X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fr0p7734.h;h=523764d8e9307bcceffafb6413cf1f5c8e3016d2;hb=d99894dd3a713ea6226ac39a7e332b55cf8aca49;hp=2d7e326f5126f213bd7b5fb274041e98237f1ecc;hpb=9dd1d0aa4e086bc8a5eaf19a67825c3323c41c5a;p=u-boot

diff --git a/include/configs/r0p7734.h b/include/configs/r0p7734.h
index 2d7e326f51..523764d8e9 100644
--- a/include/configs/r0p7734.h
+++ b/include/configs/r0p7734.h
@@ -1,84 +1,37 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Configuation settings for the Renesas Solutions r0p7734 board
  *
  * Copyright (C) 2010, 2011 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __R0P7734_H
 #define __R0P7734_H
 
-#undef DEBUG
 #define CONFIG_CPU_SH7734	1
-#define CONFIG_R0P7734		1
 #define CONFIG_400MHZ_MODE	1
-/* #define CONFIG_533MHZ_MODE	1 */
-
-#define CONFIG_BOARD_LATE_INIT
-#define CONFIG_SYS_TEXT_BASE 0x8FFC0000
-
-#define CONFIG_CMD_SDRAM
-#define CONFIG_CMD_ENV
-
-#define CONFIG_BAUDRATE		115200
-#define CONFIG_BOOTARGS		"console=ttySC3,115200"
 
+#define CONFIG_DISPLAY_BOARDINFO
 #undef  CONFIG_SHOW_BOOT_PROGRESS
 
 /* Ether */
-#define CONFIG_SH_ETHER 1
 #define CONFIG_SH_ETHER_USE_PORT (0)
 #define CONFIG_SH_ETHER_PHY_ADDR (0x0)
-#define CONFIG_PHYLIB
 #define CONFIG_PHY_SMSC 1
 #define CONFIG_BITBANGMII
 #define CONFIG_BITBANGMII_MULTI
 #define CONFIG_SH_ETHER_SH7734_MII (0x00) /* MII */
 #define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_MII
-#ifndef CONFIG_SH_ETHER
-# define CONFIG_SMC911X
-# define CONFIG_SMC911X_16_BIT
-# define CONFIG_SMC911X_BASE (0x84000000)
-#endif
-
-/* I2C */
-#define CONFIG_SH_SH7734_I2C	1
-#define CONFIG_HARD_I2C			1
-#define CONFIG_I2C_MULTI_BUS	1
-#define CONFIG_SYS_MAX_I2C_BUS	2
-#define CONFIG_SYS_I2C_MODULE	0
-#define CONFIG_SYS_I2C_SPEED	100000 /* 100 kHz */
-#define CONFIG_SYS_I2C_SLAVE	0x50
-#define CONFIG_SH_I2C_DATA_HIGH	4
-#define CONFIG_SH_I2C_DATA_LOW	5
-#define CONFIG_SH_I2C_CLOCK		500000000
-#define CONFIG_SH_I2C_BASE0		0xFFC70000
-#define CONFIG_SH_I2C_BASE1		0xFFC7100
 
 /* undef to save memory	*/
-#define CONFIG_SYS_LONGHELP
-/* Monitor Command Prompt */
-/* Buffer size for input from the Console */
-#define CONFIG_SYS_CBSIZE		256
-/* Buffer size for Console output */
-#define CONFIG_SYS_PBSIZE		256
-/* max args accepted for monitor commands */
-#define CONFIG_SYS_MAXARGS		16
-/* Buffer size for Boot Arguments passed to kernel */
-#define CONFIG_SYS_BARGSIZE	512
 /* List of legal baudrate settings for this board */
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 115200 }
 
 /* SCIF */
-#define CONFIG_SCIF_CONSOLE	1
 #define CONFIG_SCIF			1
 #define CONFIG_CONS_SCIF3	1
 
 /* Suppress display of console information at boot */
-#undef  CONFIG_SYS_CONSOLE_INFO_QUIET
-#undef  CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
-#undef  CONFIG_SYS_CONSOLE_ENV_OVERWRITE
 
 /* SDRAM */
 #define CONFIG_SYS_SDRAM_BASE	(0x88000000)
@@ -88,7 +41,6 @@
 #define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE)
 #define CONFIG_SYS_MEMTEST_END	 (CONFIG_SYS_MEMTEST_START + 100 * 1024 * 1024)
 /* Enable alternate, more extensive, memory test */
-#undef  CONFIG_SYS_ALT_MEMTEST
 /* Scratch address used by the alternate memory test */
 #undef  CONFIG_SYS_MEMTEST_SCRATCH
 
@@ -132,7 +84,6 @@
 #define CONFIG_SYS_BOOTMAPSZ	(8 * 1024 * 1024)
 
 /* ENV setting */
-#define CONFIG_ENV_IS_IN_FLASH
 #define CONFIG_ENV_OVERWRITE	1
 #define CONFIG_ENV_SECT_SIZE	(128 * 1024)
 #define CONFIG_ENV_SIZE		(CONFIG_ENV_SECT_SIZE)