X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fomap5_uevm.h;h=e07795f9210c627ff2480854d69282ca67550581;hb=7a7ffedabd29adde9cb6ebe6066256c4cf8b77af;hp=47568e95c0590f8ab620c45e207f205069d400f4;hpb=fdce7b633a1de24456226b18527cc7900c34282a;p=u-boot

diff --git a/include/configs/omap5_uevm.h b/include/configs/omap5_uevm.h
index 47568e95c0..e07795f921 100644
--- a/include/configs/omap5_uevm.h
+++ b/include/configs/omap5_uevm.h
@@ -4,9 +4,9 @@
  * Sricharan R	  <r.sricharan@ti.com>
  *
  * Configuration settings for the TI EVM5430 board.
- * See omap5_common.h for omap5 common settings.
+ * See ti_omap5_common.h for omap5 common settings.
  *
- * SPDX-License-Identifier:	GPL-2.0+ 
+ * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_OMAP5_EVM_H
@@ -17,15 +17,17 @@
 	"uuid_disk=${uuid_gpt_disk};" \
 	"name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}"
 
-#include <configs/omap5_common.h>
+#include <configs/ti_omap5_common.h>
 
 #define CONFIG_CONS_INDEX		3
 #define CONFIG_SYS_NS16550_COM3		UART3_BASE
 #define CONFIG_BAUDRATE			115200
 
+#define CONFIG_MISC_INIT_R
 /* MMC ENV related defines */
 #define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_SYS_MMC_ENV_DEV		1	/* SLOT2: eMMC(1) */
+#define CONFIG_ENV_SIZE			(128 << 10)
 #define CONFIG_ENV_OFFSET		0xE0000
 #define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
@@ -36,15 +38,48 @@
 #define CONFIG_EFI_PARTITION
 #define CONFIG_PARTITION_UUIDS
 #define CONFIG_CMD_PART
+#define CONFIG_HSMMC2_8BIT
+#define CONFIG_SUPPORT_EMMC_BOOT
 
+/* Required support for the TCA642X GPIO we have on the uEVM */
 #define CONFIG_TCA642X
 #define CONFIG_CMD_TCA642X
 #define CONFIG_SYS_I2C_TCA642X_BUS_NUM 4
 #define CONFIG_SYS_I2C_TCA642X_ADDR 0x22
 
-#define CONFIG_SYS_PROMPT		"OMAP5432 uEVM # "
+/* USB UHH support options */
+#define CONFIG_CMD_USB
+#define CONFIG_USB_HOST
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_OMAP
+#define CONFIG_USB_STORAGE
+#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
+
+#define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 80
+#define CONFIG_OMAP_EHCI_PHY3_RESET_GPIO 79
+
+/* Enabled commands */
+#define CONFIG_CMD_DHCP		/* DHCP Support			*/
+#define CONFIG_CMD_NET		/* bootp, tftpboot, rarpboot	*/
+#define CONFIG_CMD_NFS		/* NFS support			*/
+
+/* USB Networking options */
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_SMSC95XX
 
 #define CONSOLEDEV		"ttyO2"
 
+/* Max time to hold reset on this board, see doc/README.omap-reset-time */
 #define CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC	16296
+
+#define CONFIG_CMD_SCSI
+#define CONFIG_LIBATA
+#define CONFIG_SCSI_AHCI
+#define CONFIG_SCSI_AHCI_PLAT
+#define CONFIG_SYS_SCSI_MAX_SCSI_ID	1
+#define CONFIG_SYS_SCSI_MAX_LUN		1
+#define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
+						CONFIG_SYS_SCSI_MAX_LUN)
+
 #endif /* __CONFIG_OMAP5_EVM_H */