X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fs5p_goni.h;h=56e83478f8e857fe975e42f610758c0c3a8d2ee8;hb=abbab70363dcdb270cbf24d47849214dd3a3e010;hp=ff0dbd3c21ae5ff229f4160a429c6e0bc3f4796f;hpb=f56348af5d255f6dc2a8bcd7d798ab5edf8fba25;p=u-boot

diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h
index ff0dbd3c21..56e83478f8 100644
--- a/include/configs/s5p_goni.h
+++ b/include/configs/s5p_goni.h
@@ -28,9 +28,8 @@
 #define __CONFIG_H
 
 /* High Level Configuration Options */
-#define CONFIG_ARMV7		1	/* This is an ARM V7 CPU core */
 #define CONFIG_SAMSUNG		1	/* in a SAMSUNG core */
-#define CONFIG_S5PC1XX		1	/* which is in a S5PC1XX Family */
+#define CONFIG_S5P		1	/* which is in a S5P Family */
 #define CONFIG_S5PC110		1	/* which is in a S5PC110 */
 #define CONFIG_MACH_GONI	1	/* working with Goni */
 
@@ -40,8 +39,6 @@
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO
 
-#undef CONFIG_SKIP_RELOCATE_UBOOT
-
 /* input clock of PLL: has 24MHz input clock at S5PC110 */
 #define CONFIG_SYS_CLK_FREQ_C110	24000000
 
@@ -58,15 +55,21 @@
  * 1MB = 0x100000, 0x100000 = 1024 * 1024
  */
 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (1 << 20))
-#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes for */
-						/* initial data */
 /*
  * select serial console configuration
  */
 #define CONFIG_SERIAL2			1	/* use SERIAL2 */
-#define CONFIG_SERIAL_MULTI		1
 #define CONFIG_BAUDRATE			115200
 
+/* MMC */
+#define CONFIG_GENERIC_MMC
+#define CONFIG_MMC
+#define CONFIG_SDHCI
+#define CONFIG_S5P_SDHCI
+
+/* PWM */
+#define CONFIG_PWM			1
+
 /* It should define before config_cmd_default.h */
 #define CONFIG_SYS_NO_FLASH		1
 
@@ -82,6 +85,7 @@
 #define CONFIG_CMD_REGINFO
 #define CONFIG_CMD_ONENAND
 #define CONFIG_CMD_MTDPARTS
+#define CONFIG_CMD_MMC
 
 #define CONFIG_BOOTDELAY		1
 #define CONFIG_ZERO_BOOTDELAY_CHECK
@@ -171,7 +175,6 @@
 /* Miscellaneous configurable options */
 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
 #define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser	*/
-#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #define CONFIG_SYS_PROMPT	"Goni # "
 #define CONFIG_SYS_CBSIZE	256	/* Console I/O Buffer Size */
 #define CONFIG_SYS_PBSIZE	384	/* Print Buffer Size */
@@ -185,12 +188,6 @@
 
 #define CONFIG_SYS_HZ			1000
 
-/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
-/* Stack sizes */
-#define CONFIG_STACKSIZE	(256 << 10)	/* 256 KiB */
-
 /* Goni has 3 banks of DRAM, but swap the bank */
 #define CONFIG_NR_DRAM_BANKS	3
 #define PHYS_SDRAM_1		CONFIG_SYS_SDRAM_BASE	/* OneDRAM Bank #0 */
@@ -214,4 +211,27 @@
 
 #define CONFIG_DOS_PARTITION		1
 
+#define CONFIG_SYS_INIT_SP_ADDR	(CONFIG_SYS_LOAD_ADDR - 0x1000000)
+
+#define CONFIG_SYS_CACHELINE_SIZE       64
+
+#define CONFIG_POWER
+#define CONFIG_POWER_I2C
+#define CONFIG_POWER_MAX8998
+
+#include <asm/arch/gpio.h>
+/*
+ * I2C Settings
+ */
+#define CONFIG_SOFT_I2C_GPIO_SCL s5pc110_gpio_get_nr(j4, 3)
+#define CONFIG_SOFT_I2C_GPIO_SDA s5pc110_gpio_get_nr(j4, 0)
+
+#define CONFIG_SOFT_I2C	1
+#define CONFIG_SYS_I2C_SPEED	50000
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_SYS_MAX_I2C_BUS	7
+#define CONFIG_USB_GADGET
+#define CONFIG_USB_GADGET_S3C_UDC_OTG
+#define CONFIG_USB_GADGET_DUALSPEED
+
 #endif	/* __CONFIG_H */