X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fsunxi-common.h;h=b0bfc0dfd7daecdf99a09a269e54532fa862833a;hb=5991703e88f320767d9390d64a6a9bd62560696b;hp=f64edd4b0fe0aba46bd07e632583c7a0b75c76a3;hpb=b89dfcfd926b8224edd24608065eb9bb601c0d3b;p=u-boot

diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
index f64edd4b0f..b0bfc0dfd7 100644
--- a/include/configs/sunxi-common.h
+++ b/include/configs/sunxi-common.h
@@ -35,7 +35,6 @@
 /*
  * High Level Configuration Options
  */
-#define CONFIG_SUNXI		/* sunxi family */
 #ifdef CONFIG_SPL_BUILD
 #define CONFIG_SYS_THUMB_BUILD	/* Thumbs mode to save space in SPL */
 #endif
@@ -54,7 +53,6 @@
 #endif
 
 /* CPU */
-#define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_TIMER_CLK_FREQ		24000000
 
 /*
@@ -69,7 +67,6 @@
 #define CONFIG_SYS_SDRAM_BASE		0x20000000
 #define CONFIG_SYS_LOAD_ADDR		0x22000000 /* default load address */
 #define CONFIG_SYS_TEXT_BASE		0x2a000000
-#define CONFIG_PRE_CON_BUF_ADDR		0x2f000000
 /* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here 
  * since it needs to fit in with the other values. By also #defining it
  * we get warnings if the Kconfig value mismatches. */
@@ -80,7 +77,6 @@
 #define CONFIG_SYS_SDRAM_BASE		0x40000000
 #define CONFIG_SYS_LOAD_ADDR		0x42000000 /* default load address */
 #define CONFIG_SYS_TEXT_BASE		0x4a000000
-#define CONFIG_PRE_CON_BUF_ADDR		0x4f000000
 /* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here 
  * since it needs to fit in with the other values. By also #defining it
  * we get warnings if the Kconfig value mismatches. */
@@ -99,7 +95,7 @@
  * the 1 actually activates the mapping of the first 32 KiB to 0x00000000.
  */
 #define CONFIG_SYS_INIT_RAM_ADDR	0x10000
-#define CONFIG_SYS_INIT_RAM_SIZE	0xA000	/* 40 KiB */
+#define CONFIG_SYS_INIT_RAM_SIZE	0x08000	/* FIXME: 40 KiB ? */
 #else
 #define CONFIG_SYS_INIT_RAM_ADDR	0x0
 #define CONFIG_SYS_INIT_RAM_SIZE	0x8000	/* 32 KiB */
@@ -134,13 +130,11 @@
 
 #ifdef CONFIG_NAND_SUNXI
 #define CONFIG_SYS_NAND_MAX_ECCPOS 1664
-#define CONFIG_SPL_NAND_SUPPORT 1
 #define CONFIG_SYS_NAND_ONFI_DETECTION
 #define CONFIG_SYS_MAX_NAND_DEVICE 8
 #endif
 
 #ifdef CONFIG_SPL_SPI_SUNXI
-#define CONFIG_SPL_SPI_FLASH_SUPPORT	1
 #define CONFIG_SYS_SPI_U_BOOT_OFFS	0x8000
 #endif
 
@@ -151,6 +145,7 @@
 #define CONFIG_MMC_SUNXI_SLOT		0
 #define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_SYS_MMC_ENV_DEV		0	/* first detected MMC controller */
+#define CONFIG_SYS_MMC_MAX_DEVICE	4
 #endif
 
 /* 64MB of malloc() pool */
@@ -180,8 +175,6 @@
 #define CONFIG_SYS_NO_FLASH
 
 #define CONFIG_SYS_MONITOR_LEN		(768 << 10)	/* 768 KiB */
-#define CONFIG_IDENT_STRING		" Allwinner Technology"
-#define CONFIG_DISPLAY_BOARDINFO
 
 #define CONFIG_ENV_OFFSET		(544 << 10) /* (8 + 24 + 512) KiB */
 #define CONFIG_ENV_SIZE			(128 << 10)	/* 128 KiB */
@@ -189,9 +182,6 @@
 #define CONFIG_FAT_WRITE	/* enable write access */
 
 #define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
 
 #define CONFIG_SPL_BOARD_LOAD_IMAGE
 
@@ -206,21 +196,15 @@
 #define CONFIG_SPL_MAX_SIZE		0x5fc0		/* 24KB on sun4i/sun7i */
 #endif
 
