X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fsnapper9260.h;h=d3e73f209759edb5f2994449cce5fbe2f823baeb;hb=a55d29d2ac658b33989a7c4c368beff46a98bcde;hp=70ef9395d7744739ed1217a5a1529cdc667d9549;hpb=1254ff97abb7606ccd0d7bdcd9f22581c50fe535;p=u-boot

diff --git a/include/configs/snapper9260.h b/include/configs/snapper9260.h
index 70ef9395d7..d3e73f2097 100644
--- a/include/configs/snapper9260.h
+++ b/include/configs/snapper9260.h
@@ -20,7 +20,6 @@
 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_MAIN_CLOCK	18432000 /* External Crystal, in Hz */
 #define CONFIG_SYS_AT91_SLOW_CLOCK	32768
-#define CONFIG_SYS_GENERIC_BOARD
 
 /* CPU */
 #define CONFIG_ARCH_CPU_INIT
@@ -29,8 +28,6 @@
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
 #define CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_FIT
 
 /* SDRAM */
 #define CONFIG_NR_DRAM_BANKS		1
@@ -45,7 +42,6 @@
 
 /* NAND Flash */
 #define CONFIG_NAND_ATMEL
-#define CONFIG_SYS_NO_FLASH
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_SYS_NAND_BASE		ATMEL_BASE_CS3
 #define CONFIG_SYS_NAND_DBW_8
@@ -67,12 +63,10 @@
 #define CONFIG_USB_ATMEL
 #define CONFIG_USB_ATMEL_CLK_SEL_PLLB
 #define CONFIG_USB_OHCI_NEW
-#define CONFIG_DOS_PARTITION
 #define CONFIG_SYS_USB_OHCI_CPU_INIT
 #define CONFIG_SYS_USB_OHCI_REGS_BASE	ATMEL_UHP_BASE
 #define CONFIG_SYS_USB_OHCI_SLOT_NAME	"at91sam9260"
 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	2
-#define CONFIG_USB_STORAGE
 
 /* GPIOs and IO expander */
 #define CONFIG_ATMEL_LEGACY
@@ -88,8 +82,6 @@
 #define CONFIG_USART_BASE		ATMEL_BASE_DBGU
 #define CONFIG_USART_ID			ATMEL_ID_SYS
 #endif
-#define CONFIG_BAUDRATE			115200
-#define CONFIG_SYS_PROMPT		"Snapper> "
 
 /* I2C - Bit-bashed */
 #define CONFIG_SYS_I2C
@@ -120,8 +112,6 @@
 
 /* Boot options */
 #define CONFIG_SYS_LOAD_ADDR		0x23000000
-#define CONFIG_BOOTDELAY		3
-#define CONFIG_ZERO_BOOTDELAY_CHECK
 
 #define CONFIG_BOOTP_BOOTFILESIZE
 #define CONFIG_BOOTP_BOOTPATH
@@ -143,19 +133,11 @@
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_HUSH_PARSER
 
 /* U-Boot memory settings */
 #define CONFIG_SYS_MALLOC_LEN		(1 << 20)
 
 /* Command line configuration */
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_GPIO
-#define CONFIG_CMD_USB
-#define CONFIG_CMD_MII
 #define CONFIG_CMD_NAND
 #define CONFIG_CMD_PCA953X
 #define CONFIG_CMD_PCA953X_INFO