X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fsmartweb.h;h=c6a2f8a8d11decf5fc0a8d653f1afc3d3dcb6671;hb=8730d012c9bd92d6412b3ef6e33b40c5df00f225;hp=0302740cea3f4abab1732f7a829fcbf224b631af;hpb=19a9747535c105fa458d0c9929e6785cf56d1292;p=u-boot

diff --git a/include/configs/smartweb.h b/include/configs/smartweb.h
index 0302740cea..c6a2f8a8d1 100644
--- a/include/configs/smartweb.h
+++ b/include/configs/smartweb.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2007-2008
  * Stelian Pop <stelian@popies.net>
@@ -16,8 +17,6 @@
  * DENX Software Engineering GmbH
  *
  * Configuation settings for the smartweb.
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -35,7 +34,6 @@
  * program. Since the linker has to swallow that define, we must use a pure
  * hex number here!
  */
-#define CONFIG_SYS_TEXT_BASE		0x23000000
 
 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_SLOW_CLOCK	32768		/* slow clock xtal */
@@ -46,16 +44,13 @@
 #define CONFIG_SETUP_MEMORY_TAGS	/* pass memory defs to kernel */
 #define CONFIG_INITRD_TAG		/* pass initrd param to kernel */
 #define CONFIG_SKIP_LOWLEVEL_INIT_ONLY	/* U-Boot is loaded by a bootloader */
-#define CONFIG_BOARD_EARLY_INIT_F	/* call board_early_init_f() */
 
 /* We set the max number of command args high to avoid HUSH bugs. */
 #define CONFIG_SYS_MAXARGS    32
 
 /* setting board specific options */
 #define CONFIG_MACH_TYPE		MACH_TYPE_SMARTWEB
-#define CONFIG_AUTO_COMPLETE
 #define CONFIG_ENV_OVERWRITE    1 /* Overwrite ethaddr / serial# */
-#define CONFIG_AUTO_COMPLETE
 #define CONFIG_SYS_AUTOLOAD "yes"
 #define CONFIG_RESET_TO_RETRY
 
@@ -84,7 +79,6 @@
 
 /* NAND flash settings */
 #define CONFIG_NAND_ATMEL
-#define CONFIG_SYS_NO_FLASH
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_SYS_NAND_BASE		ATMEL_BASE_CS3
 #define CONFIG_SYS_NAND_DBW_8
@@ -93,17 +87,7 @@
 #define CONFIG_SYS_NAND_ENABLE_PIN	AT91_PIN_PC14
 #define CONFIG_SYS_NAND_READY_PIN	AT91_PIN_PC13
 
-#define CONFIG_CMD_MTDPARTS
 #define CONFIG_MTD_DEVICE
-#define MTDIDS_NAME_STR		"atmel_nand"
-#define MTDIDS_DEFAULT		"nand0=" MTDIDS_NAME_STR
-#define MTDPARTS_DEFAULT	"mtdparts=" MTDIDS_NAME_STR ":" \
-					"128k(Bootstrap),"		\
-					"896k(U-Boot),"	\
-					"512k(ENV0),"	\
-					"512k(ENV1),"	\
-					"4M(Linux),"	\
-					"-(Root-FS)"
 
 /* general purpose I/O */
 #define CONFIG_ATMEL_LEGACY		/* required until (g)pio is fixed */
@@ -114,26 +98,18 @@
 #define CONFIG_ATMEL_USART
 #define CONFIG_USART_BASE		ATMEL_BASE_DBGU
 #define CONFIG_USART_ID			ATMEL_ID_SYS
-#define CONFIG_BAUDRATE			115200
 
 /*
  * Ethernet configuration
  *
  */
 #define CONFIG_MACB
-#define CONFIG_PHYLIB
-#define CONFIG_USB_HOST_ETHER
-#define CONFIG_USB_ETHER_ASIX
-#define CONFIG_USB_ETHER_MCS7830
 #define CONFIG_RMII			/* use reduced MII inteface */
 #define CONFIG_NET_RETRY_COUNT	20      /* # of DHCP/BOOTP retries */
 #define CONFIG_AT91_WANTS_COMMON_PHY
 
 /* BOOTP and DHCP options */
 #define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
 #define CONFIG_NFSBOOTCOMMAND						\
 	"setenv autoload yes; setenv autoboot yes; "			\
 	"setenv bootargs ${basicargs} ${mtdparts} "			\
@@ -158,7 +134,6 @@
 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	2
 
 /* USB DFU support */
-#define CONFIG_CMD_MTDPARTS
 #define CONFIG_MTD_DEVICE
 #define CONFIG_MTD_PARTITIONS
 
@@ -172,10 +147,6 @@
 /* General Boot Parameter */
 #define CONFIG_BOOTCOMMAND		"run flashboot"
 #define CONFIG_SYS_CBSIZE		512
-#define CONFIG_SYS_PBSIZE \
-	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_CMDLINE_EDITING
 
 /*
  * RAM Memory address where to put the
@@ -186,7 +157,6 @@
 /*
  * The NAND Flash partitions:
  */
-#define CONFIG_ENV_IS_IN_NAND
 #define CONFIG_ENV_OFFSET		(0x100000)
 #define CONFIG_ENV_OFFSET_REDUND	(0x180000)
 #define CONFIG_ENV_RANGE		(SZ_512K)
@@ -200,15 +170,7 @@
 									\
 	"basicargs=console=ttyS0,115200\0"				\
 									\
-	"mtdparts="MTDPARTS_DEFAULT"\0"
-
-/* Command line & features configuration */
-
-#define CONFIG_CMD_NAND
-
-#ifdef CONFIG_MACB
-#else
-#endif /* CONFIG_MACB */
+	"mtdparts="CONFIG_MTDPARTS_DEFAULT"\0"
 
 #ifdef CONFIG_SPL_BUILD
 #define CONFIG_SYS_INIT_SP_ADDR		0x301000
@@ -225,7 +187,6 @@
 #endif
 
 /* Defines for SPL */
-#define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_TEXT_BASE		0x0
 #define CONFIG_SPL_MAX_SIZE		(SZ_4K)
 
@@ -234,9 +195,7 @@
 #define CONFIG_SYS_SPL_MALLOC_START     (CONFIG_SPL_BSS_START_ADDR + \
 					CONFIG_SPL_BSS_MAX_SIZE)
 #define CONFIG_SYS_SPL_MALLOC_SIZE      CONFIG_SYS_MALLOC_LEN
-#define CONFIG_SPL_LDSCRIPT	arch/arm/mach-at91/arm926ejs/u-boot-spl.lds
 
-#define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SYS_NAND_ENABLE_PIN_SPL	(2*32 + 14)
 #define CONFIG_SYS_USE_NANDFLASH	1
 #define CONFIG_SPL_NAND_DRIVERS
@@ -272,9 +231,7 @@
 #define CONFIG_SYS_AT91_PLLB		0x10483f0e
 
 #if defined(CONFIG_SPL_BUILD)
-#define CONFIG_SYS_THUMB_BUILD
 #define CONFIG_SYS_ICACHE_OFF
 #define CONFIG_SYS_DCACHE_OFF
-#undef CONFIG_SPL_OS_BOOT		/* Not supported by existing map */
 #endif
 #endif /* __CONFIG_H */