X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fsbc8641d.h;h=248785db381ab7b46702376510c3d91a8fb1f522;hb=fc5d54b7fa3fa602e06e2f0863c0b134d6afca70;hp=f88d685db29784dc06c541604ddd41331dc6e9fa;hpb=c1924d85af4a07dc70aef1ef95c48b54a136733f;p=u-boot

diff --git a/include/configs/sbc8641d.h b/include/configs/sbc8641d.h
index f88d685db2..248785db38 100644
--- a/include/configs/sbc8641d.h
+++ b/include/configs/sbc8641d.h
@@ -20,7 +20,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-
 /* High Level Configuration Options */
 #define CONFIG_MPC8641		1	/* MPC8641 specific */
 #define CONFIG_SBC8641D		1	/* SBC8641D board specific */
@@ -45,8 +44,8 @@
 #define CONFIG_SRIO1			/* SRIO port 1 */
 
 #define CONFIG_PCI		1	/* Enable PCIE */
-#define CONFIG_PCIE1		1	/* PCIE controler 1 (slot 1) */
-#define CONFIG_PCIE2		1	/* PCIE controler 2 (slot 2) */
+#define CONFIG_PCIE1		1	/* PCIE controller 1 (slot 1) */
+#define CONFIG_PCIE2		1	/* PCIE controller 2 (slot 2) */
 #define CONFIG_FSL_PCI_INIT	1	/* Use common FSL init code */
 #define CONFIG_PCI_INDIRECT_BRIDGE 1	/* indirect PCI bridge support */
 #define CONFIG_FSL_LAW		1	/* Use common FSL init code */
@@ -67,7 +66,6 @@
 #define BANK_INTERLEAVING		0x22000000
 #define SUPER_BANK_INTERLEAVING		0x23000000
 
-
 #define CONFIG_ALTIVEC          1
 
 /*
@@ -173,7 +171,6 @@
     #define CONFIG_SYS_DDR2_CLK_CTRL	0x03800000
     #define CONFIG_SYS_DDR2_CFG_1B	0xC3008008
 
-
 #endif
 
 /* #define CONFIG_ID_EEPROM	1
@@ -257,18 +254,6 @@
 #define CONFIG_SYS_NS16550_COM1        (CONFIG_SYS_CCSRBAR+0x4500)
 #define CONFIG_SYS_NS16550_COM2        (CONFIG_SYS_CCSRBAR+0x4600)
 
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-#ifdef  CONFIG_SYS_HUSH_PARSER
-#endif
-
-/*
- * Pass open firmware flat tree to kernel
- */
-#define CONFIG_OF_LIBFDT		1
-#define CONFIG_OF_BOARD_SETUP		1
-#define CONFIG_OF_STDOUT_VIA_ALIAS	1
-
 /*
  * I2C
  */
@@ -312,8 +297,6 @@
 
 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 
-#undef CONFIG_SYS_SCSI_SCAN_BUS_REVERSE
-
 #define CONFIG_PCI_PNP			/* do pci plug-and-play */
 
 #undef CONFIG_EEPRO100
@@ -479,8 +462,6 @@
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
 #define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
 
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_I2C
 #define CONFIG_CMD_REGINFO
 
 #if defined(CONFIG_PCI)
@@ -546,7 +527,6 @@
 /* default location for tftp and bootm */
 #define CONFIG_LOADADDR		1000000
 
-#define CONFIG_BOOTDELAY 10	/* -1 disables auto-boot */
 #undef  CONFIG_BOOTARGS		/* the boot command will set bootargs */
 
 #define CONFIG_BAUDRATE	115200