X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fsacsng.h;h=54d55a0a1e425f7030755b731bbf133fd915bfa3;hb=de6f604de245b19ce2e330bc63b6522af134d7ae;hp=f4e08c689f1300e12311a29cf9b221f4f0088d12;hpb=156feb90d200f186cdfd856d7f6f1878bb1bec1e;p=u-boot

diff --git a/include/configs/sacsng.h b/include/configs/sacsng.h
index f4e08c689f..54d55a0a1e 100644
--- a/include/configs/sacsng.h
+++ b/include/configs/sacsng.h
@@ -10,8 +10,7 @@
  * Advent Networks, Inc. <http://www.adventnetworks.com>
  * Jay Monkman <jtm@smoothsmoothie.com>
  *
- * Configuration settings for the WindRiver SBC8260 board.
- *	See http://www.windriver.com/products/html/sbc8260.html
+ * Configuration settings for the SACSng 8260 board.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -35,6 +34,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#define	CONFIG_SYS_TEXT_BASE	0x40000000
+
 #undef DEBUG_BOOTP_EXT	      /* Debug received vendor fields */
 
 #undef CONFIG_LOGBUFFER       /* External logbuffer support */
@@ -85,7 +86,7 @@
 #define CONFIG_SYS_SBC_BOOT_LOW 1
 
 /* What should the base address of the main FLASH be and how big is
- * it (in MBytes)?  This must contain TEXT_BASE from board/sacsng/config.mk
+ * it (in MBytes)?  This must contain CONFIG_SYS_TEXT_BASE from board/sacsng/config.mk
  * The main FLASH is whichever is connected to *CS0.
  */
 #define CONFIG_SYS_FLASH0_BASE 0x40000000
@@ -179,6 +180,10 @@
  */
 
 #define MDIO_PORT	2	        /* Port A=0, B=1, C=2, D=3 */
+#define MDIO_DECLARE	volatile ioport_t *iop = ioport_addr ( \
+				(immap_t *) CONFIG_SYS_IMMR, MDIO_PORT )
+#define MDC_DECLARE	MDIO_DECLARE
+
 #define MDIO_ACTIVE	(iop->pdir |=  0x40000000)
 #define MDIO_TRISTATE	(iop->pdir &= ~0x40000000)
 #define MDIO_READ	((iop->pdat &  0x40000000) != 0)
@@ -198,7 +203,7 @@
  *  - RX clk is CLK11
  *  - TX clk is CLK12
  */
-# define CONFIG_SYS_CMXSCR_VALUE	(CMXSCR_RS1CS_CLK11  | CMXSCR_TS1CS_CLK12)
+# define CONFIG_SYS_CMXSCR_VALUE1	(CMXSCR_RS1CS_CLK11  | CMXSCR_TS1CS_CLK12)
 
 #elif defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 2)
 
@@ -208,8 +213,8 @@
  * - Select bus for bd/buffers (see 28-13)
  * - Enable Full Duplex in FSMR
  */
-# define CONFIG_SYS_CMXFCR_MASK	(CMXFCR_FC2|CMXFCR_RF2CS_MSK|CMXFCR_TF2CS_MSK)
-# define CONFIG_SYS_CMXFCR_VALUE	(CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14)
+# define CONFIG_SYS_CMXFCR_MASK2	(CMXFCR_FC2|CMXFCR_RF2CS_MSK|CMXFCR_TF2CS_MSK)
+# define CONFIG_SYS_CMXFCR_VALUE2	(CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14)
 # define CONFIG_SYS_CPMFCR_RAMTYPE	0
 # define CONFIG_SYS_FCC_PSMR		(FCC_PSMR_FDE | FCC_PSMR_LPB)
 
@@ -408,9 +413,9 @@
     "echo hostname  ${hostname}\0" \
 "ana=run adc ; run dac\0" \
 "adc=run adc-12 ; run adc-34\0" \
-"adc-12=echo ### ADC-12 ; imd.b e 81 e\0" \
-"adc-34=echo ### ADC-34 ; imd.b f 81 e\0" \
-"dac=echo ### DAC ; imd.b 11 81 5\0" \
+"adc-12=echo ### ADC-12 ; i2c md e 81 e\0" \
+"adc-34=echo ### ADC-34 ; i2c md f 81 e\0" \
+"dac=echo ### DAC ; i2c md 11 81 5\0" \
 "boot-hook=echo\0"
 
 /* What should the console's baud rate be? */
@@ -493,7 +498,6 @@
 
 #undef  CONFIG_SYS_HUSH_PARSER
 #ifdef  CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
 #endif
 
 /* When CONFIG_TIMESTAMP is selected, the timestamp (date and time)
@@ -541,7 +545,6 @@
  *****************************************************************************/
 
 #define CONFIG_MPC8260		1	/* This is an MPC8260 CPU   */
-#define CONFIG_SBC8260		1	/* on an EST SBC8260 Board  */
 #define CONFIG_SACSng		1	/* munged for the SACSng */
 #define CONFIG_CPM2		1	/* Has a CPM2 */
 
@@ -616,9 +619,6 @@
 #define CONFIG_SYS_MEMTEST_END		( CONFIG_SYS_SDRAM_SIZE * 1024 * 1024 \
 				- CONFIG_SYS_MEM_END_USAGE )
 
-/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
 /*
  * Low Level Configuration Settings
  * (address mappings, register initial values, etc.)
@@ -667,9 +667,8 @@
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
 #define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_END	0x4000	/* End of used area in DPRAM	*/
-#define CONFIG_SYS_GBL_DATA_SIZE	128	/* bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_SIZE	0x4000	/* Size of used area in DPRAM	*/
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
@@ -1058,12 +1057,4 @@
 			   ORxG_EHTR)
 #endif /* (defined(CONFIG_SYS_FLASH1_BASE) && defined(CONFIG_SYS_FLASH1_SIZE)) */
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01	/* Normal Power-On: Boot from FLASH  */
-#define BOOTFLAG_WARM	0x02	/* Software reboot		     */
-
 #endif	/* __CONFIG_H */