X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fppmc8260.h;h=d671dccc19b7b7464c96210728c8d7b6bd7da285;hb=4745acaa1a603b67f6b9b7970365ebadd7d6586f;hp=580b590e172644890dcaedd8062c689d295da4f8;hpb=fe8c2806cdba70479e351299881a395dc2be7785;p=u-boot

diff --git a/include/configs/ppmc8260.h b/include/configs/ppmc8260.h
index 580b590e17..d671dccc19 100644
--- a/include/configs/ppmc8260.h
+++ b/include/configs/ppmc8260.h
@@ -238,26 +238,26 @@
 /* Define a command string that is automatically executed when no character
  * is read on the console interface withing "Boot Delay" after reset.
  */
-#define CONFIG_BOOT_ROOT_INITRD 0	/* Use ram disk for the root file system */
-#define CONFIG_BOOT_ROOT_NFS	1	/* Use a NFS mounted root file system */
+#undef	CONFIG_BOOT_ROOT_INITRD 	/* Use ram disk for the root file system */
+#define	CONFIG_BOOT_ROOT_NFS		/* Use a NFS mounted root file system */
 
-#if CONFIG_BOOT_ROOT_INITRD
+#ifdef CONFIG_BOOT_ROOT_INITRD
 #define CONFIG_BOOTCOMMAND \
 	"version;" \
 	"echo;" \
 	"bootp;" \
 	"setenv bootargs root=/dev/ram0 rw " \
-	"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off;" \
+	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off;" \
 	"bootm"
 #endif /* CONFIG_BOOT_ROOT_INITRD */
 
-#if CONFIG_BOOT_ROOT_NFS
+#ifdef CONFIG_BOOT_ROOT_NFS
 #define CONFIG_BOOTCOMMAND \
 	"version;" \
 	"echo;" \
 	"bootp;" \
-	"setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) " \
-	"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off;" \
+	"setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
+	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off;" \
 	"bootm"
 #endif /* CONFIG_BOOT_ROOT_NFS */
 
@@ -279,7 +279,6 @@
 #define CONFIG_COMMANDS		(((CONFIG_CMD_DFL & ~(CFG_CMD_KGDB))) | \
 				CFG_CMD_ELF	| \
 				CFG_CMD_ASKENV	| \
-				CFG_CMD_ECHO	| \
 				CFG_CMD_REGINFO | \
 				CFG_CMD_MEMTEST | \
 				CFG_CMD_MII	| \
@@ -297,6 +296,7 @@
 
 #define CONFIG_MPC8260		1	/* This is an MPC8260 CPU   */
 #define CONFIG_PPMC8260		1	/* on an Wind River PPMC8260 Board  */
+#define CONFIG_CPM2		1	/* Has a CPM2 */
 
 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 #include <cmd_confdefs.h>
@@ -445,6 +445,7 @@
  */
 
 #define CFG_FLASH_CFI		1	/* Flash is CFI conformant		*/
+#define CFG_FLASH_CFI_DRIVER	1	/* Use the common driver		*/
 #define CFG_MAX_FLASH_SECT	128	/* max number of sectors on one chip	*/
 #define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
 #define CFG_FLASH_INCREMENT	0	/* there is only one bank		*/