X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fsmdk2410.h;h=a8a56fdeb4aec74c5bca901e5d5d23dfb0fabcaa;hb=b7e3129e550957f046c29a917c63f4b503fbfcb9;hp=a4a675bedd154e848d3409315e32da307bc21b55;hpb=1a0787d3c4f51cd1bcd2a1c71a2a10eccff0c3fd;p=u-boot

diff --git a/include/configs/smdk2410.h b/include/configs/smdk2410.h
index a4a675bedd..a8a56fdeb4 100644
--- a/include/configs/smdk2410.h
+++ b/include/configs/smdk2410.h
@@ -45,8 +45,6 @@
 /* input clock of PLL (the SMDK2410 has 12MHz input clock) */
 #define CONFIG_SYS_CLK_FREQ	12000000
 
-#undef CONFIG_USE_IRQ		/* we don't need IRQ/FIQ stuff */
-
 #define CONFIG_CMDLINE_TAG	/* enable passing of ATAGs */
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
@@ -54,7 +52,6 @@
 /*
  * Hardware drivers
  */
-#define CONFIG_NET_MULTI
 #define CONFIG_CS8900		/* we have a CS8900 on-board */
 #define CONFIG_CS8900_BASE	0x19000300
 #define CONFIG_CS8900_BUS16	/* the Linux driver does accesses as shorts */
@@ -69,6 +66,7 @@
  * USB support (currently only works with D-cache off)
  ************************************************************/
 #define CONFIG_USB_OHCI
+#define CONFIG_USB_OHCI_S3C24XX
 #define CONFIG_USB_KEYBOARD
 #define CONFIG_USB_STORAGE
 #define CONFIG_DOS_PARTITION
@@ -105,7 +103,6 @@
 #define CONFIG_CMD_USB
 
 #define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #define CONFIG_CMDLINE_EDITING
 
 /* autoboot */
@@ -136,8 +133,7 @@
 #define CONFIG_SYS_MAXARGS	16
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
 
-/* may be activated as soon as s3c24x0 has print_cpuinfo support */
-/*#define CONFIG_DISPLAY_CPUINFO*/		/* Display cpu info */
+#define CONFIG_DISPLAY_CPUINFO				/* Display cpu info */
 
 #define CONFIG_SYS_MEMTEST_START	0x30000000	/* memtest works on */
 #define CONFIG_SYS_MEMTEST_END		0x33F00000	/* 63 MB in DRAM */
@@ -146,25 +142,11 @@
 
 #define CONFIG_SYS_HZ			1000
 
-/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
 /* support additional compression methods */
 #define CONFIG_BZIP2
 #define CONFIG_LZO
 #define CONFIG_LZMA
 
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE	(128*1024)	/* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ	(4*1024)	/* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ	(4*1024)	/* FIQ stack */
-#endif
-
 /*-----------------------------------------------------------------------
  * Physical Memory Map
  */
@@ -212,7 +194,6 @@
 #define CONFIG_NAND_S3C2410
 #define CONFIG_SYS_S3C2410_NAND_HWECC
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define NAND_MAX_CHIPS			1
 #define CONFIG_SYS_NAND_BASE		0x4E000000
 #endif