE_EDITING /* cmd line edit/history */ /* Hardware drivers */ -/* GPIO banks */ -#define CONFIG_OMAP3_GPIO_6 /* GPIO160..191 is in GPIO bank 6 */ - -#define CONFIG_USB_OMAP3 - -/* select serial console configuration */ -#undef CONFIG_CONS_INDEX -#define CONFIG_CONS_INDEX 1 -#define CONFIG_SYS_NS16550_COM1 OMAP34XX_UART1 -#define CONFIG_SERIAL1 1 /* UART1 on OMAP Logic boards */ - -/* commands to include */ -#define CONFIG_CMD_NAND -#define CONFIG_CMD_MTDPARTS -#define CONFIG_CMD_NAND_LOCK_UNLOCK /* nand (un)lock commands */ - /* I2C */ -#define CONFIG_SYS_I2C_OMAP34XX #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM AT24C64 */ -#define EXPANSION_EEPROM_I2C_BUS 2 /* I2C Bus for AT24C64 */ -#define CONFIG_OMAP3_LOGIC_USE_NEW_PRODUCT_ID - -/* USB */ -#define CONFIG_USB_MUSB_OMAP2PLUS -#define CONFIG_USB_MUSB_PIO_ONLY -#define CONFIG_USB_ETHER -#define CONFIG_USB_ETHER_RNDIS -#define CONFIG_USB_FUNCTION_FASTBOOT -#define CONFIG_CMD_FASTBOOT -#define CONFIG_ANDROID_BOOT_IMAGE -#define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR -#define CONFIG_FASTBOOT_BUF_SIZE 0x07000000 - -/* TWL4030 */ -#define CONFIG_TWL4030_PWM -#define CONFIG_TWL4030_USB /* Board NAND Info. */ #ifdef CONFIG_NAND -#define CONFIG_NAND_OMAP_GPMC - -#define CONFIG_CMD_UBIFS /* Read-only UBI volume operations */ -#define CONFIG_RBTREE /* required by CONFIG_CMD_UBI */ -#define CONFIG_LZO /* required by CONFIG_CMD_UBIFS */ - #define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ /* to access nand */ #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of */ /* NAND devices */ -#define CONFIG_SYS_NAND_BUSWIDTH_16BIT #define CONFIG_SYS_NAND_5_ADDR_CYCLE #define CONFIG_SYS_NAND_PAGE_COUNT 64 #define CONFIG_SYS_NAND_PAGE_SIZE 2048 @@ -114,51 +63,22 @@ #define CONFIG_SYS_NAND_ECCSIZE 512 #define CONFIG_SYS_NAND_ECCBYTES 13 #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW_DETECTION_SW -#define CONFIG_BCH #define CONFIG_SYS_NAND_MAX_OOBFREE 2 #define CONFIG_SYS_NAND_MAX_ECCPOS 56 -#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ #define CONFIG_MTD_PARTITIONS /* required for UBI partition support */ -#define MTDIDS_DEFAULT "nand0=omap2-nand.0" -#define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:512k(MLO),"\ - "1920k(u-boot),128k(u-boot-env),"\ - "4m(kernel),-(fs)" #endif /* Environment information */ -/* - * PREBOOT assumes the 4.3" display is attached. User can interrupt - * and modify display variable to suit their needs. - */ #define CONFIG_PREBOOT \ - "echo ======================NOTICE============================;"\ - "echo \"The u-boot environment is not set.\";" \ - "echo \"If using a display a valid display variable for your panel\";" \ - "echo \"needs to be set.\";" \ - "echo \"Valid display options are:\";" \ - "echo \" 2 == LQ121S1DG31 TFT SVGA (12.1) Sharp\";" \ - "echo \" 3 == LQ036Q1DA01 TFT QVGA (3.6) Sharp w/ASIC\";" \ - "echo \" 5 == LQ064D343 TFT VGA (6.4) Sharp\";" \ - "echo \" 7 == LQ10D368 TFT VGA (10.4) Sharp\";" \ - "echo \" 15 == LQ043T1DG01 TFT WQVGA (4.3) Sharp (DEFAULT)\";" \ - "echo \" vga[-dvi or -hdmi] LCD VGA 640x480\";" \ - "echo \" svga[-dvi or -hdmi] LCD SVGA 800x600\";" \ - "echo \" xga[-dvi or -hdmi] LCD XGA 1024x768\";" \ - "echo \" 720p[-dvi or -hdmi] LCD 720P 1280x720\";" \ - "echo \"Defaulting to 4.3 LCD panel (display=15).