X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fsbc2410x.h;h=025ad0953c2807115f86aa80897fedb888326e68;hb=9844d027b52cc89264f6bf7686e26d9dc50134fd;hp=f3dc7fe97939d24d340d4afb16a7f6780ccb60a1;hpb=84efbf4d144ff8aaed3cca036aebb1fe69eff3f4;p=u-boot

diff --git a/include/configs/sbc2410x.h b/include/configs/sbc2410x.h
index f3dc7fe979..025ad0953c 100644
--- a/include/configs/sbc2410x.h
+++ b/include/configs/sbc2410x.h
@@ -43,9 +43,10 @@
  * High Level Configuration Options
  * (easy to change)
  */
-#define CONFIG_ARM920T		1	/* This is an ARM920T Core	*/
-#define	CONFIG_S3C2410		1	/* in a SAMSUNG S3C2410 SoC     */
-#define CONFIG_SBC2410X		1	/* on a friendly-arm SBC-2410X Board  */
+#define CONFIG_ARM920T	1	/* This is an ARM920T Core	*/
+#define CONFIG_S3C24X0	1	/* in a SAMSUNG S3C24x0-type SoC	*/
+#define CONFIG_S3C2410	1	/* specifically a SAMSUNG S3C2410 SoC	*/
+#define CONFIG_SBC2410X	1	/* on a friendly-arm SBC-2410X Board  */
 
 /* input clock of PLL */
 #define CONFIG_SYS_CLK_FREQ	12000000/* the SBC2410X has 12MHz input clock */
@@ -63,9 +64,10 @@
 /*
  * Hardware drivers
  */
-#define CONFIG_DRIVER_CS8900	1	/* we have a CS8900 on-board */
-#define CS8900_BASE		0x19000300
-#define CS8900_BUS16		1 /* the Linux driver does accesses as shorts */
+#define CONFIG_NET_MULTI
+#define CONFIG_CS8900		/* we have a CS8900 on-board */
+#define CONFIG_CS8900_BASE	0x19000300
+#define CONFIG_CS8900_BUS16	/* the Linux driver does accesses as shorts */
 
 /*
  * select serial console configuration
@@ -138,9 +140,7 @@
 
 #define	CONFIG_SYS_LOAD_ADDR		0x33000000	/* default load address	*/
 
-/* the PWM TImer 4 uses a counter of 15625 for 10 ms, so we need */
-/* it to wrap 100 times (total 1562500) to get 1 sec. */
-#define	CONFIG_SYS_HZ			1562500
+#define	CONFIG_SYS_HZ			1000
 
 /* valid baudrates */
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }