X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fr7780mp.h;h=bb79a9ffeaa4a005e3a243ebc5f40e10d9b83d5b;hb=dbf0518b608b1395bf81bad0b89e314c17ba339c;hp=802416f3e00eedab2ce0665df01624cf2a960493;hpb=e2b5afc1bfa15a2f8a70d454612007755418f534;p=u-boot diff --git a/include/configs/r7780mp.h b/include/configs/r7780mp.h index 802416f3e0..bb79a9ffea 100644 --- a/include/configs/r7780mp.h +++ b/include/configs/r7780mp.h @@ -4,73 +4,40 @@ * Copyright (C) 2007,2008 Nobuhiro Iwamatsu * Copyright (C) 2008 Yusuke Goda * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * SPDX-License-Identifier: GPL-2.0+ */ #ifndef __R7780RP_H #define __R7780RP_H -#undef DEBUG -#define CONFIG_SH 1 -#define CONFIG_SH4A 1 #define CONFIG_CPU_SH7780 1 #define CONFIG_R7780MP 1 #define CONFIG_SYS_R7780MP_OLD_FLASH 1 #define __LITTLE_ENDIAN__ 1 +#define CONFIG_DISPLAY_BOARDINFO + /* * Command line configuration. */ #define CONFIG_CMD_SDRAM -#define CONFIG_CMD_FLASH -#define CONFIG_CMD_MEMORY #define CONFIG_CMD_PCI -#define CONFIG_CMD_NET -#define CONFIG_CMD_PING -#define CONFIG_CMD_SAVEENV -#define CONFIG_CMD_NFS -#define CONFIG_CMD_IDE -#define CONFIG_CMD_EXT2 -#define CONFIG_DOS_PARTITION #define CONFIG_SCIF_CONSOLE 1 -#define CONFIG_BAUDRATE 115200 #define CONFIG_CONS_SCIF0 1 -#define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTARGS "console=ttySC0,115200" #define CONFIG_ENV_OVERWRITE 1 -/* check for keypress on bootdelay==0 */ -/*#define CONFIG_ZERO_BOOTDELAY_CHECK*/ - +#define CONFIG_SYS_TEXT_BASE 0x0FFC0000 #define CONFIG_SYS_SDRAM_BASE (0x08000000) #define CONFIG_SYS_SDRAM_SIZE (128 * 1024 * 1024) #define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_PROMPT "=> " #define CONFIG_SYS_CBSIZE 256 #define CONFIG_SYS_PBSIZE 256 #define CONFIG_SYS_MAXARGS 16 #define CONFIG_SYS_BARGSIZE 512 -/* List of legal baudrate settings for this board */ -#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 57600, 38400, 19200, 9600 } #define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE) #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_TEXT_BASE - 0x100000) @@ -100,7 +67,6 @@ /* Size of DRAM reserved for malloc() use */ #define CONFIG_SYS_MALLOC_LEN (1204 * 1024) -/* size in bytes reserved for initial data */ #define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024) #define CONFIG_SYS_RX_ETH_BUFFER (8) @@ -120,20 +86,18 @@ /* Board Clock */ #define CONFIG_SYS_CLK_FREQ 33333333 +#define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ +#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ #define CONFIG_SYS_TMU_CLK_DIV 4 -#define CONFIG_SYS_HZ 1000 /* PCI Controller */ #if defined(CONFIG_CMD_PCI) -#define CONFIG_PCI #define CONFIG_SH4_PCI #define CONFIG_SH7780_PCI #define CONFIG_SH7780_PCI_LSR 0x07f00001 #define CONFIG_SH7780_PCI_LAR CONFIG_SYS_SDRAM_SIZE #define CONFIG_SH7780_PCI_BAR CONFIG_SYS_SDRAM_SIZE -#define CONFIG_PCI_PNP #define CONFIG_PCI_SCAN_SHOW 1 -#define __io #define __mem_pci #define CONFIG_PCI_MEM_BUS 0xFD000000 /* Memory space base addr */ @@ -149,17 +113,13 @@ #endif /* CONFIG_CMD_PCI */ #if defined(CONFIG_CMD_NET) -/* -#define CONFIG_NET_MULTI -#define CONFIG_RTL8169 -*/ /* AX88796L Support(NE2000 base chip) */ #define CONFIG_DRIVER_AX88796L #define CONFIG_DRIVER_NE2000_BASE 0xA4100000 #endif /* Compact flash Support */ -#if defined(CONFIG_CMD_IDE) +#if defined(CONFIG_IDE) #define CONFIG_IDE_RESET 1 #define CONFIG_SYS_PIO_MODE 1 #define CONFIG_SYS_IDE_MAXBUS 1 /* IDE bus */ @@ -170,6 +130,6 @@ #define CONFIG_SYS_ATA_REG_OFFSET 0x1000 /* reg offset */ #define CONFIG_SYS_ATA_ALT_OFFSET 0x800 /* alternate register offset */ #define CONFIG_IDE_SWAP_IO -#endif /* CONFIG_CMD_IDE */ +#endif /* CONFIG_IDE */ #endif /* __R7780RP_H */