\";" \ - "setenv display 15;" \ "setenv preboot;" \ - "nand unlock;" \ "saveenv;" #define CONFIG_EXTRA_ENV_SETTINGS \ - "loadaddr=0x81000000\0" \ - "uimage=uImage\0" \ - "zimage=zImage\0" \ - "mtdids=" MTDIDS_DEFAULT "\0" \ - "mtdparts=" MTDPARTS_DEFAULT "\0" \ + DEFAULT_LINUX_BOOT_ENV \ + "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \ + "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ "mmcdev=0\0" \ "mmcroot=/dev/mmcblk0p2 rw\0" \ "mmcrootfstype=ext4 rootwait\0" \ @@ -172,8 +92,7 @@ "fi; " \ "else run defaultboot; fi\0" \ "defaultboot=run mmcramboot\0" \ - "consoledevice=ttyO0\0" \ - "display=15\0" \ + "consoledevice=ttyS0\0" \ "setconsole=setenv console ${consoledevice},${baudrate}n8\0" \ "dump_bootargs=echo 'Bootargs: '; echo $bootargs\0" \ "rotation=0\0" \ @@ -182,71 +101,90 @@ "omapfb.rotate=${rotation}; " \ "fi\0" \ "optargs=ignore_loglevel early_printk no_console_suspend\0" \ - "addmtdparts=setenv bootargs ${bootargs} ${mtdparts}\0" \ - "common_bootargs=setenv bootargs ${bootargs} display=${display} " \ - "${optargs};" \ - "run addmtdparts; " \ + "common_bootargs=run setconsole; setenv bootargs " \ + "${bootargs} "\ + "console=${console} " \ + "${mtdparts} "\ + "${optargs}; " \ "run vrfb_arg\0" \ - "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \ + "loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \ "bootscript=echo 'Running bootscript from mmc ...'; " \ "source ${loadaddr}\0" \ - "loaduimage=mmc rescan; " \ - "fatload mmc ${mmcdev} ${loadaddr} ${uimage}\0" \ - "loadzimage=mmc rescan; " \ - "fatload mmc ${mmcdev} ${loadaddr} ${zimage}\0" \ + "loadimage=mmc rescan; " \ + "load mmc ${mmcdev} ${loadaddr} ${bootfile}\0" \ "ramdisksize=64000\0" \ - "ramdiskaddr=0x82000000\0" \ "ramdiskimage=rootfs.ext2.gz.uboot\0" \ "loadramdisk=mmc rescan; " \ - "fatload mmc ${mmcdev} ${ramdiskaddr} ${ramdiskimage}\0" \ - "ramargs=run setconsole; setenv bootargs console=${console} " \ + "load mmc ${mmcdev} ${rdaddr} ${ramdiskimage}\0" \ + "ramargs=setenv bootargs "\ "root=/dev/ram rw ramdisk_size=${ramdisksize}\0" \ - "mmcargs=run setconsole; setenv bootargs console=${console} " \ - "${optargs} " \ - "root=${mmcroot} " \ - "rootfstype=${mmcrootfstype}\0" \ - "nandargs=run setconsole; setenv bootargs console=${console} " \ - "${optargs} " \ + "mmcargs=setenv bootargs "\ + "root=${mmcroot} rootfstype=${mmcrootfstype}\0" \ + "nandargs=setenv bootargs "\ "root=${nandroot} " \ "rootfstype=${nandrootfstype}\0" \ - "fdtaddr=0x86000000\0" \ - "loadfdtimage=mmc rescan; " \ - "fatload mmc ${mmcdev} ${fdtaddr} ${fdtimage}\0" \ - "mmcbootz=echo Booting with DT from mmc${mmcdev} ...; " \ + "nfsargs=setenv serverip ${tftpserver}; " \ + "setenv bootargs root=/dev/nfs " \ + "nfsroot=${nfsrootpath} " \ + "ip=${ipaddr}:${tftpserver}:${gatewayip}:${netmask}::eth0:off\0" \ + "nfsrootpath=/opt/nfs-exports/omap\0" \ + "autoload=no\0" \ + "loadfdt=mmc rescan; " \ + "load mmc ${mmcdev} ${fdtaddr} ${fdtimage}\0" \ + "mmcbootcommon=echo Booting with DT from mmc${mmcdev} ...; " \ "run mmcargs; " \ "run common_bootargs; " \ "run dump_bootargs; " \ - "run loadzimage; " \ - "run loadfdtimage; " \ + "run loadimage; " \ + "run loadfdt;\0 " \ + "mmcbootz=setenv bootfile zImage; " \ + "run mmcbootcommon; "\ "bootz ${loadaddr} - ${fdtaddr}\0" \ - "mmcramboot=echo 