X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fstxssa.h;h=996120a02b1b022df4d8e1cf3f0d2abd8b29801b;hb=7842fb7c4f5be961c7aa9091dc8c760683b1377c;hp=c312f1af9dd061d625599bfb7170377dfd527359;hpb=ba490b7761c62b549c222a9723e532dc801a3899;p=u-boot

diff --git a/include/configs/stxssa.h b/include/configs/stxssa.h
index c312f1af9d..996120a02b 100644
--- a/include/configs/stxssa.h
+++ b/include/configs/stxssa.h
@@ -43,6 +43,8 @@
 #define CONFIG_STXSSA		1	/* Silicon Tx GPPP SSA board specific*/
 #define CONFIG_MPC8560		1
 
+#define	CONFIG_SYS_TEXT_BASE	0xFFFC0000
+
 #define CONFIG_PCI			/* PCI ethernet support	*/
 #define CONFIG_TSEC_ENET		/* tsec ethernet support*/
 #undef CONFIG_ETHER_ON_FCC		/* cpm FCC ethernet support */
@@ -109,7 +111,7 @@
 #define CONFIG_SYS_BR1_PRELIM		0xFB001801	/* 32-bit port */
 #define CONFIG_SYS_OR1_PRELIM		0xFFFF0FF7	/* 64K is enough */
 
-#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE	/* start of monitor	*/
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE	/* start of monitor	*/
 
 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 #define CONFIG_SYS_RAMBOOT
@@ -165,10 +167,9 @@
 
 #define CONFIG_SYS_INIT_RAM_LOCK	1
 #define CONFIG_SYS_INIT_RAM_ADDR	0x60000000	/* Initial RAM address	*/
-#define CONFIG_SYS_INIT_RAM_END	0x4000		/* End of used area in RAM */
+#define CONFIG_SYS_INIT_RAM_SIZE	0x4000		/* Size of used area in RAM */
 
-#define CONFIG_SYS_GBL_DATA_SIZE	128		/* num bytes initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 #define CONFIG_SYS_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Mon */
@@ -176,7 +177,6 @@
 
 /* Serial Port */
 #define CONFIG_CONS_INDEX     2
-#undef	CONFIG_SERIAL_SOFTWARE_FIFO
 #define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	1
@@ -189,6 +189,7 @@
 #define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_CCSRBAR+0x4600)
 
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
+#define CONFIG_AUTO_COMPLETE	1	/* add autocompletion support   */
 #define CONFIG_SYS_HUSH_PARSER		1	/* Use the HUSH parser		*/
 #ifdef	CONFIG_SYS_HUSH_PARSER
 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
@@ -353,6 +354,7 @@
 #define CONFIG_CMD_NFS
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_SNTP
+#define CONFIG_CMD_REGINFO
 
 #if defined(CONFIG_PCI)
     #define CONFIG_CMD_PCI
@@ -363,7 +365,7 @@
 #endif
 
 #if defined(CONFIG_SYS_RAMBOOT)
-    #undef CONFIG_CMD_ENV
+    #undef CONFIG_CMD_SAVEENV
     #undef CONFIG_CMD_LOADS
 #else
     #define CONFIG_CMD_ELF
@@ -395,14 +397,6 @@
  */
 #define CONFIG_SYS_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM	0x02		/* Software reboot		*/
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */