X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fsc3.h;h=094d38b27068edb9e60a69faf9ba44355bf008cb;hb=550650ddd0fde00f245bc3da72d7272844198394;hp=7e00ab8c7100ac24707f3959a0df4f84350b834e;hpb=84efbf4d144ff8aaed3cca036aebb1fe69eff3f4;p=u-boot

diff --git a/include/configs/sc3.h b/include/configs/sc3.h
index 7e00ab8c71..094d38b270 100644
--- a/include/configs/sc3.h
+++ b/include/configs/sc3.h
@@ -63,6 +63,7 @@
 #define CONFIG_405GP	1
 
 #define CONFIG_BOARD_EARLY_INIT_F	1
+#define CONFIG_MISC_INIT_R		1	/* Call misc_init_r() */
 
 /*
  * Define IDE_USES_ISA_EMULATION for slower IDE access in the ISA-IO address range
@@ -75,6 +76,11 @@
 /*-----------------------------------------------------------------------
  * Serial Port
  *----------------------------------------------------------------------*/
+#define CONFIG_CONS_INDEX	1	/* Use UART0			*/
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	1
+#define CONFIG_SYS_NS16550_CLK		get_serial_clock()
 #define CONFIG_SERIAL_MULTI
 #undef CONFIG_SERIAL_SOFTWARE_FIFO
 /*
@@ -250,6 +256,7 @@
  */
 #define  CONFIG_HARD_I2C		/* I2C with hardware support	*/
 #undef	CONFIG_SOFT_I2C			/* I2C bit-banged		*/
+#define CONFIG_PPC4XX_I2C		/* use PPC4xx driver		*/
 
 #define I2C_INIT
 #define I2C_ACTIVE 0
@@ -375,15 +382,11 @@
  * CONFIG_SYS_FLASH_BASE   -> start address of internal flash
  * CONFIG_SYS_MONITOR_BASE -> start of u-boot
  */
-#ifndef __ASSEMBLER__
-extern unsigned long offsetOfBigFlash;
-extern unsigned long offsetOfEnvironment;
-#endif
-
 #define CONFIG_SYS_SDRAM_BASE		0x00000000
 #define CONFIG_SYS_FLASH_BASE		0xFFE00000
-#define CONFIG_SYS_MONITOR_BASE	0xFFFC0000     /* placed last 256k */
-#define CONFIG_SYS_MONITOR_LEN		(224 * 1024)	/* Reserve 224 KiB for Monitor	*/
+
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE	/* Start of U-Boot	*/
+#define CONFIG_SYS_MONITOR_LEN		(0xFFFFFFFF - CONFIG_SYS_MONITOR_BASE + 1)
 #define CONFIG_SYS_MALLOC_LEN		(128 * 1024)	/* Reserve 128 KiB for malloc()	*/
 
 /*
@@ -426,8 +429,6 @@ extern unsigned long offsetOfEnvironment;
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_SYS_NAND_BASE		0x77D00000
 
-#define CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
-
 #define CONFIG_JFFS2_NAND 1			/* jffs2 on nand support */
 
 /* No command line, one static partition */
@@ -461,7 +462,7 @@ extern unsigned long offsetOfEnvironment;
  * - internal SRAM (OCM=On Chip Memory) is placed to CONFIG_SYS_OCM_DATA_ADDR
  * - Stackpointer will be located to
  *   (CONFIG_SYS_INIT_RAM_ADDR&0xFFFF0000) | (CONFIG_SYS_INIT_SP_OFFSET&0x0000FFFF)
- *   in cpu/ppc4xx/start.S
+ *   in arch/powerpc/cpu/ppc4xx/start.S
  */
 
 #undef CONFIG_SYS_INIT_DCACHE_CS
@@ -500,7 +501,7 @@ extern unsigned long offsetOfEnvironment;
 #define BOOTFLAG_WARM	0x02		/* Software reboot			*/
 
 /* ################################################################################### */
-/* These defines will be used in cpu/ppc4xx/cpu_init.c to setup external chip selects  */
+/* These defines will be used in arch/powerpc/cpu/ppc4xx/cpu_init.c to setup external chip selects  */
 /* They are currently undefined cause they are initiaized in board/solidcard3/init.S   */
 
 /* This chip select accesses the boot device */