-#define CONFIG_SPL_LIBDISK_SUPPORT
-
-#ifdef CONFIG_MMC
-#define CONFIG_SPL_MMC_SUPPORT
-#endif
-
 #ifndef CONFIG_ARM64
 #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/sunxi/u-boot-spl.lds"
 #endif
 
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	80	/* 40KiB */
 #define CONFIG_SPL_PAD_TO		32768		/* decimal for 'dd' */
 
 #if defined(CONFIG_MACH_SUN9I) || defined(CONFIG_MACH_SUN50I)
-#define LOW_LEVEL_SRAM_STACK		0x0001A000
+/* FIXME: 40 KiB instead of 32 KiB ? */
+#define LOW_LEVEL_SRAM_STACK		0x00018000
 #define CONFIG_SPL_STACK		LOW_LEVEL_SRAM_STACK
 #else
 /* end of 32 KiB in sram */
@@ -231,7 +215,6 @@
 /* I2C */
 #if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \
     defined CONFIG_SY8106A_POWER
-#define CONFIG_SPL_I2C_SUPPORT
 #endif
 
 #if defined CONFIG_I2C0_ENABLE || defined CONFIG_I2C1_ENABLE || \
@@ -265,7 +248,6 @@ extern int soft_i2c_gpio_scl;
 #if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \
     defined CONFIG_AXP221_POWER || defined CONFIG_AXP818_POWER || \
     defined CONFIG_SY8106A_POWER
-#define CONFIG_SPL_POWER_SUPPORT
 #endif
 
 #ifndef CONFIG_CONS_INDEX
@@ -292,7 +274,6 @@ extern int soft_i2c_gpio_scl;
 
 /* GPIO */
 #define CONFIG_SUNXI_GPIO
-#define CONFIG_SPL_GPIO_SUPPORT
 
 #ifdef CONFIG_VIDEO
 /*
@@ -306,17 +287,13 @@ extern int soft_i2c_gpio_scl;
 
 #define CONFIG_VIDEO_SUNXI
 
-#define CONFIG_CFB_CONSOLE
-#define CONFIG_VIDEO_SW_CURSOR
 #define CONFIG_VIDEO_LOGO
 #define CONFIG_VIDEO_STD_TIMINGS
 #define CONFIG_I2C_EDID
 #define VIDEO_LINE_LEN (pGD->plnSizeX)
 
 /* allow both serial and cfb console. */
-#define CONFIG_CONSOLE_MUX
 /* stop x86 thinking in cfbconsole from trying to init a pc keyboard */
-#define CONFIG_VGA_AS_SINGLE_DEVICE
 
 #endif /* CONFIG_VIDEO */
 
@@ -346,15 +323,10 @@ extern int soft_i2c_gpio_scl;
 #endif
 
 #ifdef CONFIG_USB_MUSB_GADGET
-#define CONFIG_USB_FUNCTION_DFU
 #define CONFIG_USB_FUNCTION_FASTBOOT
 #define CONFIG_USB_FUNCTION_MASS_STORAGE
 #endif
 
-#ifdef CONFIG_USB_FUNCTION_DFU
-#define CONFIG_DFU_RAM
-#endif
-
 #ifdef CONFIG_USB_FUNCTION_FASTBOOT
 #define CONFIG_CMD_FASTBOOT
 #define CONFIG_FASTBOOT_BUF_ADDR	CONFIG_SYS_LOAD_ADDR
@@ -373,9 +345,7 @@ extern int soft_i2c_gpio_scl;
 #endif
 
 #ifdef CONFIG_USB_KEYBOARD
-#define CONFIG_CONSOLE_MUX
 #define CONFIG_PREBOOT
-#define CONFIG_SYS_STDIO_DEREGISTER
 #define CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE
 #endif
 
@@ -387,15 +357,10 @@ extern int soft_i2c_gpio_scl;
 #endif
 
 #define CONFIG_MISC_INIT_R
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
 
 #ifndef CONFIG_SPL_BUILD
 #include <config_distro_defaults.h>
 
-/* Enable pre-console buffer to get complete log on the VGA console */
-#define CONFIG_PRE_CONSOLE_BUFFER
-#define CONFIG_PRE_CON_BUF_SZ		4096 /* Aprox 2 80*25 screens */
-
 #ifdef CONFIG_ARM64
 /*
  * Boards seem to come with at least 512MB of DRAM.