X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fpm9261.h;h=ecc72b72d48f7174baee8b113aa82885f8d9fbc3;hb=30372965d3d5d42258ebc39d7d06522b4c18472a;hp=7fcc9babdc89549c951d06fe05fcf546335d3282;hpb=3388db2cd72d85717596158131b3e48efe2acfea;p=u-boot

diff --git a/include/configs/pm9261.h b/include/configs/pm9261.h
index 7fcc9babdc..ecc72b72d4 100644
--- a/include/configs/pm9261.h
+++ b/include/configs/pm9261.h
@@ -1,6 +1,6 @@
 /*
  * (C) Copyright 2007-2008
- * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Stelian Pop <stelian@popies.net>
  * Lead Tech Design <www.leadtechdesign.com>
  * Ilko Iliev <www.ronetix.at>
  *
@@ -28,23 +28,31 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+/*
+ * SoC must be defined first, before hardware.h is included.
+ * In this case SoC is defined in boards.cfg.
+ */
+
+#include <asm/hardware.h>
 /* ARM asynchronous clock */
-#define CONFIG_SYS_AT91_CPU_NAME	"AT91SAM9261"
 
 #define CONFIG_DISPLAY_BOARDINFO
 
 #define MASTER_PLL_DIV		15
 #define MASTER_PLL_MUL		162
 #define MAIN_PLL_DIV		2
+#define CONFIG_SYS_AT91_SLOW_CLOCK	32768		/* slow clock xtal */
 #define CONFIG_SYS_AT91_MAIN_CLOCK	18432000
 
 #define CONFIG_SYS_HZ		1000
 
-#define CONFIG_ARM926EJS	1	/* This is an ARM926EJS Core	*/
-#define CONFIG_AT91SAM9261	1	/* It's an Atmel AT91SAM9261 SoC*/
+#define CONFIG_SYS_AT91_CPU_NAME	"AT91SAM9261"
 #define CONFIG_PM9261		1	/* on a Ronetix PM9261 Board	*/
 #define CONFIG_ARCH_CPU_INIT
-#undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff	*/
+#define CONFIG_SYS_TEXT_BASE	0
+
+#define MACH_TYPE_PM9261	1187
+#define CONFIG_MACH_TYPE	MACH_TYPE_PM9261
 
 /* clocks */
 /* CKGR_MOR - enable main osc. */
@@ -152,16 +160,15 @@
 #define CONFIG_INITRD_TAG	1
 
 #undef CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_BOARD_EARLY_INIT_F
 
 /*
  * Hardware drivers
  */
 #define CONFIG_AT91_GPIO	1
 #define CONFIG_ATMEL_USART	1
-#undef CONFIG_USART0
-#undef CONFIG_USART1
-#undef CONFIG_USART2
-#define CONFIG_USART3		1	/* USART 3 is DBGU */
+#define CONFIG_USART_BASE		ATMEL_BASE_DBGU
+#define	CONFIG_USART_ID			ATMEL_ID_SYS
 
 /* LCD */
 #define CONFIG_LCD			1
@@ -201,6 +208,7 @@
 #undef CONFIG_CMD_LOADS
 #undef CONFIG_CMD_IMLS
 
+#define CONFIG_CMD_CACHE
 #define CONFIG_CMD_PING		1
 #define CONFIG_CMD_DHCP		1
 #define CONFIG_CMD_NAND		1
@@ -224,7 +232,6 @@
 
 /* NAND flash */
 #define CONFIG_NAND_ATMEL
-#define NAND_MAX_CHIPS				1
 #define CONFIG_SYS_MAX_NAND_DEVICE		1
 #define CONFIG_SYS_NAND_BASE			0x40000000
 #define CONFIG_SYS_NAND_DBW_8			1
@@ -251,7 +258,6 @@
 #define CONFIG_DM9000_USE_16BIT			1
 #define CONFIG_NET_RETRY_COUNT			20
 #define CONFIG_RESET_PHY_R			1
-#define CONFIG_NET_MULTI
 
 /* USB */
 #define CONFIG_USB_ATMEL
@@ -354,7 +360,6 @@
 #endif
 
 #define CONFIG_BAUDRATE			115200
-#define CONFIG_SYS_BAUDRATE_TABLE	{115200 , 19200, 38400, 57600, 9600 }
 
 #define CONFIG_SYS_PROMPT		"pm9261> "
 #define CONFIG_SYS_CBSIZE		256
@@ -370,10 +375,8 @@
 #define CONFIG_SYS_MALLOC_LEN		\
 		ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024, 0x1000)
 
-#define CONFIG_STACKSIZE		(32 * 1024)	/* regular stack */
-
-#ifdef CONFIG_USE_IRQ
-#error CONFIG_USE_IRQ not supported
-#endif
+#define CONFIG_SYS_SDRAM_BASE	PHYS_SDRAM
+#define CONFIG_SYS_INIT_SP_ADDR	(CONFIG_SYS_SDRAM_BASE + 0x1000 - \
+				GENERATED_GBL_DATA_SIZE)
 
 #endif