X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fomap5_evm.h;h=623da777faa7a66b346981554fe18c4fca4c0bc9;hb=e5f5c4a977c411c0cd3899a4f9487eea77a0e150;hp=6c91ee884e8102a0ca8e94648a2957b482e8a518;hpb=328aecaf3dbca4eea31632a5bfddf38b63204227;p=u-boot

diff --git a/include/configs/omap5_evm.h b/include/configs/omap5_evm.h
index 6c91ee884e..623da777fa 100644
--- a/include/configs/omap5_evm.h
+++ b/include/configs/omap5_evm.h
@@ -38,7 +38,7 @@
 #define CONFIG_OMAP54XX	/* which is a 54XX */
 #define CONFIG_OMAP5430	/* which is in a 5430 */
 #define CONFIG_5430EVM	/* working with EVM */
-#define CONFIG_ARCH_CPU_INIT
+#define CONFIG_OMAP_GPIO
 
 /* Get CPU defs */
 #include <asm/arch/cpu.h>
@@ -51,10 +51,7 @@
 /* Clock Defines */
 #define V_OSCK			19200000	/* Clock output from T2 */
 #define V_SCLK	V_OSCK
-#define CONFIG_SYS_CLOCKS_ENABLE_ALL	1	/* Enable all clocks */
-#define CONFIG_SYS_ENABLE_PADS_ALL	1	/* Enable all PADS for now */
 
-#undef CONFIG_USE_IRQ	/* no support for IRQs */
 #define CONFIG_MISC_INIT_R
 
 #define CONFIG_OF_LIBFDT
@@ -170,7 +167,7 @@
 		"bootm ${loadaddr}\0" \
 
 #define CONFIG_BOOTCOMMAND \
-	"if mmc rescan ${mmcdev}; then " \
+	"mmc dev ${mmcdev}; if mmc rescan; then " \
 		"if run loadbootscript; then " \
 			"run bootscript; " \
 		"else " \
@@ -188,7 +185,6 @@
 
 #define CONFIG_SYS_LONGHELP	/* undef to save memory */
 #define CONFIG_SYS_HUSH_PARSER	/* use "hush" command parser */
-#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #define CONFIG_SYS_PROMPT		"OMAP5430 EVM # "
 #define CONFIG_SYS_CBSIZE		256
 /* Print Buffer Size */
@@ -212,17 +208,6 @@
 #define CONFIG_SYS_PTV			2	/* Divisor: 2^(PTV+1) => 8 */
 #define CONFIG_SYS_HZ			1000
 
-/*
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE	(128 << 10)	/* Regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ	(4 << 10)	/* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ	(4 << 10)	/* FIQ stack */
-#endif
-
 /*
  * SDRAM Memory Map
  * Even though we use two CS all the memory
@@ -231,10 +216,7 @@
 #define CONFIG_NR_DRAM_BANKS	1
 
 #define CONFIG_SYS_SDRAM_BASE		0x80000000
-#define CONFIG_SYS_INIT_RAM_ADDR	0x4030D800
-#define CONFIG_SYS_INIT_RAM_SIZE	0x800
-#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + \
-					 CONFIG_SYS_INIT_RAM_SIZE - \
+#define CONFIG_SYS_INIT_SP_ADDR         (NON_SECURE_SRAM_END - \
 					 GENERATED_GBL_DATA_SIZE)
 
 #define CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
@@ -247,9 +229,11 @@
 
 /* Defines for SPL */
 #define CONFIG_SPL
+#define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_TEXT_BASE		0x40300350
 #define CONFIG_SPL_MAX_SIZE		0x19000	/* 100K */
-#define CONFIG_SPL_STACK		LOW_LEVEL_SRAM_STACK
+#define CONFIG_SPL_STACK		CONFIG_SYS_INIT_SP_ADDR
+#define CONFIG_SPL_DISPLAY_PRINT
 
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x300 /* address 0x60000 */
 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	0x200 /* 256 KB */
@@ -263,7 +247,7 @@
 #define CONFIG_SPL_FAT_SUPPORT
 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 #define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/omap-common/u-boot-spl.lds"
+#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
 
 /*
  * 64 bytes before this address should be set aside for u-boot.img's