X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fsbc8349.h;h=dc1978b93b79cd1a615865f061a78eb5f165c446;hb=38045f54478f8272aa21079fc75cc647ab0b9179;hp=b7f83e010525eb81bd3c9f71050eb0aef932b986;hpb=e6fe4bd989b93b1f37a25771fc14478dd33aa0df;p=u-boot

diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h
index b7f83e0105..dc1978b93b 100644
--- a/include/configs/sbc8349.h
+++ b/include/configs/sbc8349.h
@@ -19,7 +19,6 @@
  * High Level Configuration Options
  */
 #define CONFIG_E300		1	/* E300 Family */
-#define CONFIG_MPC83xx		1	/* MPC83xx family */
 #define CONFIG_MPC834x		1	/* MPC834x family */
 #define CONFIG_MPC8349		1	/* MPC8349 specific */
 #define CONFIG_SBC8349		1	/* WRS SBC8349 board specific */
@@ -51,8 +50,6 @@
 #endif
 #endif
 
-#undef CONFIG_BOARD_EARLY_INIT_F		/* call board_pre_init */
-
 #define CONFIG_SYS_IMMR		0xE0000000
 
 #undef CONFIG_SYS_DRAM_TEST		/* memory test, takes time */
@@ -266,7 +263,6 @@
  * Serial Port
  */
 #define CONFIG_CONS_INDEX     1
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
 #define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
@@ -279,13 +275,6 @@
 
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
 #define CONFIG_AUTO_COMPLETE		/* add autocompletion support   */
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-
-/* pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT	1
-#define CONFIG_OF_BOARD_SETUP	1
-#define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
 /* I2C */
 #define CONFIG_SYS_I2C
@@ -339,8 +328,6 @@
 #undef PCI_ONE_PCI1
 #endif
 
-#define CONFIG_PCI_PNP		/* do pci plug-and-play */
-
 #undef CONFIG_EEPRO100
 #undef CONFIG_TULIP
 
@@ -393,7 +380,6 @@
 #define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
 
 #else
-	#define CONFIG_SYS_NO_FLASH	1	/* Flash is not usable now */
 	#define CONFIG_ENV_IS_NOWHERE	1	/* Store ENV in memory only */
 	#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - 0x1000)
 	#define CONFIG_ENV_SIZE		0x2000
@@ -402,7 +388,6 @@
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
 #define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
 
-
 /*
  * BOOTP options
  */
@@ -411,26 +396,14 @@
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME
 
-
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
 
 #if defined(CONFIG_PCI)
     #define CONFIG_CMD_PCI
 #endif
 
-#if defined(CONFIG_SYS_RAMBOOT)
-    #undef CONFIG_CMD_SAVEENV
-    #undef CONFIG_CMD_LOADS
-#endif
-
-
 #undef CONFIG_WATCHDOG			/* watchdog disabled */
 
 /*
@@ -539,7 +512,6 @@
 	HID0_ENABLE_M_BIT |\
 	HID0_ENABLE_ADDRESS_BROADCAST) */
 
-
 #define CONFIG_SYS_HID2 HID2_HBE
 
 #define CONFIG_HIGH_BATS	1	/* High BATs supported */
@@ -662,7 +634,6 @@
 				/* default location for tftp and bootm */
 #define CONFIG_LOADADDR		800000
 
-#define CONFIG_BOOTDELAY	6	/* -1 disables auto-boot */
 #undef  CONFIG_BOOTARGS		/* the boot command will set bootargs */
 
 #define CONFIG_BAUDRATE	 115200