'Booting uImage kernel from mmc w/ramdisk...'; " \ + "mmcboot=setenv bootfile uImage; "\ + "run mmcbootcommon; "\ + "bootm ${loadaddr} - ${fdtaddr}\0" \ + "mmcrambootcommon=echo 'Booting kernel from MMC w/ramdisk...'; " \ "run ramargs; " \ "run common_bootargs; " \ "run dump_bootargs; " \ - "run loaduimage; " \ - "run loadramdisk; " \ - "bootm ${loadaddr} ${ramdiskaddr}\0" \ - "mmcrambootz=echo 'Booting zImage kernel from mmc w/ramdisk...'; " \ - "run ramargs; " \ - "run common_bootargs; " \ - "run dump_bootargs; " \ - "run loadzimage; " \ - "run loadramdisk; " \ - "run loadfdtimage; " \ - "bootz ${loadaddr} ${ramdiskaddr} ${fdtaddr}\0; " \ + "run loadimage; " \ + "run loadfdt; " \ + "run loadramdisk\0" \ + "mmcramboot=setenv bootfile uImage; " \ + "run mmcrambootcommon; " \ + "bootm ${loadaddr} ${rdaddr} ${fdtaddr}\0" \ + "mmcrambootz=setenv bootfile zImage; " \ + "run mmcrambootcommon; " \ + "bootz ${loadaddr} ${rdaddr} ${fdtaddr}\0" \ "tftpboot=echo 'Booting kernel/ramdisk rootfs from tftp...'; " \ "run ramargs; " \ "run common_bootargs; " \ "run dump_bootargs; " \ - "tftpboot ${loadaddr} ${uimage}; " \ - "tftpboot ${ramdiskaddr} ${ramdiskimage}; " \ - "bootm ${loadaddr} ${ramdiskaddr}\0" + "tftpboot ${loadaddr} ${zimage}; " \ + "tftpboot ${rdaddr} ${ramdiskimage}; " \ + "bootm ${loadaddr} ${rdaddr}\0" \ + "tftpbootz=echo 'Booting kernel NFS rootfs...'; " \ + "dhcp;" \ + "run nfsargs;" \ + "run common_bootargs;" \ + "run dump_bootargs;" \ + "tftpboot $loadaddr zImage;" \ + "bootz $loadaddr\0" \ + "nandbootcommon=echo 'Booting kernel from NAND...';" \ + "run nandargs;" \ + "run common_bootargs;" \ + "run dump_bootargs;" \ + "nand read ${loadaddr} kernel;" \ + "nand read ${fdtaddr} spl-os;\0" \ + "nandbootz=run nandbootcommon; "\ + "bootz ${loadaddr} - ${fdtaddr}\0"\ + "nandboot=run nandbootcommon; "\ + "bootm ${loadaddr} - ${fdtaddr}\0"\ #define CONFIG_BOOTCOMMAND \ "run autoboot" /* Miscellaneous configurable options */ -#define CONFIG_AUTO_COMPLETE /* memtest works on */ #define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) @@ -258,38 +196,22 @@ /* **** PISMO SUPPORT *** */ #if defined(CONFIG_CMD_NAND) #define CONFIG_SYS_FLASH_BASE NAND_BASE -#elif defined(CONFIG_CMD_ONENAND) -#define CONFIG_SYS_FLASH_BASE ONENAND_MAP #endif /* Monitor at start of flash */ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_ENV_IS_IN_NAND 1 #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ -#define ONENAND_ENV_OFFSET 0x260000 /* environment starts here */ -#define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */ #define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ -#define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET -#define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET - -/* SMSC922x Ethernet */ -#if defined(CONFIG_CMD_NET) -#define CONFIG_SMC911X -#define CONFIG_SMC911X_32_BIT -#define CONFIG_SMC911X_BASE 0x08000000 -#endif /* (CONFIG_CMD_NET) */ +#define CONFIG_ENV_OFFSET 0x260000 +#define CONFIG_ENV_ADDR 0x260000 /* Defines for SPL */ -#define CONFIG_SPL_OMAP3_ID_NAND - /* NAND: SPL falcon mode configs */ #ifdef CONFIG_SPL_OS_BOOT -#define CONFIG_CMD_SPL_NAND_OFS 0x240000 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000 -#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000 #endif #endif /* __CONFIG_H */