X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fomap3_zoom1.h;h=f7d06521e39fe4b50a605eafcfb9b8ad75e1ffed;hb=7b89795f17c990263a17ecf25e447df16e379748;hp=61a41e7255035505086e68ba2303c61807431840;hpb=97a099eaa48d5c762c4f73c52c3090c513b8b877;p=u-boot diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h index 61a41e7255..f7d06521e3 100644 --- a/include/configs/omap3_zoom1.h +++ b/include/configs/omap3_zoom1.h @@ -28,17 +28,18 @@ #ifndef __CONFIG_H #define __CONFIG_H -#include /* * High Level Configuration Options */ -#define CONFIG_ARMCORTEXA8 1 /* This is an ARM V7 CPU core */ +#define CONFIG_ARMV7 1 /* This is an ARM V7 CPU core */ #define CONFIG_OMAP 1 /* in a TI OMAP core */ #define CONFIG_OMAP34XX 1 /* which is a 34XX */ #define CONFIG_OMAP3430 1 /* which is in a 3430 */ #define CONFIG_OMAP3_ZOOM1 1 /* working with Zoom MDK Rev1 */ +#define CONFIG_SDRC /* The chip has SDRC controller */ + #include /* get chip and board defs */ #include @@ -63,10 +64,9 @@ /* * Size of malloc() pool */ -#define CONFIG_ENV_SIZE SZ_128K /* Total Size Environment */ +#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ /* Sector */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_128K) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10)) /* initial data */ /* @@ -99,6 +99,24 @@ #define CONFIG_OMAP3_MMC 1 #define CONFIG_DOS_PARTITION 1 +/* DDR - I use Micron DDR */ +#define CONFIG_OMAP3_MICRON_DDR 1 + +/* USB */ +#define CONFIG_MUSB_UDC 1 +#define CONFIG_USB_OMAP3 1 +#define CONFIG_TWL4030_USB 1 + +/* USB device configuration */ +#define CONFIG_USB_DEVICE 1 +#define CONFIG_USB_TTY 1 +#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 +/* Change these to suit your needs */ +#define CONFIG_USBD_VENDORID 0x0451 +#define CONFIG_USBD_PRODUCTID 0x5678 +#define CONFIG_USBD_MANUFACTURER "Texas Instruments" +#define CONFIG_USBD_PRODUCT_NAME "Zoom1" + /* commands to include */ #include @@ -119,6 +137,7 @@ #undef CONFIG_CMD_NFS /* NFS support */ #define CONFIG_SYS_NO_FLASH +#define CONFIG_HARD_I2C 1 #define CONFIG_SYS_I2C_SPEED 100000 #define CONFIG_SYS_I2C_SLAVE 1 #define CONFIG_SYS_I2C_BUS 0 @@ -144,9 +163,6 @@ #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ /* devices */ - -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ - #define CONFIG_JFFS2_NAND /* nand device jffs2 lives on */ #define CONFIG_JFFS2_DEV "nand0" @@ -160,6 +176,7 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ "loadaddr=0x82000000\0" \ + "usbtty=cdc_acm\0" \ "console=ttyS2,115200n8\0" \ "videomode=1024x768@60,vxres=1024,vyres=768\0" \ "videospec=omapfb:vram:2M,vram:4M\0" \ @@ -199,12 +216,10 @@ /* * Miscellaneous configurable options */ -#define V_PROMPT "OMAP3 Zoom1# " - #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " -#define CONFIG_SYS_PROMPT V_PROMPT +#define CONFIG_SYS_PROMPT "OMAP3 Zoom1 # " #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ @@ -221,6 +236,12 @@ #define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default */ /* load address */ +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 +#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 +#define CONFIG_SYS_INIT_RAM_SIZE 0x800 +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_SIZE - \ + GENERATED_GBL_DATA_SIZE) /* * OMAP3 has 12 GP timers, they can be driven by the system clock * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). @@ -235,10 +256,10 @@ * * The stack sizes are set up in start.S using the settings below */ -#define CONFIG_STACKSIZE SZ_128K /* regular stack */ +#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ #ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ SZ_4K /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ SZ_4K /* FIQ stack */ +#define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack 4 KiB */ +#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack 4 KiB */ #endif /*----------------------------------------------------------------------- @@ -246,7 +267,7 @@ */ #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 -#define PHYS_SDRAM_1_SIZE SZ_32M /* at least 32 meg */ +#define PHYS_SDRAM_1_SIZE (32 << 20) /* at least 32 MiB */ #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 /* SDRAM Bank Allocation method */ @@ -262,10 +283,7 @@ #define PISMO1_NAND_SIZE GPMC_SIZE_128M #define PISMO1_ONEN_SIZE GPMC_SIZE_128M -#define CONFIG_SYS_MAX_FLASH_SECT 520 /* max number of sectors on */ - /* one chip */ -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */ -#define CONFIG_SYS_MONITOR_LEN SZ_256K /* Reserve 2 sectors */ +#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ #define CONFIG_SYS_FLASH_BASE boot_flash_base @@ -281,23 +299,7 @@ #define CONFIG_ENV_OFFSET boot_flash_off #define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET -/*----------------------------------------------------------------------- - * CFI FLASH driver setup - */ -/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (100 * CONFIG_SYS_HZ) -#define CONFIG_SYS_FLASH_WRITE_TOUT (100 * CONFIG_SYS_HZ) - -/* Flash banks JFFS2 should use */ -#define CONFIG_SYS_MAX_MTD_BANKS (CONFIG_SYS_MAX_FLASH_BANKS + \ - CONFIG_SYS_MAX_NAND_DEVICE) -#define CONFIG_SYS_JFFS2_MEM_NAND -/* use flash_info[2] */ -#define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS -#define CONFIG_SYS_JFFS2_NUM_BANKS 1 - #ifndef __ASSEMBLY__ -extern struct gpmc *gpmc_cfg; extern unsigned int boot_flash_base; extern volatile unsigned int boot_flash_env_addr; extern unsigned int boot_flash_off;