X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fstxgp3.h;h=5fb40ebf8ba534e791b02d79a596b4a12c7bc67b;hb=32d019265d1f0c334f2f86407abf295d46bd2f4d;hp=80b46a0033a56add2395c61d468e28d5b9e9c501;hpb=1a4596601fd395f3afb8f82f3f840c5e00bdd57a;p=u-boot

diff --git a/include/configs/stxgp3.h b/include/configs/stxgp3.h
index 80b46a0033..5fb40ebf8b 100644
--- a/include/configs/stxgp3.h
+++ b/include/configs/stxgp3.h
@@ -7,7 +7,7 @@
  * (C) Copyright 2002,2003 Motorola,Inc.
  * Xianghua Xiao <X.Xiao@motorola.com>
  *
- * SPDX-License-Identifier:	GPL-2.0+ 
+ * SPDX-License-Identifier:	GPL-2.0+
  */
 
 /* mpc8560ads board configuration file */
@@ -22,7 +22,6 @@
 /* High Level Configuration Options */
 #define CONFIG_BOOKE		1	/* BOOKE		*/
 #define CONFIG_E500		1	/* BOOKE e500 family	*/
-#define CONFIG_MPC85xx		1	/* MPC8540/MPC8560	*/
 #define CONFIG_CPM2		1	/* has CPM2 */
 #define CONFIG_STXGP3		1	/* Silicon Tx GPPP board specific*/
 #define CONFIG_MPC8560		1
@@ -98,7 +97,7 @@
 #define CONFIG_SYS_CCSRBAR_PHYS_LOW	CONFIG_SYS_CCSRBAR
 
 /* DDR Setup */
-#define CONFIG_FSL_DDR1
+#define CONFIG_SYS_FSL_DDR1
 #define CONFIG_SPD_EEPROM		/* Use SPD EEPROM for DDR setup*/
 #define CONFIG_DDR_SPD
 #undef CONFIG_FSL_DDR_INTERACTIVE
@@ -162,18 +161,18 @@
 /*
  * I2C
  */
-#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C		/* I2C with hardware support*/
-#undef	CONFIG_SOFT_I2C			/* I2C bit-banged */
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address	*/
-#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+
 #if 0
 #define CONFIG_SYS_I2C_NOPROBES        {0x00}  /* Don't probe these addrs */
 #else
 /* I did the 'if 0' so we could keep the syntax above if ever needed. */
 #undef CONFIG_SYS_I2C_NOPROBES
 #endif
-#define CONFIG_SYS_I2C_OFFSET		0x3000
 
 /* RapdIO Map configuration, mapped 1:1.
 */
@@ -331,7 +330,6 @@
 #define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 #define CONFIG_SYS_LOAD_ADDR	0x1000000	/* default load address */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
 
 /*
  * For booting Linux, the board info and command line data
@@ -342,7 +340,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*Note: change below for your network setting!!! */