X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fsama5d2_xplained.h;h=545ba1740de8a5a7efa7e4fb778b45d53ad931b7;hb=cf2c7784bd73b77f3a4c423d59d38b47fa0504f1;hp=e684d2a77dd13778be9b712da41909ec9122fa7c;hpb=f35ed9edf3b92158925c466d04f8fc6986207089;p=u-boot

diff --git a/include/configs/sama5d2_xplained.h b/include/configs/sama5d2_xplained.h
index e684d2a77d..545ba1740d 100644
--- a/include/configs/sama5d2_xplained.h
+++ b/include/configs/sama5d2_xplained.h
@@ -10,109 +10,39 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-/* No NOR flash, this definition should put before common header */
-#define CONFIG_SYS_NO_FLASH
-
 #include "at91-sama5_common.h"
 
-/* serial console */
-#define CONFIG_ATMEL_USART
-#define CONFIG_USART_BASE		ATMEL_BASE_UART1
-#define CONFIG_USART_ID			ATMEL_ID_UART1
+#define CONFIG_MISC_INIT_R
 
 /* SDRAM */
 #define CONFIG_NR_DRAM_BANKS		1
-#define CONFIG_SYS_SDRAM_BASE           ATMEL_BASE_DDRCS
+#define CONFIG_SYS_SDRAM_BASE           0x20000000
 #define CONFIG_SYS_SDRAM_SIZE		0x20000000
 
 #ifdef CONFIG_SPL_BUILD
-#define CONFIG_SYS_INIT_SP_ADDR		0x210000
+#define CONFIG_SYS_INIT_SP_ADDR		0x218000
 #else
 #define CONFIG_SYS_INIT_SP_ADDR \
-	(CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
+	(CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
 #endif
 
 #define CONFIG_SYS_LOAD_ADDR		0x22000000 /* load address */
 
-#undef CONFIG_AT91_GPIO
-#define CONFIG_ATMEL_PIO4
-
 /* SerialFlash */
 #ifdef CONFIG_CMD_SF
-#define CONFIG_ATMEL_SPI
-#define CONFIG_ATMEL_SPI0
-#define CONFIG_SPI_FLASH_ATMEL
 #define CONFIG_SF_DEFAULT_BUS		0
 #define CONFIG_SF_DEFAULT_CS		0
 #define CONFIG_SF_DEFAULT_SPEED		30000000
 #endif
 
-/* NAND flash */
-#undef CONFIG_CMD_NAND
-
-/* MMC */
-
-#ifdef CONFIG_CMD_MMC
-#define CONFIG_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_SDHCI
-#define CONFIG_ATMEL_SDHCI
-#define CONFIG_ATMEL_SDHCI0
-#define CONFIG_ATMEL_SDHCI1
-#define CONFIG_SUPPORT_EMMC_BOOT
-#endif
-
-/* USB */
-
-#ifdef CONFIG_CMD_USB
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_ATMEL
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS	3
-#endif
-
-/* USB device */
-#define CONFIG_USB_ETHER
-#define CONFIG_USB_ETH_RNDIS
-#define CONFIG_USBNET_MANUFACTURER      "Atmel SAMA5D2 XPlained"
-
-#if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC)
-#define CONFIG_DOS_PARTITION
-#endif
-
-/* Ethernet Hardware */
-#define CONFIG_MACB
-#define CONFIG_RMII
-#define CONFIG_NET_RETRY_COUNT		20
-#define CONFIG_MACB_SEARCH_PHY
-
-/* LCD */
-/* #define CONFIG_LCD */
-
-#ifdef CONFIG_LCD
-#define LCD_BPP				LCD_COLOR16
-#define LCD_OUTPUT_BPP                  24
-#define CONFIG_LCD_LOGO
-#define CONFIG_LCD_INFO
-#define CONFIG_LCD_INFO_BELOW_LOGO
-#define CONFIG_SYS_WHITE_ON_BLACK
-#define CONFIG_ATMEL_HLCD
-#define CONFIG_ATMEL_LCD_RGB565
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-#endif
-
-#ifdef CONFIG_SYS_USE_MMC
+#ifdef CONFIG_SD_BOOT
 
 /* bootstrap + u-boot + env in sd card */
-#undef FAT_ENV_DEVICE_AND_PART
 #undef CONFIG_BOOTCOMMAND
 
-#define FAT_ENV_DEVICE_AND_PART	"1"
 #define CONFIG_BOOTCOMMAND	"fatload mmc 1:1 0x21000000 at91-sama5d2_xplained.dtb; " \
 				"fatload mmc 1:1 0x22000000 zImage; " \
 				"bootz 0x22000000 - 0x21000000"
-#undef CONFIG_BOOTARGS
-#define CONFIG_BOOTARGS \
-	"console=ttyS0,115200 earlyprintk root=/dev/mmcblk1p2 rw rootwait"
 
 #endif
 
@@ -125,19 +55,15 @@
 #define CONFIG_SYS_SPL_MALLOC_START	0x20080000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x80000
 
-#define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SYS_MONITOR_LEN		(512 << 10)
 
-#ifdef CONFIG_SYS_USE_MMC
-#define CONFIG_SPL_LDSCRIPT		arch/arm/mach-at91/armv7/u-boot-spl.lds
-#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	0x400
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200
+#ifdef CONFIG_SD_BOOT
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME		"u-boot.img"
 
-#elif CONFIG_SYS_USE_SERIALFLASH
+#elif CONFIG_SPI_BOOT
 #define CONFIG_SPL_SPI_LOAD
-#define CONFIG_SYS_SPI_U_BOOT_OFFS	0x8000
+#define CONFIG_SYS_SPI_U_BOOT_OFFS	0x10000
 
 #endif