X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fp3p440.h;h=d7b1ca203a693445970217ee41656e557f3e220e;hb=0a7bec7f991950da90c6ee6bc59f322abebccbb7;hp=6edf91ecc67acd731b245a6803de684283f9da51;hpb=2e6e1772c0e34871769be4aef79748fe3e47d953;p=u-boot

diff --git a/include/configs/p3p440.h b/include/configs/p3p440.h
index 6edf91ecc6..d7b1ca203a 100644
--- a/include/configs/p3p440.h
+++ b/include/configs/p3p440.h
@@ -39,6 +39,9 @@
 #define CONFIG_4xx		1	    /* ... PPC4xx family	*/
 #define CONFIG_BOARD_EARLY_INIT_F 1	    /* Call board_early_init_f	*/
 #define CONFIG_MISC_INIT_R	1	    /* Call misc_init_r		*/
+
+#define	CONFIG_SYS_TEXT_BASE	0xFFFC0000
+
 #define CONFIG_SYS_CLK_FREQ	33333333    /* external freq to pll	*/
 
 /*-----------------------------------------------------------------------
@@ -58,10 +61,9 @@
  * Initial RAM & stack pointer (placed in internal SRAM)
  *----------------------------------------------------------------------*/
 #define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_ISRAM_BASE  /* Initial RAM address	*/
-#define CONFIG_SYS_INIT_RAM_END	0x2000	    /* End of used area in RAM	*/
-#define CONFIG_SYS_GBL_DATA_SIZE	128	    /* num bytes initial data	*/
+#define CONFIG_SYS_INIT_RAM_SIZE	0x2000	    /* Size of used area in RAM	*/
 
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 #define CONFIG_SYS_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Mon*/
@@ -169,7 +171,6 @@
 #define CONFIG_PHY_ADDR		0x1c	/* PHY address			*/
 #define CONFIG_HAS_ETH1
 #define CONFIG_PHY1_ADDR	0x1d	/* EMAC1 PHY address		*/
-#define CONFIG_NET_MULTI	1
 #define CONFIG_SYS_RX_ETH_BUFFER	32	/* Number of ethernet rx buffers & descriptors */
 
 #define CONFIG_NETCONSOLE		/* include NetConsole support	*/
@@ -318,14 +319,6 @@
  */
 #define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */